···
Log in / Register

What is the width of a fire lane?

3 Answers
McNora
09/04/25 4:48am
Fire lanes must have a width of at least 4 meters. Below are relevant details: 1. Fire Lane: A fire lane refers to a roadway designated for fire truck access during emergencies. Regulations stipulate that fire lanes must maintain a minimum clear width and height of 4.0 meters, and parking is prohibited to prevent obstruction during fire incidents. 2. Architectural Design Fire Safety Standards: According to China's "Code for Fire Protection Design of Buildings," fire lanes must have a minimum clear height and width of 4 meters, with turning radii meeting specified requirements. Typically, standard fire trucks require a turning radius ≥9 meters, while aerial ladder trucks need ≥12 meters. This means if residential roads fail to meet these specifications, fire trucks may be unable to access and deploy effectively during emergencies.
Was this review help?
4
2
Share
SanAyla
09/16/25 5:52am
The width of a fire lane must be at least 4 meters to ensure smooth entry and exit for fire trucks. Having experienced many emergencies myself, I've found that narrow lanes can cause vehicles to get stuck, delaying rescue efforts. The national standard GB 50016 clearly specifies the minimum width to guarantee sufficient space for fire trucks to pass through. Additionally, the turning radius should be large enough, generally no less than 6 meters, otherwise, obstacles may be hit during turns. I advise everyone to pay attention to community lanes: avoid parking or placing debris that could block them—these small actions can save lives. Regularly check the width; if it's less than 4 meters, report it to the property management for renovation immediately—don't wait for an accident to regret it. In short, maintaining spacious lanes is a safeguard for community safety, and everyone should participate in this effort.
Was this review help?
18
4
Share
Expand All
OGenesis
10/30/25 6:25am
As an ordinary person who has long been concerned about driving safety, I often remind my friends that fire lanes should be wide enough, at least 4 meters. Fire trucks are large in size, and if the lane is too narrow, they may find themselves in a dilemma, unable to move forward or backward, which could delay firefighting efforts. I remember a small fire in our neighborhood last time, where parked cars narrowed the passage, delaying the rescue team. When we drive, we should avoid parking randomly in fire zones and keep the area clear. Relevant regulations also emphasize that the ground strength must be able to bear the weight, otherwise, the vehicle may get stuck, making the situation worse. Maintaining community lanes is simpler; neighborhood coordination can prevent major issues. In critical moments, a wide lane is a lifeline, so don't overlook this point.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

What Causes the Reversing Light Not to Work?

The reasons why the reversing light does not work are as follows: 1. The fuse is blown, causing the reversing light not to work. 2. The reversing light switch is damaged, causing the reversing light not to work. 3. The reversing light bulb is blown, causing the reversing light not to work. 4. The connecting wire is broken or the connector is loose, causing the reversing light not to work. The solutions for a non-working reversing light are as follows: 1. Check the reversing light switch: The reversing light will only illuminate when the switch is properly engaged. Unplug the reversing light switch connector and bridge the switch with a wire. If the light turns on, it means the switch is damaged. If it doesn't, the switch is fine. 2. Check the power supply to the reversing light: If the fuse is intact and the switch is functioning properly, but the light still doesn't work, measure whether there is power reaching the bulb. Without power in a normal circuit, the electrical device cannot function. 3. Check the ground wire: For an electrical device to work properly, the ground wire is essential. Many technicians overlook the ground wire during routine maintenance, but it plays a crucial role in automotive wiring.
12
1
Share

What is the correct way to use a differential lock?

The usage method of the differential lock is as follows: 1. Differential lock usage: The inter-axle and inter-wheel differentials of the drive axle are controlled by the differential lock switch on the dashboard in the cab; When the vehicle is stuck in muddy or slippery sections, press the differential lock switch at low speed or when stationary, release the accelerator pedal, and steer appropriately. The indicator light will illuminate, indicating that the differential has been correctly engaged. 2. Differential lock deactivation: When road conditions improve (the road becomes better), at low speed or constant speed operation, release the accelerator pedal, press the differential lock switch, and steer appropriately. The indicator light will turn off, indicating that the differential has been disengaged. The function of the differential lock: It locks the planetary gear mechanism of the differential, rendering the differential ineffective. This causes the drive shafts at both ends of the differential to become rigidly connected without any speed difference.
13
5
Share

Why Can't a Manual Transmission Car Shift Gears Suddenly?

Reasons why a manual transmission car cannot shift gears: 1. The clutch disc does not separate clearly; 2. The clutch disc and clutch pressure plate are damaged. Solutions for a manual transmission car that cannot shift gears: 1. Adjust the clutch at a repair shop; 2. Replace the clutch friction disc with a new one. Below is an introduction to the clutch: 1. Definition: Located within the flywheel housing between the engine and the transmission, the clutch assembly is fixed to the rear plane of the flywheel with screws. It is a device that transmits the engine power of a car or other power machinery to the axle in an on-off manner. 2. Function: The driver can press or release the clutch pedal as needed to temporarily separate and gradually engage the engine with the transmission, thereby cutting off or transmitting the engine's power input to the transmission. 3. Location: The clutch is installed between the engine and the transmission and is the assembly component in the car's drivetrain that directly connects with the engine. Typically, the clutch is installed together with the engine crankshaft's flywheel group and serves as the component that cuts off and transmits power between the engine and the car's drivetrain. During the entire process from starting the car to normal driving, the driver can operate the clutch as needed to temporarily separate or gradually engage the engine with the drivetrain, thereby cutting off or transmitting the engine's power output to the drivetrain.
2
1
Share

What Does a Hot Melt Tire Mean?

Hot melt tires refer to tires whose treads melt into a gel-like state due to the heat generated from friction with the road surface during use. Below is relevant information about hot melt tires: 1. Working Principle: Hot melt tires are tires whose surfaces melt or enter a gel state at certain temperatures. After driving for a period, the tire surface can reach 90 degrees Celsius and turn into a gel state, thereby enhancing grip. 2. Suitable Venues: Hot melt tires are essentially slick tires with no drainage grooves or any tread patterns on the surface, allowing for the maximum contact area of the tire. They provide the greatest friction on dry surfaces, enabling the tires to tightly adhere to the ground. Therefore, hot melt tires are mostly used in situations where high grip is required without much consideration for cost, such as in track racing.
8
3
Share

Which Volkswagen models have round air vents?

It should be the Volkswagen Jetta, which is also a unified feature of the Volkswagen family. Introduction to Volkswagen: Volkswagen is an automobile manufacturing company headquartered in Wolfsburg, Germany, and is the core enterprise of the Volkswagen Group, one of the world's four largest automobile manufacturers. Meaning of Volkswagen: Volkswagen (German: VolksWagenwerk) means 'the people's car.' The logo of the brand has undergone several changes throughout history. The current logo features 'VW,' the initials of its full name. The logo appears as if it is composed of three 'V's made with the middle and index fingers, symbolizing the company and its products' determination to win—win—win.
12
3
Share

Does the Honda CR-V have the mirror tilt function?

Honda CR-V does not come equipped with a mirror tilt function. If the owner wants this feature, it can be achieved through aftermarket installation. The purpose of the mirror tilt function: It provides the driver with a ground view when reversing, ensuring driving safety. There are two methods to activate it: one is through the mirror adjustment knob control, and the other is through the central control system settings, which can enable the automatic mirror tilt function when reversing. Additionally, it can also be set by adjusting the memory seats. Advantages of the mirror tilt function: The rearview mirror automatically adjusts to increase visibility when reversing and resets automatically when driving forward, which is a very user-friendly design.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.