···
Log in / Register

What is the windshield defrost symbol?

3 Answers
JudeLee
07/29/25 9:29pm
The symbol for the car air conditioner's windshield defrost function typically features three upward-curving wavy lines in a fan shape or rectangular shape. Different car models may have variations in this symbol, but most vehicles share a similar button design. How to deal with foggy windshields: 1. Cold air defogging: Locate the front windshield defrost button, set the fan speed to maximum, turn on the A/C switch, and adjust the temperature to the lowest setting. The fog on the glass will disappear shortly. Some vehicle models also feature rear windshield and side mirror heating elements - activating these switches will typically clear fog within about one minute. 2. Warm air defogging: If the car has just been started, wait a few minutes for the engine to warm up and the coolant temperature to rise before activating the heating system. Set the airflow to maximum and engage the front windshield defrost mode. The fog should disappear within minutes. One disadvantage of using warm air defogging in winter is that it initially creates more condensation on the interior glass, requiring some time before becoming effective.
Was this review help?
1
5
Share
VanJasper
08/15/25 8:25pm
I've been driving for many years and often encounter the problem of foggy windows obstructing visibility. The windshield defroster button is an icon resembling wind blowing towards a rectangular glass, usually located in the most prominent position on the climate control panel. Pressing it activates the fan to blow air directly onto the windshield, specifically designed for defogging and defrosting, making it extremely convenient to use. When the weather is cold or rainy and the glass tends to fog up, I press it immediately, and combining it with the air conditioning's cold or hot air yields even better results. During routine car maintenance and air conditioning checks, I also make sure this button functions properly to avoid failure at critical moments. Remember not to keep it on continuously for too long to prevent the fan from overheating and affecting the system's lifespan. Safe driving comes first, so ensure clear visibility before hitting the road. Though a small feature, it's highly practical and worth mastering for both novice and experienced drivers.
Was this review help?
4
3
Share
Expand All
VonCody
10/17/25 4:08am
Over the past few years of commuting by car, that windshield defroster symbol has been a frequently used feature icon. It looks like a fan blowing air onto a pane of glass, located among the AC buttons near the steering wheel. Pressing it activates the fan to direct airflow specifically at the windshield for defogging—most useful during summer rain or winter mornings when condensation forms. I've found that increasing the fan speed clears fog faster, but avoid keeping it on constantly to save fuel. Always keep a cleaning cloth handy to wipe the glass and prevent lingering moisture, and remember to replace the AC filter regularly to maintain airflow efficiency. Make it a habit to check these buttons while driving to avoid fumbling during critical moments.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

What is inside a three-way catalytic converter?

A three-way catalytic converter contains three precious metals: platinum (Pt), rhodium (Rh), and palladium (Pd). It is called "three-way" because these three precious metals facilitate the reaction of the three main harmful gases produced after engine combustion, ultimately converting them into harmless carbon dioxide, nitrogen dioxide, and water. The three-way catalytic converter is a crucial external purification device in a car's exhaust system. Its primary function is to convert harmful gases emitted by the engine into harmless ones. The three-way catalytic converter is located in the first section of the car's exhaust pipe and resembles a canteen in shape. It is equipped with an oxygen sensor. If removed, it will affect the closed-loop control of oxygen concentration, thereby impacting fuel injection control and throttle opening, polluting the environment, and causing the vehicle to fail the emissions test during annual inspections.
4
2
Share

How to Successfully Pass the Subject 2 Driving Test?

Methods to successfully pass the Subject 2 driving test: 1. When performing parallel parking, ensure that the vehicle does not cross the lines after stopping in the parking space, does not hit the poles, the tires do not touch the lane boundaries, and the engine does not stall; 2. During the hill start and stop test, make sure the car's bumper is aligned with the pole line, the body is no more than 30 cm from the test boundary line, does not roll backward when starting, and the engine does not stall; 3. When making a 90-degree turn, ensure the wheels do not touch the exit point or the boundary line, and do not use reverse gear to complete the turn; 4. When navigating continuous obstacles, follow the designated route strictly, ensuring the wheels do not go out of or touch the boundary lines, and do not hit or run over the round obstacles; 5. During the single-plank bridge test, ensure all four wheels of the car are on the bridge, and once on the bridge, the wheels do not fall off the bridge surface.
2
4
Share

Where is the OBD interface located in the BMW 3 Series?

The OBD interface of the BMW 3 Series is located near the driver's footwell. Bend down and position your head near the clutch area, then look upwards with a flashlight to spot the interface, which is the OBD port. The BMW 3 Series has a body length of 4719mm, width of 1827mm, height of 1459mm, and a wheelbase of 2851mm. The car features a front-engine, rear-wheel-drive layout. It is equipped with a 2.0T turbocharged engine paired with an 8-speed automatic transmission. This engine delivers a maximum power of 115kW and a peak torque of 250Nm. It also incorporates direct fuel injection technology and utilizes an aluminum alloy cylinder head and block.
7
4
Share

What engine does the Audi S3 use?

Audi S3 uses a 2.0T turbocharged engine, paired with a 7-speed dual-clutch transmission. This engine has a maximum power of 213 kW, a maximum torque of 380 Nm, a maximum power speed range of 5400 to 6500 rpm, and a maximum torque speed range of 1850 to 5300 rpm. It is also equipped with hybrid injection technology and uses an aluminum cylinder head and cast iron cylinder block. The Audi S3 has a body length, width, and height of 4474 mm, 1796 mm, and 1392 mm respectively, with a wheelbase of 2628 mm. The car features front-engine, four-wheel drive, with MacPherson strut independent suspension in the front and multi-link independent suspension in the rear.
17
0
Share

How long does it take to service a car?

Car servicing can take as little as forty minutes or as long as two to three hours, depending on the number of maintenance items and whether there are available workstations in the workshop. Therefore, it is recommended that car owners make an appointment in advance by phone. Cars should be serviced at a 4S shop every 5,000 kilometers. Maintenance items include: changing the engine oil, replacing the oil filter, checking and replenishing the auxiliary water tank level, checking and replenishing the windshield washer fluid, checking and replenishing the tire pressure of all four wheels, and routine engine cleaning. The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service life.
15
4
Share

Where is the cabin air filter located in the Ford Kuga?

The cabin air filter in the Ford Kuga is located inside the glove compartment on the passenger side. The function of the cabin air filter is to filter out odors, pollen, dust, harmful gases, and various unpleasant smells. The filter can also efficiently trap and absorb particulate impurities, achieving oil filtration and air purification performance, while effectively removing organic gases such as benzene, phenol, ammonia, formaldehyde, xylene, and styrene. The dimensions of the Kuga are 4524mm in length, 1838mm in width, and 1685mm in height, with a wheelbase of 2690mm. The vehicle is equipped with a 1.5T turbocharged engine paired with a 6-speed automatic transmission. This engine delivers a maximum power output of 134kW and a peak torque of 243Nm.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.