What is the Xiaop car?

1 Answers
OGavin
07/29/25 6:37pm
Xiaop is a new energy electric vehicle. The following are specific introductions to XPeng Motors: 1. Pure electric drive system: XPeng Motors' pure electric drive system is centered around the motor, battery, and electronic control. Among these, the motor controller, DCDC, charger, etc., are placed in the front compartment, while the battery system is arranged under the floor of the passenger compartment. The initial version of XPeng Motors' motor has a power density of 10kW/L, with a target to reach 14.5kW/L, which is more than double the domestic average. 2. Intelligent system: The large central control screen replaces traditional physical buttons, substituting them with a series of virtual buttons. XPeng Motors' intelligent control system focuses on intelligent control of the vehicle itself, rather than simple internet entertainment.
Was this review help?
15
3
Share
More Forum Discussions

What Happens If You Exceed the Maintenance Mileage?

Exceeding the recommended maintenance mileage for your vehicle can have the following consequences: 1. Increased engine wear: If the engine oil is used beyond its recommended mileage, its fluidity deteriorates, leading to increased engine wear and higher fuel consumption. In severe cases, it can cause issues like unexpected engine shutdown, especially in turbocharged engines. 2. Higher risk of engine overheating: If the coolant is used beyond its maintenance mileage, the engine is more likely to show high-temperature warnings. Additionally, the cooling system is prone to scaling, reducing the engine's heat dissipation efficiency and increasing the risk of overheating or even fire. 3. Brake system inefficiency or failure: Exceeding the maintenance mileage for the brake system can cause brake fluid degradation. Prolonged braking raises the temperature of the brake fluid, lowering its boiling point. Once it boils, the brake system may become weak or fail entirely. Ways to avoid exceeding maintenance mileage: 1. When your vehicle approaches the recommended maintenance mileage, the onboard information system will usually alert you. While exceeding by 500-1,000 km may not cause significant harm, it's still advisable to follow the maintenance schedule. 2. Before long-distance trips, check your vehicle's technical condition and ensure proper tire pressure to avoid unexpected issues. 3. If your vehicle has already exceeded the maintenance mileage, take it to a repair shop promptly for servicing. Delaying maintenance can lead to more severe problems.
14
3
Share

What causes oil stains on the engine cover?

It's normal. The car has been used for too long, and the engine oil seal has aged, unable to retain the oil. Concept: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (such as Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, an internal combustion engine typically converts chemical energy into mechanical energy. Classification: Internal combustion engines, external combustion engines. External combustion engines refer to those where the fuel burns outside the engine, such as gas turbines and jet engines.
1
1
Share

How to Deal with Exhaust Pipe Blockage in China 5 Diesel Vehicles?

SCR catalyst must be cleaned after blockage, and if the blockage persists for too long, the entire assembly needs to be replaced. Below are the specific details of vehicle emission standards: 1. China 3 Emission Standard: Implementation dates are July 1, 2009, for light-duty diesel vehicles; July 1, 2010, for heavy-duty gasoline vehicles; July 1, 2008, for heavy-duty gas vehicles and heavy-duty diesel vehicles. 2. China 4 Emission Standard: Nationwide implementation dates are July 1, 2013, for light-duty diesel vehicles; July 1, 2013, for heavy-duty gasoline vehicles; January 1, 2011, for heavy-duty gas vehicles; July 1, 2013, for heavy-duty diesel vehicles. 3. China 5 Emission Standard: Nationwide implementation began on July 1, 2017, with nitrogen oxide emissions reduced by 25% compared to the China 4 standard, and additional PM emission limits were introduced, making it more stringent. 4. China 6 Emission Standard: The China 6 standard is divided into two phases, 6A and 6B. The first phase starts on July 1, 2020, prohibiting the sale, registration, and licensing of vehicles below the 6A emission standard; the second phase starts on July 1, 2023, prohibiting the sale, registration, and licensing of vehicles below the 6B emission standard.
12
0
Share

What material is the Audi Q5L body made of?

Audi Q5L body material: 1. Exterior The Q5L uses high-cost imported aluminum materials in multiple parts of the vehicle, reducing the overall weight by 100KG compared to the previous generation. It features aluminum front and rear five-link suspension systems, which cost five times more than iron suspensions but result in lighter unsprung mass. Additionally, the engine hood and tailgate are made of aluminum, and even the brake pedal linkage is aluminum alloy. 2. Interior The Q5L undergoes volatile treatment for interior leather and plastic materials, with all indicators strictly meeting national standards. To further maintain clean cabin air, the Q5L is equipped with a three-zone air conditioning system.
11
4
Share

Location of the Trunk Switch in Audi Cars?

Audi car trunk switch location: 1. To open the vehicle trunk, the car must first be parked and stabilized, otherwise the button will not function. 2. For the Audi A6L, the interior trunk switch button is located on the left side of the driver's seat, where there is a row of buttons. Find the button depicting the open trunk state and press it. 3. Press and hold the "car logo" button in the center of the remote key for 3 seconds to unlock it, but it won't pop open by itself; you need to gently lift the lid. 4. When opening the trunk from inside the car, be sure to check the rearview mirror for any obstacles behind to prevent accidents.
10
2
Share

What is the plastic component beneath the rear bumper of an Audi A3?

What is the plastic component beneath the rear bumper of an Audi A3: 1. In our daily life, what we commonly refer to as the front and rear bumpers of a car are actually just part of the true bumper. 2. Taking the front bumper as an example, the real bumper consists of a plastic bumper shell, a front crash beam, two energy-absorbing boxes on the left and right, and other installation components. 3. Among these, the plastic bumper shell is what we often refer to as the front bumper. In the past, the front crash beams of many car models were located in front of the bumper shell, which is an external design, such as the old Santana models still seen today. 4. However, as people's demands for car styling have increased, the front crash beam is generally designed to be wrapped by the bumper shell, known as a rear-mounted design.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.