What is the wiper size for the Venucia D50?

2 Answers
OAaron
08/28/25 7:12am
The wiper size for the Venucia D50 is 18 inches. Common sizes: Common wiper sizes correspond to rubber blade lengths: 14 inches is 350mm, 15 inches is 375mm, 16 inches is 400mm, 17 inches is 425mm, 18 inches is 450mm, 19 inches is 475mm, 20 inches is 500mm, 21 inches is 525mm, 22 inches is 550mm, 24 inches is 600mm, 26 inches is 650mm. Precautions: Wipers are rubber products and should ideally be replaced annually. If the wiper's water-clearing ability declines, it will be difficult to observe road conditions during rainy weather. Before daily use, clean the windshield to prevent sand particles on the glass from damaging the wiper blades and reducing their lifespan.
Was this review help?
3
3
Share
McTalia
09/10/25 5:25am
I remember driving the Venucia D50 several times, and the wiper sizes are usually 16 inches for the driver's side and 14 inches for the passenger side—that's the standard design for this car. Why is this so important? When driving in the rain, ineffective wipers can obstruct your vision, especially on highways where safety comes first. I once experienced aged wipers that I didn’t replace in time, and during heavy rain, I could barely see the road—it was extremely dangerous and almost caused an accident. I recommend checking the wiper blades every six months. If you notice cracks or water streaks after wiping, it’s time to replace them. Buying a pair online is very affordable, costing around 30 yuan, and brands like Bosch or local ones work well. Don’t overlook this small detail in daily driving—safe driving starts with the details.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

How many days in advance can I cancel the Subject 2 test?

Cancellation of the Subject 2 test requires at least one day's advance notice. According to relevant regulations, if a candidate needs to cancel the test after scheduling it on the "Traffic Management 12123" platform, the cancellation must be requested before the application deadline for the test plan. If the appointment is successful, the candidate must visit the vehicle management office at least one day in advance to complete the cancellation procedure. Below are the relevant steps for canceling the test: 1. If the appointment is not yet successful: Open the "Traffic Management 12123" app, locate the test appointment application you wish to cancel, and cancel it directly. 2. If the appointment is already successful: (1). Prepare documents: Bring the original ID card and a photocopy. (2). Sign the document: On the blank space of the ID photocopy, write "I voluntarily cancel the Subject 3 test scheduled for xx/xx/xxxx at xx driving school" and sign it. (3). Submit the application: Bring the ID card and photocopy to the vehicle management office's service window to submit the application. The cancellation will be processed once the staff accepts it. (4). Verification: If you cannot handle the cancellation in person, you may authorize someone else to do it on your behalf. The authorized person must also submit their original ID card and photocopy for verification by the staff.
11
0
Share

What Are the Differences Between Twin-Cylinder and Single-Cylinder Engines?

Differences between twin-cylinder and single-cylinder engines are as follows: 1. Price: A single-cylinder engine has only one cylinder with a simple structure and lower cost, but it produces slightly more vibration and noise. A twin-cylinder engine has two cylinders, offering better stability, reduced vibration and noise, but comes at a higher price, making it a higher-tier option compared to single-cylinder engines. 2. Engine Power Output: A single-cylinder engine delivers stronger power output at low to medium RPMs compared to a twin-cylinder engine of the same displacement. Therefore, single-cylinder engines perform better in acceleration during startup and low-speed conditions. However, twin-cylinder engines can more easily reach high RPMs, making them more suitable for large-displacement motorcycles. 3. Fuel Consumption: (1) Single-cylinder engine: During operation, the air-fuel mixture in the cylinder ignites once every one or two revolutions of the crankshaft. (2) Twin-cylinder engine: Consists of two single cylinders arranged on one engine block sharing a single crankshaft for power output. It is mainly used in car engines, motorcycles, and other small-power machinery.
3
3
Share

What is the fuel tank capacity of the Boyue?

The fuel tank capacity of the Boyue is 60 liters. The Boyue is positioned as a compact SUV, with body dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, and a wheelbase of 2670mm. It features front-wheel drive, with a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear. The Boyue is equipped with a 1.8T turbocharged engine paired with a 6-speed manual transmission. This engine delivers a maximum power of 120kW and a maximum torque of 250Nm. Additionally, the engine incorporates direct fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block.
16
5
Share

What kind of car is Peugeot?

Peugeot is a French automobile brand. The Peugeot 408 is positioned as a compact car with body dimensions of 4750mm in length, 1820mm in width, and 1488mm in height, and a wheelbase of 2730mm. It features front-engine, front-wheel-drive layout. The front suspension employs MacPherson strut independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The Peugeot 408 is equipped with a 1.2T turbocharged engine paired with a 6-speed dual-clutch transmission. This engine delivers a maximum power output of 100kW and peak torque of 230Nm. Additionally, the engine incorporates direct fuel injection technology and utilizes an aluminum alloy cylinder head and block.
5
4
Share

Is a Residence Permit Required to Obtain a Driver's License in Tianjin?

In the latest driver's license examination reform of 2019, the requirement for a residence permit has been abolished. Registration can now be done with just a personal ID card. In addition to the ID card, several one-inch white-background portrait photos are required. Then, there is the medical examination certificate, which can be done through the driving school after registration or at a hospital by oneself. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," applications for a motor vehicle driver's license must be submitted to the vehicle management office in accordance with the following provisions: 1. For residents living in their registered permanent residence, the application should be submitted at the location of the registered permanent residence; 2. For residents living outside their registered permanent residence, the application can be submitted at the place of residence; 3. Active military personnel (including armed police) should submit their application at their place of residence; 4. Foreign nationals should submit their application at their place of residence or stay; 5. For applications to increase the permitted vehicle types, the application should be submitted at the place where the original motor vehicle driver's license was issued; 6. For those undergoing full-time driving vocational education and applying to increase the permitted vehicle types for large buses or tractors, the application should be submitted at the place of education.
19
1
Share

What do the PRNDSL gears mean respectively?

PRNDSL gears respectively refer to: 1. P gear is the parking gear, used for parking, which utilizes a mechanical device to lock the transmission part of the car, preventing the car from moving; 2. R gear is the reverse gear, used for reversing the vehicle. Usually, you need to press the safety button on the shift lever to move it to the R gear; 3. N gear is the neutral gear. When the shift lever is placed in the N gear, the power between the engine and the transmission is cut off and separated; 4. D gear is the drive gear, used for normal road driving. When the shift lever is placed in the D gear, the driver can control the speed simply by adjusting the accelerator pedal; 5. S gear is the sport gear. In the S sport mode, the transmission can shift freely; 6. L gear is the low gear, used when the car is climbing a slope, allowing the car to obtain greater power.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.