What is the wheelbase of the Honda CR-V?

What is the function of Skoda Octavia sensors?

The functions of Skoda Octavia sensors are as follows: 1. Intake pressure sensor: Reflects changes in the absolute pressure within the intake manifold and provides the ECU (Engine Control Unit) with a reference signal for calculating fuel injection duration. 2. Throttle position sensor: Measures the opening angle of the throttle and provides the ECU with a reference signal for fuel cutoff, fuel/air ratio control, and ignition timing correction. 3. Intake temperature sensor: Detects the intake air temperature and provides the ECU with data for calculating air density. Coolant temperature sensor: Detects the coolant temperature and provides the ECU with engine temperature information. 4. Crankshaft position sensor: Detects the crankshaft and engine speed, providing the ECU with a reference signal for determining ignition timing and firing order. 5. Oxygen sensor: Detects the oxygen concentration in the exhaust and provides the ECU with a reference signal for maintaining the fuel/air ratio near the optimal (theoretical) value. 6. Knock sensor: Installed on the engine block to specifically detect engine knocking conditions, providing the ECU with a signal to adjust the ignition timing accordingly.

1

Share

Is Direct Injection Better or Multi-Point Injection Better?

Multi-point injection has obvious advantages over carburetor models, while direct injection is a new technology that outperforms electronic injection in all aspects except for higher production costs and more complex processes. Below is a detailed introduction to both: 1. Electronic Injection: The electronic injection system in car engines generally consists of three main components: the fuel injection circuit, sensor group, and electronic control unit. If the injector is installed in the original carburetor position, meaning there is only one fuel injection point for the entire engine, this is called single-point injection. If injectors are installed on the intake pipe of each cylinder, meaning fuel is injected into the cylinders from multiple locations (at least one injection point per cylinder), this is called multi-point injection. 2. Direct Injection: The injector is placed inside the cylinder, where fuel is atomized and sprayed into the cylinder under high pressure, mixing with air for ignition. This enables lean combustion within the cylinder, thereby improving engine efficiency. It also offers excellent fuel economy and lower exhaust emissions. Additionally, direct injection technology allows for higher compression ratios, significantly increasing power output in engines of the same displacement.

10

5

Share

Can Incorrect Wheel Alignment Cause Abnormal Noises?

Incorrect wheel alignment may cause some abnormal noises, but in most cases, it does not. All four wheels of a car have wheel alignment data, and the wheels are not perpendicular to the ground. The front wheels have parameters such as toe and camber, while the rear wheels also have camber. If the wheel alignment is incorrect, it can lead to uneven tire wear, which affects the tire's lifespan. Here are some relevant details about replacing new tires: 1. If the four new tires are replaced due to severe abnormal wear on the old tires, this can affect the wheel alignment data, so a wheel alignment is necessary. 2. The main parameters adjusted during wheel alignment include caster, kingpin inclination, camber, and toe. Adjusting caster mainly maintains straight-line stability and steering return; adjusting kingpin inclination also maintains stability and steering return; adjusting camber increases the tire's contact area to counteract adverse effects; adjusting toe compensates for the adverse effects caused by camber or toe-in.

10

0

Share

Which gear should an automatic transmission car use when going up and down long slopes?

The correct practice for an automatic transmission car going down a long slope is to shift from D gear to a low gear. Some automatic transmissions have an L gear, which stands for Low gear, designed for safety considerations. When descending a long slope, the L gear can utilize the engine's resistance to control the vehicle's speed, reducing the frequency of using the car's brakes and preventing the danger caused by brake fade due to frequent braking. Below are specific details about automatic transmission cars going downhill: 1. If encountering a short slope, you can simply stay in D gear and apply the brakes to pass. However, for long and steep slopes, keeping the automatic transmission in D gear and continuously applying the brakes can easily cause the brake discs to overheat, reducing braking performance and significantly diminishing the braking effect. Therefore, it's best to avoid this practice. 2. Nowadays, many models come with an M gear, which stands for Manual mode. By switching to manual mode and then shifting to 1st or 2nd gear, you can utilize the engine's low-gear braking effect, combined with intermittent braking, to control the vehicle's speed.

18

1

Share

Why is the CVT transmission so smooth?

Because the CVT transmission is a continuously variable transmission, this type of transmission does not have fixed gears. The process of changing speed and torque is continuous, so there is no jerking, making it very smooth. Here is a detailed introduction to the CVT transmission: 1. The structure of the CVT transmission is very simple. It consists of two cone-shaped pulleys and a steel belt inside. The steel belt can move on the pulleys, allowing the transmission to vary speed and torque. Conventional transmissions have different gear sets, and the gear ratio span in these transmissions is larger than that of a CVT, resulting in jerking after gear shifts. 2. Conventional transmissions are like climbing stairs, where each step represents a gear. Transmissions with more gears have smaller step heights, reducing jerking. Transmissions with fewer gears have higher step heights, leading to more noticeable jerking during shifts. In contrast, the CVT transmission replaces the stairs with a smooth ramp, which has no steps, giving the CVT excellent smoothness.

9

4

Share

What is the engine cylinder pressure?

Automobile engine cylinder pressure is around 1000kpa. Generally, gasoline engines are around 1000kpa, diesel engines are around 2000kpa, most fuel injection engine cylinder pressures are between 1200~1400kPa, and a few high compression ratio engines have cylinder pressures above 1700kPa. A cylinder is a piston in the automobile combustion chamber that is driven by the pressure or expansion force of the working fluid. The classification of cylinders is as follows: 1. Single-acting cylinder: Only one end has a piston rod, and air is supplied from one side of the piston to generate air pressure, which pushes the piston to produce thrust for extension, and returns by spring or self-weight. 2. Double-acting cylinder: Air is alternately supplied from both sides of the piston, and force is output in one or two directions. 3. Diaphragm cylinder: A diaphragm is used instead of a piston, and force is output in only one direction, with spring reset. It has good sealing performance but a short stroke.

10

1

Share

What is the wheelbase of the Honda CR-V?

What is the function of Skoda Octavia sensors?

Is Direct Injection Better or Multi-Point Injection Better?

Can Incorrect Wheel Alignment Cause Abnormal Noises?

Which gear should an automatic transmission car use when going up and down long slopes?

Why is the CVT transmission so smooth?

What is the engine cylinder pressure?

Is it better to change tires at a 4S shop or outside?

What Are the Common Knowledge About Car Waxing?

Why is Honda's car paint so thin?

Why is the fuel consumption of Buick Excelle XT so high?