What is the wheelbase of the new Santana?

How to Remove Corolla Seats?

Corolla seats can be removed as follows: First, remove the headrest to facilitate lowering the rear seat cushion. Locate the clips behind the seat and pull firmly to detach the cushion. Seat removal is generally used when large items need to be placed in the car. The rear seats can usually be folded down in a split or full configuration. Information about car seats is as follows: 1. Currently, seats are basically divided into two types: leather seats and fabric seats. There are also child seats, racing seats, etc. 2. Car seat cleaning: First, the owner should use a brush to clean the dirtier areas, then use a clean cloth dipped in a small amount of neutral detergent to wipe the entire seat surface while it is half-dry and half-wet. Finally, use a vacuum cleaner to clean the seats again and remove excess moisture.

7

1

Share

What is the range of the Sylphy electric vehicle?

The official electric range of the Sylphy is 338 km, with an energy consumption of 13.8 kWh/100km and a battery capacity of 38 kWh. Here is some additional information about the Sylphy electric: 1. The Sylphy electric is equipped with a permanent magnet synchronous drive motor model TZ200XS5UR, with a maximum power of 80kW (109PS) and a peak torque of 254N·m. In terms of the battery, the new vehicle is equipped with a thin-film high-efficiency ternary lithium battery pack with a total capacity of 38kW·h, and supports two charging methods: 50kW DC fast charging and 6.6kW AC slow charging. 2. Essentially, the Sylphy electric is a Leaf, a pure electric technology that has gained a good reputation abroad, paired with a more competitive sedan version in the domestic market. The Sylphy electric also performs well in terms of seat comfort.

8

2

Share

How to Replace the Remote Battery for Fit?

The method for replacing the remote battery of Fit is as follows: 1. Press the button on the electronic key to eject the mechanical key. 2. There is a notch where the mechanical key is covered, insert a coin into the notch. 3. Turn the coin clockwise, and the electronic key will separate into the electronic board and the power supply part. 4. After seeing the battery, remove the old battery by hand and replace it with a new one. Precautions when replacing the battery for Fit key are as follows: 1. Before prying open the key, take measures to prevent small parts from falling and getting damaged. 2. The battery model must be the same as the original battery model. 3. Before removing the battery, clearly identify and remember the installation polarity to ensure that the positive and negative poles are installed the same as the original battery. 4. After reassembling the electronic key, make sure the buckle is restored to its original position and the mechanical key is locked in place.

12

2

Share

How to Replace the Battery in an Older Mercedes-Benz SLC260 Key?

Steps to replace the battery in an older Mercedes-Benz SLC260 key are as follows: 1. Insert the mechanical key into the side slot of the key fob, press the internal gray button, and with the other hand, push the rear end of the key upward. When a gap appears, you can remove the mechanical key. 2. Then, manually remove the rear end to replace the battery. After installing the new battery, reinsert the key bracket, completing the battery replacement. Below is additional information about remote keys: 1. How remote keys work: The key emits a weak radio wave, which is received by the car's antenna. The electronic control unit (ECU) identifies the signal code, and the system's actuator (motor or electromagnetic coil) performs the locking/unlocking action. 2. If the remote key gets wet, do not shake it vigorously or press any buttons, as this can cause water to seep into other critical circuits. Also, avoid using the remote to unlock the car immediately, as it may damage the circuit board. The correct approach is to open the key casing, lay it flat, and dry it with a hair dryer before further inspection.

14

2

Share

What Causes Engine Abnormal Noise in Chevrolet Cruze?

Chevrolet Cruze engine abnormal noise causes: 1. Excessive clearance: Clearance is an important indicator of automotive assembly quality. When lubrication, temperature, load, and speed are constant, abnormal noise becomes more pronounced as clearance increases. Natural wear of certain engine moving parts may cause clearance to exceed tolerance limits, resulting in noise. 2. Poor lubrication: Lubrication is essential for proper engine operation. The lubrication system provides cooling, cleaning, sealing, and rust prevention. With fixed clearance, temperature, load, and speed, oil film thickness depends on lubrication system pressure and oil quality. High-quality lubricants with appropriate pressure create better oil films - thicker films reduce mechanical impact and minimize abnormal noise. 3. Loose fasteners: Engine vibration during operation may cause component loosening, leading to impact noises.

20

5

Share

What are the dimensions of the Magotan's body?

The body dimensions of the Magotan are 4866mm in length, 1832mm in width, and 1464mm in height, according to official data. The length of the Magotan refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The Magotan offers multiple powertrain options, including 2.0T, 1.4T, and hybrid variants. The 2.0T version is equipped with an inline 4-cylinder turbocharged engine, delivering a maximum power of 162kW and a combined torque of 350Nm. The 1.4T version features a classic inline 4-cylinder turbocharged engine, producing a maximum horsepower of 150PS and a combined torque of 250Nm, paired with a 7-speed dual-clutch transmission. There are national regulations regarding vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data is to ensure adequate space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.

16

0

Share

What is the wheelbase of the new Santana?

How to Remove Corolla Seats?

What is the range of the Sylphy electric vehicle?

How to Replace the Remote Battery for Fit?

How to Replace the Battery in an Older Mercedes-Benz SLC260 Key?

What Causes Engine Abnormal Noise in Chevrolet Cruze?

What are the dimensions of the Magotan's body?

What type of engine oil is used in the Honda Lingpai?

How to Replace the Key Battery for the New Mercedes-Benz SLK260?

What are the differences between the 2.5V and 2.5S engines of the Toyota Reiz?

What do F and E on the fuel gauge represent?