What is the wheelbase of the Tharu?

What are the consequences of not replacing the air filter?

The consequences of not replacing the air filter include: 1. Reduced filtration efficiency, allowing fine dust from the air to enter the engine combustion chamber through the intake system, causing severe wear to the engine cylinders; 2. Incomplete combustion of gasoline, leading to increased carbon deposits in the throttle body. The accumulation of carbon deposits inside the engine can result in unstable idling, black smoke from the exhaust pipe, and engine vibration; 3. Excessive accumulation of impurities on the surface of the air filter can easily cause blockages, leading to insufficient air intake for the engine. Functions of the cabin air filter: 1. Providing fresh air; 2. Ensuring safety and hygiene; 3. Absorbing harmful substances; 4. Filtering solid impurities.

19

4

Share

Where is the air conditioning filter located in the Qashqai?

The air conditioning filter in the Qashqai is located near the left foot position of the front passenger seat. The functions of the air conditioning filter include: 1. Providing fresh air; 2. Ensuring safety and hygiene; 3. Absorbing harmful substances; 4. Filtering solid impurities. Taking the 2021 Qashqai as an example, it is a mid-size SUV with the following dimensions: length 4401mm, width 1837mm, height 1593mm, wheelbase 2646mm, fuel tank capacity 57 liters, and curb weight 1444kg. The 2021 Qashqai features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 151 PS, maximum power of 111 kW, and maximum torque of 194 Nm, paired with a 7-speed continuously variable transmission.

6

2

Share

How many points are deducted for the rear of the car going out of line during reverse parking?

If the rear of the car goes out of line during reverse parking, 100 points will be deducted, resulting in failure. Reverse parking is one of the mandatory test items in the Subject 2 (Field Driving Skills Test). The test items for Subject 2 include: reverse parking into left and right bays, parallel parking, curve driving, right-angle turns, and hill start and stop. Common reasons for failing Subject 2 include: 1. Failing to enter the parking bay or running over the boundary line during reverse parking; 2. Poor control of the clutch pedal, leading to excessive speed; 3. Inaccurate stopping during hill start and stop; 4. Stalling the engine due to operational errors during start; 5. Unfamiliarity with the test site, leading to nervousness; 6. Forgetting reference points during curve driving, resulting in running over the line.

13

2

Share

How to Test Automotive LIN Bus?

Automotive LIN bus testing method: Use a multimeter for detection. Select a pin on the bus for measurement, set the multimeter to the 20V voltage range, connect one probe to the pin and the other to the signal ground, then measure the voltage between the two points. LIN (Local Interconnect Network) is a low-cost serial communication protocol designed for distributed electronic systems in vehicles. The LIN bus is a serial communication network specifically defined for automotive distributed electronic systems, serving as a supplement to other automotive multiplex networks like CAN (Controller Area Network). It is suitable for applications that do not require high bandwidth, performance, or fault-tolerant capabilities.

18

4

Share

Where is the 'Tong' license plate from?

Currently, there is no 'Tong' license plate. The first character of a license plate represents the abbreviation of the province where the vehicle is registered, the second is an English letter representing the city-level code of the vehicle's location, followed by a five-digit serial number. The functions of a license plate are: 1. To number and register information for each vehicle; 2. To identify the region to which the vehicle belongs; 3. To trace the owner and registration details of the vehicle based on the license plate. Types of license plates: 1. White represents military and police plates; 2. Blue represents ordinary small vehicles with fewer than 7 seats; 3. Yellow represents ordinary large vehicles; 4. Black represents foreign enterprise plates.

16

5

Share

How to fold down the rear seats of a Chery QQ?

The method to fold down the rear seats of a Chery QQ is: Near the door edges on both sides of the backrest, there are pullable pins used for securing the seats. Pull the pins upward, and the seats can then be folded down. Car seats are the seating used when riding in a vehicle. By location, they can generally be categorized into: 1. Front seats: headrest, backrest, seat cushion, armrest; 2. Rear seats: headrest, backrest, seat cushion, side wings, armrest. Taking the 2013 Chery QQ as an example, its body dimensions are: length 3564mm, width 1620mm, height 1527mm, wheelbase 2340mm, front track 1390mm, rear track 1365mm, fuel tank capacity 35 liters, trunk capacity 190 liters, and curb weight 936kg.

8

3

Share

What is the wheelbase of the Tharu?

What are the consequences of not replacing the air filter?

Where is the air conditioning filter located in the Qashqai?

How many points are deducted for the rear of the car going out of line during reverse parking?

How to Test Automotive LIN Bus?

Where is the 'Tong' license plate from?

How to fold down the rear seats of a Chery QQ?

What type of car is the Little E?

What is the meaning of engine start-stop?

Is the BMW 3 Series available as an imported model?

Where to Connect the Ground Wire in a Car?