What is the wheelbase of the Jetta VS7?

1 Answers
MacChristopher
07/30/25 12:40am
The wheelbase of the Jetta VS7 is 2730 mm, and its body dimensions are 4624 mm in length, 1841 mm in width, and 1644 mm in height. The Jetta VS7 is a model built on Volkswagen's platform and also uses Volkswagen's engines. The Jetta VS7 comes standard with features such as an openable panoramic sunroof, electronic parking brake, auto hold system, wireless charging, LED automatic headlights, car connectivity, pre-collision safety system, and ACC adaptive cruise control. In terms of power, the Jetta VS7 is equipped with a 1.4T + 7-speed DSG and a 2.0T + 7-speed DSG powertrain. The front suspension uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
Was this review help?
19
1
Share
More Forum Discussions

What are the symbols for external and internal air circulation in car air conditioning?

The internal circulation symbol is a circular arrow inside a car graphic; the external circulation symbol is an arrow pointing from outside the car into the car. Below is some introduction about internal and external circulation: 1. Internal circulation: The purpose of internal circulation is to prevent dust and odors from being drawn into the car through external circulation, so a control system is set up to close the external circulation air duct and block polluted air from outside the car. 2. External circulation: Since the interior of the car forms a relatively sealed environment, people can easily suffer from oxygen deprivation if they stay in this environment for a long time. Therefore, the air conditioning system adds an air duct to draw in fresh air from outside the car, which then passes through the air conditioning evaporator or heater core to blow out cold or warm air respectively.
15
2
Share

The Hazards of Coasting in Neutral on a Downhill Slope?

Coasting in neutral on a downhill slope can damage the transmission. The specific impacts are as follows: 1. Inability to supply oil normally: When an automatic transmission vehicle is shifted into neutral (N) while driving, the oil pump in the automatic transmission will not be able to supply oil normally for lubrication, causing the internal components of the transmission to heat up and leading to complete damage. 2. Increased fuel consumption: Coasting in neutral does not save fuel; sometimes it even consumes more. This is mainly related to the working mode of electronic fuel injection engines. Electronic fuel injection engines can determine the amount of fuel injection based on the computer program. If coasting in neutral is selected, the computer will put the vehicle into idle mode, and the engine will still inject fuel.
19
5
Share

What to Do About Severe Rear Tire Wear on the Outlander?

The severe wear on the rear tires of the Outlander is caused by excessive rear wheel camber deviation, which can be corrected through precise four-wheel alignment. Some models with independent rear suspension do not come equipped with factory-installed eccentric bolts for adjusting camber, requiring separate purchase during four-wheel alignment. Here are the main causes of tire wear: 1. Early wear on the central part (tread) of the tire: Overinflation. Properly increasing tire pressure can reduce rolling resistance and save fuel. 2. Excessive wear on both sides (shoulders) of the tire: Underinflation or prolonged overloading. Low pressure or heavy loads increase the tire's contact area with the ground, causing both sides to engage and wear prematurely. 3. Excessive wear on one side of the tire: Incorrect front wheel alignment. When the front wheel camber is too large, the outer edge wears prematurely; when it's too small or absent, the inner edge wears prematurely. 4. Severe abnormal wear on the inner side of the left rear tire and the outer side of the right rear tire: Non-parallel front and rear axles, with the right wheelbase exceeding the left beyond standard, or vice versa.
17
2
Share

What is the maintenance interval for the Mazda 6?

The maintenance interval for the Mazda 6 is every 5,000 kilometers or three months. There are two indicators for car maintenance: one is the time indicator, and the other is the mileage indicator, whichever comes first. Below are the details about car maintenance: 1. Minor Maintenance: Minor maintenance mainly involves changing the engine oil and oil filter. Engine oil, also known as engine lubricant, is referred to as the 'blood' of the engine. Its primary functions include lubrication, shock absorption, and buffering for the engine. Engine oil can be categorized into mineral oil, semi-synthetic oil, and fully synthetic oil, each with different effects and usage intervals. 2. Major Maintenance: Major maintenance involves a comprehensive inspection of the car and replacing the 'five oils, four filters, and three fluids.' The five oils include engine oil, power steering fluid, transmission fluid, clutch fluid, and brake fluid. The four filters are the air filter, oil filter, fuel filter, and cabin air filter. The three fluids are coolant, battery fluid, and windshield washer fluid.
5
3
Share

How to Cancel Cruise Control on Volkswagen Polo?

There are three methods to cancel the current cruise control speed: press the brake pedal; press the cancel button; or press the OFF button. This will deactivate the current cruise control. Below are precautions for using cruise control: 1. Rainy and snowy weather: Road surfaces are slippery, and road conditions change significantly, making cruise control unsuitable. Other complex road conditions are also not ideal for cruise control; it can be turned off or canceled in advance. 2. During normal cornering: Additional throttle is often needed to provide greater steering force. However, in cruise control mode, the vehicle automatically maintains a constant speed, with the throttle controlled by the onboard computer, which can pose risks during cornering. In such situations, cruise control is also not recommended.
8
1
Share

How many seats can a Class C driver's license drive?

C driver's license can drive vehicles with up to 9 seats. Among Class C driver's licenses, C1 is the highest level, allowing the driver to operate small passenger vehicles with up to 9 seats. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" regarding the permitted vehicle types: The highest permitted vehicle type for a C1 driver's license is small and micro passenger cars, as well as light and micro trucks; light and micro special operation vehicles. Additional information: 1. Class C driver's licenses can be divided into: C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), C5 (small automatic transmission passenger cars for disabled people). 2. Small passenger cars generally refer to small vehicles carrying people, specifically small buses with a capacity of 2-9 people, usually including sports cars, sedans, and micro vans. Due to their compact size, these vehicles are very suitable for family and organizational use. They are generally distinguished from medium and large buses. The advantages of micro vehicles are their affordable price, convenient maintenance, and lower fuel consumption.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.