What is the wheelbase of the standard Mercedes-Benz E-Class?

1 Answers
SawyerLynn
07/29/25 8:58pm
The wheelbase of the standard Mercedes-Benz E-Class is 2939mm, with a length of 4947mm, width of 1852mm, and height of 1467mm. The Mercedes-Benz E-Class uses a multi-link independent suspension for both the front and rear, which enhances driving dynamics and ride comfort. The imported version of the Mercedes-Benz E-Class is equipped with three engines: a 1.5-liter turbocharged engine, a low-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine delivers 184 horsepower and a maximum torque of 280 Nm; the low-power 2.0-liter turbocharged engine produces 258 horsepower and a maximum torque of 370 Nm; the high-power 2.0-liter turbocharged engine generates 299 horsepower and a maximum torque of 400 Nm.
Was this review help?
19
0
Share
More Forum Discussions

What gear should an Audi use on the highway?

For automatic transmission models, using the D gear is sufficient. For manual transmission, change gears normally according to road conditions; generally, shifting to 6th gear is adequate. Audi was founded in 1899 by August Horch as A. Horch & Cie. Due to disagreements with his partners, Horch later established another company named August Horch Automobilwerke GmbH. However, he was sued for the similarity in company names, so he adopted the Latin translation of 'Horch' (meaning 'listen' in German) as the company name, hence 'Audi'. The four-ring logo of Audi originates from the four companies that merged in the early days (in Mainland China, Audi cars are thus jokingly called 'Tetracycline'). In 1932, four German automakers—Audi, DKW, Horch, and Wanderer—merged to form 'Auto Union.' They commissioned Ferdinand Porsche to design the Auto Union V16 racing car (also known as the Silver Arrow), which led their team to secure Germany's representation from the Mercedes team and subsequently dominate the European racing scene.
9
5
Share

Will Cigarettes Go Bad If Left in the Car During Summer?

Leaving cigarettes in the car during summer can cause them to deteriorate. While cigarettes exposed to high temperatures in the car may still be smokable, prolonged storage under such conditions can degrade their original quality. During summer, the temperature inside a car can become extremely high, potentially exceeding 50°C under direct sunlight. Cigarettes, however, should ideally be stored in a cool, dry place. They contain a certain amount of moisture, and prolonged exposure to heat can completely evaporate this moisture, leading to an altered and unpleasant taste. Methods to preserve cigarettes in hot weather: In high temperatures, cigarettes are highly susceptible to changes in environmental conditions, which can affect their taste. They should not be stored for long periods in airtight plastic bags. Instead, they should be kept in a well-ventilated, cool, and dry place. It's advisable to use them promptly to avoid prolonged storage, which can lead to spoilage and changes in flavor. Spoilage and flavor changes: Cigarettes are sensitive to high temperatures when left in a car, and their shelf life depends heavily on storage conditions. They are prone to changes due to environmental and temperature variations. Extended storage in hot weather can easily cause them to spoil or develop an off taste.
18
4
Share

What happens if you press the accelerator hard in first gear?

It will damage the engine and consume more fuel. First gear is rarely used while driving because the speed is very slow, while the engine speed is very high. Prolonged use can harm the engine. Gear shifting essentials: 1. When shifting gears, apply gentle and smooth force, avoiding abrupt movements. It doesn't need to be too fast; 1-2 seconds is ideal. Follow the essentials, with clear movements and full range of motion. When reaching the position, apply slightly heavier force (i.e., subtle force) to ensure the gear is engaged. 2. Keep the five fingers together and loosely grip the gear knob. Use the forearm to drive the hand for shifting. For small cars, first and second gears are on the left side of neutral, third and fourth gears are slightly to the right of neutral, and fifth gear is at the top right corner. When shifting up, use the lower part of the palm. When shifting down, use the four fingers (excluding the thumb) of the right hand, which is particularly labor-saving. Additionally, when disengaging gears, avoid excessive force to prevent accidentally shifting into another gear. A slight force is sufficient when engaging gears.
18
3
Share

How often should the Odyssey fuel filter be replaced?

It is recommended to replace the fuel filter every 20,000 kilometers, depending on the driving conditions and fuel quality. For externally mounted fuel filters, the general recommendation is to replace them every 20,000 to 30,000 kilometers. According to 4S dealership standards, fuel filters are typically replaced every 10,000 kilometers, but filters used for 10,000 kilometers are often not very dirty, making replacement somewhat wasteful. Symptoms of a dirty fuel filter Reduced engine efficiency, increased carbon buildup, damage to cylinders and surrounding components, poor fuel supply, insufficient vehicle power, or even stalling. A dirty fuel filter increases the likelihood of impurities entering the engine. If impurities are not filtered, over time, the fuel lines and fuel injection system can also become corroded and damaged. The fuel filter is connected to the fuel pump. If there are too many impurities in the fuel, they can clog the fuel injectors, leading to poor fuel supply. A clogged fuel filter can affect the fuel intake volume, and insufficient intake can make the engine difficult to start.
5
4
Share

What is the fuel tank capacity of the City in liters?

The fuel tank capacity of the City is 40 liters, which is the officially announced data. The recommended fuel grade for the City is 92 octane, with a fuel consumption of 5.4-5.6L per 100 kilometers. A full tank can cover a distance of 714-740 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. The fuel level is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel might exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is the volume from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow the fuel to expand when the temperature rises without overflowing the tank. If the fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
10
3
Share

Are the Engines of the Envision and Envision S the Same?

The engines used in the Envision and Envision S are different. The Envision S is equipped with the new LSY engine from General Motors. The Envision comes with two engine options: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 2.0-liter turbocharged engine in the Envision has the model code LTG. The 2.0-liter turbocharged engine in the Envision S delivers 237 horsepower and a maximum torque of 350 Nm. This engine reaches its maximum power at 5,000 rpm and its maximum torque between 1,500 and 4,000 rpm. It features variable cylinder technology and direct fuel injection, with an aluminum cylinder head and block. This engine is paired with a 9-speed automatic transmission (9AT). The 2.0-liter turbocharged engine in the Envision produces 260 horsepower and a maximum torque of 400 Nm. It achieves its maximum power at 5,500 rpm and its maximum torque between 3,000 and 4,000 rpm. This engine also features direct fuel injection and an aluminum cylinder head and block. This engine is paired with a 9-speed automatic transmission (9AT). The use of a 9AT improves gear shift smoothness and fuel efficiency.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.