What is the wheelbase of the T-Cross?

How to Coordinate the Clutch and Brake for Semi-Engaged Starting?

Semi-engaged starting coordination steps for clutch and brake: Press the brake pedal, slowly release the clutch pedal. When the vehicle shows slight vibration and signs of movement, you can then release the brake pedal and apply the accelerator to start. Clutch semi-engagement refers to the unstable connection state of the clutch, where the driver depresses the clutch pedal, gradually reducing the pressure on the clutch pressure plate, causing the driving plate and driven plate to be in a state of simultaneous rotation and slipping. There are three working states of the clutch: 1. Fully engaged state, where the driving technique involves not depressing the clutch pedal; 2. Disengaged state, where the driving technique involves fully depressing the clutch pedal; 3. Semi-engaged state, where the driving technique involves partially depressing the clutch pedal.

19

1

Share

Can the frame of a truck be welded with electric welding?

The frame of a truck cannot be welded with electric welding. The repair methods for a broken truck frame are as follows: 1. Replace the frame: During the replacement process, ensure it matches your vehicle model. Although the cost of replacement is high, life is priceless. 2. Reset: Perform welding directly at the broken or bent part of the frame, but clean the dirt at the broken part in advance to prevent more serious secondary damage after repair. 3. Excavate and weld: Open a V-shaped groove at the broken part, cut the same size and material from a scrapped frame, and then perform welding.

7

5

Share

How to Set the Auto-Dipping Function for the Reversing Mirror on the 2020 Sagitar?

The method to set the auto-dipping function for the reversing mirror on the 2020 Sagitar: first, activate this function in the vehicle computer settings; second, manually rotate the knob to R, check the option in the central control, then adjust the mirror adjustment knob to R, and the right mirror will automatically dip when reversing. The 2020 Sagitar is equipped with two engines, one is a 1.2-liter turbocharged engine, and the other is a 1.4-liter turbocharged engine. The body dimensions are 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm. The front suspension uses a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.

9

3

Share

How to Open the Tailgate Glass of the Grand Cherokee?

There is a small black dot next to the tailgate logo; pressing it will open the tailgate glass. Below are specific details about the Grand Cherokee: Exterior: The Grand Cherokee's body design tends to pursue curved aesthetics to meet urban traffic and aerodynamic requirements. Features include a steeply raked windshield, a shield-shaped front grille, gem-like headlights, and fog lights integrated into the body, effectively incorporating sedan design principles. Interior: The Grand Cherokee's interior luxury rivals that of premium sedans, with high-tech equipment throughout. The finely textured dashboard and center console, along with high-gloss wood trim, exude a high-end taste.

14

5

Share

Where to Check the Water Temperature Gauge in Toyota Yaris?

Toyota Yaris's water temperature gauge can be viewed on the dashboard, indicated by a thermometer-like symbol. The water temperature gauge is used to display the temperature of the engine coolant. The coolant temperature signal is provided by the engine coolant temperature sensor installed on the engine cylinder head. During normal engine operation, the displayed value should range between 80 and 100 degrees Celsius. The Toyota Yaris is a compact car under the Toyota brand, featuring a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. In terms of dimensions, the car measures 4440mm in length, 1700mm in width, and 1490mm in height, with a wheelbase of 2550mm. It is powered by NR series 1.3L and 1.5L engines.

15

2

Share

Do You Need to Press the Clutch for Both Upshifting and Downshifting?

Manual transmission vehicles require pressing the clutch for both upshifting and downshifting. The clutch is installed within the flywheel housing between the engine and the transmission, with the clutch assembly secured to the rear plane of the flywheel using screws. The output shaft of the clutch serves as the input shaft of the transmission. Below is an introduction to clutch-related components: Structure: The clutch consists of five main components: the clutch pressure plate, clutch disc, release bearing, release fork, and either the clutch cable or clutch slave cylinder. Function: The clutch enables a gradual connection between the engine and the transmission, ensuring smooth vehicle starts. It temporarily disconnects the engine from the transmission to facilitate gear changes and reduce shifting impact. During emergency braking, the clutch separates to prevent overload in the transmission and other drivetrain components, providing protective benefits.

15

1

Share

What is the wheelbase of the T-Cross?

How to Coordinate the Clutch and Brake for Semi-Engaged Starting?

Can the frame of a truck be welded with electric welding?

How to Set the Auto-Dipping Function for the Reversing Mirror on the 2020 Sagitar?

How to Open the Tailgate Glass of the Grand Cherokee?

Where to Check the Water Temperature Gauge in Toyota Yaris?

Do You Need to Press the Clutch for Both Upshifting and Downshifting?

What does it mean when the parking brake is in the braking state?

What is the difference between Golf National 5 and National 6?

How to Identify China 5 and China 6 Vehicles?

What are the consequences of not changing engine oil?