What is the wheelbase of the Excelle?

What are the reasons for the Buick GL8 shaking during acceleration?

Buick GL8 shaking during acceleration can be attributed to the following reasons: 1. Poor ignition: After driving a certain mileage, the ignition capability of the spark plugs decreases. During acceleration, weak spark plug firing can lead to poor combustion and shaking. 2. Insufficient fuel pressure: Use a fuel pressure gauge to check the gasoline pressure. Observe whether the fuel pressure keeps up during rapid acceleration. If not, inspect the fuel pump and fuel filter. 3. Poor fuel injection: Check whether the fuel injectors are spraying fuel properly and whether there is poor atomization or insufficient fuel injection. If so, clean the fuel injectors. If the problem persists after cleaning, replace them. 4. Incorrect ignition timing: Ignition timing controls the firing moment of the spark plugs. Use a computer to check whether the signals from the camshaft position sensor and crankshaft position sensor are normal, as well as whether the ignition timing is correct.

18

4

Share

How many points are deducted for not fully releasing the handbrake in Subject 2?

Not fully releasing the handbrake in Subject 2 results in a deduction of 10 points. Below is the relevant information: 1. Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It refers to the field driving skills test, with the C1 and C2 license tests including five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. 2. Regulations: According to the 'Content and Methods of Motor Vehicle Driver Tests,' during the Subject 2 test, causing the engine to stall once due to improper operation results in a deduction of 10 points. Drivers should control the clutch properly and make full use of the handbrake function to start smoothly and avoid stalling.

15

0

Share

What does the yellow exclamation mark on the Wildlander dashboard indicate?

When a yellow exclamation mark appears on the car dashboard, it can indicate one of four possible issues: general faults, automatic transmission failure, abnormal tire pressure, or lighting system malfunction. Below is a detailed analysis of these four scenarios: General Faults: A triangle with an exclamation mark inside indicates a malfunction in the vehicle's general performance or components. Common causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor issues. It is recommended to visit a 4S shop for diagnosis and repair to identify the source of the problem. Automatic Transmission Failure: A yellow gear with an exclamation mark inside is the automatic transmission warning light, signaling a transmission fault or low transmission fluid level. Immediate replacement of transmission fluid is required. Abnormal Tire Pressure: An exclamation mark inside a horizontal line under a parenthesis represents the tire pressure monitoring warning light. This light illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting System Malfunction: A yellow bulb with an exclamation mark indicates a lighting system fault. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, or interior lights to identify the issue. Additionally, a red exclamation mark inside a circle with parentheses indicates a brake system warning, which could be due to brake system failure or low brake fluid level. Immediate inspection and repair of the brake system are necessary to prevent accidents.

2

0

Share

If there's no notification within 3 days after running a red light, does it mean there's no issue?

No, after running a red light, the notification message for illegal photo capture usually arrives within 3 to 7 days, and at the latest, within about 13 days. However, some cities now offer "instant electronic police capture alerts," where you can receive a text message notification within 5-10 minutes of being captured. But this notification does not equate to a traffic violation; it merely serves as a capture alert. The final determination of whether it constitutes a violation takes 3-7 days. If it is indeed a violation, you will receive another text message notification. For traffic violations captured by surveillance cameras, vehicle owners generally do not receive the violation notification immediately. There is a delay, and the duration of this delay can vary. After an electronic camera captures a violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center, where it is compiled and then forwarded to the relevant traffic police personnel for verification. Once the violation is confirmed, the system automatically retrieves the vehicle owner's phone number based on the license plate information and sends the violation details via text message. Only then will the vehicle owner receive the corresponding violation notification. After receiving the violation notification, the vehicle owner must go to the local traffic police department where the violation occurred to address the issue within one month before the vehicle's annual inspection. Generally, if a vehicle owner suspects they have committed a violation, they can use 15 days as a benchmark. If no violation notification is received within 15 days, it is likely that no violation was recorded. Methods for querying traffic violations: Traffic violation queries refer to checking motor vehicle violations of traffic regulations via the internet or query terminals. Methods for querying vehicle violations include online vehicle violation websites, phone queries, text message queries, mobile app queries, and offline terminal queries. Online query: You can search for "vehicle violation query" and input your vehicle information to check. Phone query: To inquire about violations, you can call the local 114 (area code + 114) or 12580 for confirmation. Violations can only be processed at the traffic police department where the violation occurred or where the vehicle's license plate was issued. For on-the-spot violations, such as those directly caught by a traffic officer, they must be handled at the location of the violation. Text message query: Open your phone's text message interface; enter "WZ" followed by your license plate number and color in the message body; input 1062650001 as the recipient and click send. Mobile app query: Open the Traffic Management 12123 app, click "More," select "Violation Query," and find any unprocessed violations to resolve them. Offline terminal query: You can visit the local traffic management office and use the self-service query machine to input your license plate number and check recent violation records.

19

1

Share

Does Crossing the White Line and Then Noticing a Red Light Count as Running a Red Light?

If a vehicle's front wheels have just crossed the stop line when the light turns red, and the vehicle stops immediately without moving further, it will not be considered as running a red light. According to Article 2 of the 'Scoring Standards for Road Traffic Safety Violations,' continuing to proceed in violation of the rules constitutes running a red light, which results in a deduction of 6 points. If the vehicle completes crossing the line and continues to move until it is fully past the line before stopping, thereby affecting the passage of other vehicles and pedestrians, it will be penalized as stopping beyond the line. Crossing the stop line can be divided into two scenarios: the front wheels crossing the stop line, or the entire vehicle crossing the stop line. The 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China' Article 38 states: Motor vehicle signal lights and non-motor vehicle signal lights indicate: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. When the red light is on, right-turning vehicles may proceed if they do not obstruct the passage of other vehicles or pedestrians. At intersections without non-motor vehicle signal lights or pedestrian crossing signal lights, non-motor vehicles and pedestrians should follow the motor vehicle signal lights. The new traffic regulations clearly stipulate that running a red light requires the following three necessary conditions: The vehicle illegally crosses the stop line. The vehicle illegally enters the intersection. The vehicle illegally crosses the opposite stop line. Electronic police (traffic cameras) capture three complete video images to constitute running a red light: an image of the vehicle at the moment of violation, an image identifying the vehicle's license plate, and a panoramic image. There are three scenarios regarding whether a vehicle is running a red light while driving: If the vehicle's front wheels cross the stop line or both front and rear wheels cross the stop line but the rear of the vehicle has not yet crossed, and the vehicle stops immediately, traffic police will not penalize it as running a red light, but may penalize it for improper stopping, deducting 2 points. If the vehicle's front wheels cross the stop line, regardless of whether the entire vehicle has fully crossed, and the vehicle stops and then reverses, being captured by traffic cameras with two complete moving images, it will be treated as running a red light, resulting in a 6-point deduction and a fine. If the entire vehicle fully crosses the stop line and stops or continues forward, and within one red light cycle, the traffic cameras capture the three complete images constituting running a red light, regardless of whether the vehicle proceeds to the intersection or crosses the opposite stop line, it will be penalized as running a red light, resulting in a 6-point deduction and a fine. Article 2 of the 'Scoring Standards for Road Traffic Safety Violations' states: Driving a motor vehicle in violation of traffic signal lights results in a deduction of 6 points. However, not all situations will lead to a 6-point deduction. For example, violations such as making a left turn from a straight lane will still be penalized under the 'Road Traffic Safety Law' as violating a prohibitory sign, resulting in a 3-point deduction. Additionally, running a red light recorded by cameras will only incur a fine without point deduction.

18

4

Share

What are the differences between the BRZ and the 86?

The Subaru BRZ and Toyota 86 differ in appearance, rear suspension, chassis tuning, transmission, body height, and engine. The Subaru BRZ and Toyota 86 are models jointly developed by Subaru and Toyota. Toyota was responsible for the initial market positioning and setting some basic performance indicators, while the exterior and interior were designed by Toyota engineers. Subaru handled the chassis and engineering development. Both the Subaru BRZ and Toyota 86 are manufactured at Subaru's Gunma factory. The differences between the Subaru BRZ and Toyota 86 are as follows: Appearance: The lower grille of the Subaru BRZ has an upward curve, while the Toyota 86's lower grille has a downward curve. Rear Suspension: The Subaru BRZ uses a double-wishbone independent suspension, while the Toyota 86 uses a multi-link independent suspension. Front Grille: The Subaru BRZ features a horizontal bar grille, while the 86 has a mesh grille. Interior: The dashboard backlight of the Subaru BRZ is orange, whereas the 86's dashboard backlight is white. Chassis Tuning: The front suspension springs and shock absorbers of the Subaru BRZ are stiffer than those of the Toyota 86, but the rear suspension is softer. As a result, the Toyota 86 is more prone to drifting, while the Subaru BRZ offers more stable cornering. Transmission: The Toyota 86 is equipped with a 6-speed manual transmission, while the Subaru BRZ has a 6-speed automatic manual transmission. Body Height: The Toyota 86 stands at 1320mm, while the Subaru BRZ is 1285mm tall. Model Codes: The Toyota 86's code is 864UGSE, and the BRZ's code is BRZFA20. Engine: The Toyota 86 is powered by a 2.0L naturally aspirated engine with a maximum horsepower of 260PS, a maximum power of 167kW, and a maximum torque of 215Nm. The Subaru BRZ is equipped with a 2.0L horizontally opposed four-cylinder engine, producing a maximum horsepower of 200PS, a maximum power of 147kW, and a maximum torque of 205Nm. Subaru is a division of Fuji Heavy Industries (FHI), specializing in automobile manufacturing. Established in 1953, it initially focused on producing cars, as well as aircraft and various engines. It is a manufacturer of diverse types of transportation equipment. The Subaru logo features a constellation of six stars. Toyota Motor Corporation, commonly known as "Toyota" (TOYOTA), was founded by Kiichiro Toyoda. Headquartered in Toyota City, Aichi Prefecture, and Bunkyo, Tokyo, Japan, it was originally part of the Japanese Daiichi Company and is affiliated with the Mitsui Group. Toyota is one of the world's top ten automotive companies and the largest car manufacturer in Japan, established in 1933. Toyota Motor is part of the Toyota Group.

8

0

Share

What is the wheelbase of the Excelle?

What are the reasons for the Buick GL8 shaking during acceleration?

How many points are deducted for not fully releasing the handbrake in Subject 2?

What does the yellow exclamation mark on the Wildlander dashboard indicate?

If there's no notification within 3 days after running a red light, does it mean there's no issue?

Does Crossing the White Line and Then Noticing a Red Light Count as Running a Red Light?

What are the differences between the BRZ and the 86?

What is the warranty period for a repaired accident vehicle?

What causes the feeling of fuel interruption when accelerating in a Cruze?

How often should the Baojun 310 be serviced?

How to Defog the Sylphy?