What is the wheelbase of the Passat?

What is the upgrade method for the Roewe i5 system?

The upgrade method for the Roewe i5 system is: connect the mobile device to the vehicle, download the system data package from the mobile device, and then proceed with the upgrade. Taking the 2020 Roewe i5 as an example, it belongs to the compact car category, with body dimensions of: length 4601mm, width 1818mm, height 1489mm, wheelbase 2680mm, fuel tank capacity 45l, and curb weight 1185kg. The 2020 Roewe i5 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5l naturally aspirated engine, delivering a maximum horsepower of 120ps, maximum power of 88kw, and maximum torque of 150nm, paired with a 5-speed manual transmission.

20

5

Share

How to Operate the Highlander Automatic Transmission?

Press the brake pedal, shift the gear lever down to D (Drive), then push the lever to the right to enter manual mode. At this point, you can use the paddle shifters to manually shift gears. The '+' paddle represents upshifting, while the '-' paddle represents downshifting. When going uphill, use D- to downshift for greater torque and more powerful output. If the power is insufficient, you can switch to S (Sport) mode. When going downhill, shift up to D2 or D3 using D+ to utilize engine braking for better control.

9

5

Share

What is the replacement interval for full synthetic engine oil?

Full synthetic engine oil should be replaced approximately every 10,000 kilometers or once a year. Full synthetic oil demonstrates excellent performance with strong oxidation resistance, allowing for a longer service interval. The functions of engine oil are: 1. To reduce friction and high temperatures; 2. To minimize gas leakage and prevent contamination from external pollutants; 3. To protect components from contact with water, air, and harmful acidic gases; 4. To cushion the pressure rise in engine cylinder ports; 5. To flush away contaminants generated on component surfaces. The steps for changing engine oil are: 1. Lift the vehicle, remove the underbody shield, and place a container with approximately 10-liter capacity beneath the drain plug; 2. Loosen the drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the drain plug after complete drainage and wipe it with a paper towel to check for leaks; 3. Reinstall the underbody shield and lower the vehicle, then use a funnel to add new oil through the filler port.

10

3

Share

How to Turn on the BYD Windshield Wiper?

The BYD Qin's windshield wiper and washer switch are integrated into the combination control switch located behind the right side of the steering wheel. The wipers and washers only operate when the ignition switch is turned on. The control lever is used to operate the windshield wipers and washers. To select a gear position, simply lift or press the control lever. In intermittent mode, you can rotate the knob at the end of the wiper switch to adjust the wiper interval time to 1s, 3s, 5s, or 7s. To operate the wiper in single swipe mode, lift the control lever from the OFF position, and the wiper will perform a high-speed swipe.

19

5

Share

How to Turn Off the Horn Sound When Locking the Jiangling Yuhu 7?

Press and hold the light combination switch button until the menu appears, then navigate to the security settings and select the sound prompt settings to configure the audible and visual signals for locking and unlocking. There is a button on the car key remote with a speaker symbol crossed out. Pressing this button will enable silent locking, meaning no alarm sound will be heard after locking the car. You can also visit a 4S shop and ask a technician to connect to the vehicle's computer system to disable the locking sound. This method is more professional. With the vehicle's power on, simultaneously press and hold the lock and unlock buttons for 3 seconds to achieve the effect of turning off the locking sound.

7

0

Share

How to Clean a Dirty Gas Tank?

Open the fuel tank drain valve and drain all the remaining fuel. Then, close both the drain valve and the fuel supply valve. Remove the fuel tank cap, fuel filter screen, and dipstick. Connect the air pump hose to the spray pipe and insert it deep into the bottom of the fuel tank. Use high-speed airflow to flush the bottom oil layer of the tank, thoroughly cleaning the interior. Close the air reservoir valve, remove the spray pipe, and drain all the cleaning oil from the tank. Add another 15-30L of clean fuel and repeat the cleaning process as described above. After cleaning is complete, drain the cleaning fuel and reinstall the fuel filter screen, dipstick, and fuel tank cap. This completes the fuel tank cleaning process.

8

2

Share

What is the wheelbase of the Passat?

What is the upgrade method for the Roewe i5 system?

How to Operate the Highlander Automatic Transmission?

What is the replacement interval for full synthetic engine oil?

How to Turn on the BYD Windshield Wiper?

How to Turn Off the Horn Sound When Locking the Jiangling Yuhu 7?

How to Clean a Dirty Gas Tank?

How much engine oil should be added to a Volvo S60L?

Where is the turbocharger located?

Does the Tucson have anti-collision beams?

How to Remove Long-Sticking Car Decal Adhesive?