What is the wheelbase of the Emgrand GSe?

1 Answers
ArianaLee
07/29/25 9:26pm
The wheelbase of the Emgrand GSe is: 2700mm. The importance of wheelbase: Wheelbase is a crucial parameter that is closely related to a car's performance. It determines the position of the car's center of gravity. Therefore, once the wheelbase is altered, a complete redesign of the overall layout is necessary, especially the dimensions of the drivetrain and body sections, along with readjusting the parameters of springs and shock absorbers in the suspension system, and the dimensions of the steering trapezoidal linkage in the steering system. The impact of wheelbase: At the same time, changes in wheelbase will also affect the distribution of axle loads between the front and rear axles, which must be taken into account for their effects on the car's braking, handling, and ride comfort. Therefore, the wheelbase parameter is always listed in the car's technical specifications, which sufficiently demonstrates its highly important reference value.
Was this review help?
12
2
Share
More Forum Discussions

How Does the Automotive Air Conditioning System Work?

Here is a detailed introduction to the working process of automotive air conditioning: 1. Compression process: The compressor draws in low-temperature, low-pressure refrigerant gas from the evaporator outlet and compresses it into high-temperature, high-pressure gas, which is then discharged from the compressor. 2. Heat dissipation process: The high-temperature, high-pressure superheated refrigerant gas enters the condenser, where it condenses into a liquid due to the reduction in pressure and temperature, releasing a significant amount of heat. 3. Throttling process: The refrigerant liquid, which is at a higher temperature and pressure, passes through the expansion device, causing its volume to increase and its pressure and temperature to drop sharply, exiting the expansion device as a mist (fine droplets). 4. Heat absorption process: The mist-like refrigerant liquid enters the evaporator. Since the boiling point of the refrigerant is much lower than the temperature inside the evaporator, the refrigerant liquid evaporates into a gas. During the evaporation process, it absorbs a large amount of surrounding heat, and the low-temperature, low-pressure refrigerant vapor then re-enters the compressor.
13
4
Share

How many kilometers should the Vios brake discs be replaced?

Vios brake pads need to be replaced approximately every 30,000 to 60,000 kilometers, and the replacement cycle varies depending on driving habits. The steps for replacing brake pads are as follows: 1. Before replacing the brake pads, open the cover of the brake fluid reservoir in the engine compartment to check the brake fluid level; 2. Prepare the new brake pads to be replaced and remove the wheel where the brake is located. Be careful to avoid scratching the rim during the removal process; 3. Use a wrench with a socket to remove the bolts of the brake caliper, then take out the brake pads. Check if the brake pads are excessively worn or cracked. If so, proceed to the next step of replacement; 4. Since the brake caliper may accumulate a lot of sand or dirt, clean it thoroughly with a cloth and apply anti-noise paste to prevent abnormal noises during braking; 5. Use a piston press to push the piston to its limit, then install the new brake pads onto the brake caliper. After installing the new brake pads, tighten the guide bolts to complete the installation; 6. After installation, cover the reservoir cap, get into the car, and press the brake pedal several times to reset the brake. Then check the brake fluid level to ensure it is within the appropriate range; 7. After replacement, test drive the car to check if the braking effect is achieved.
16
0
Share

What Causes Abnormal Noises from the Chassis After Parking?

There are many reasons for abnormal noises from the chassis after parking a car. Below is a detailed analysis of the specific causes of abnormal noises from the chassis after parking: 1. Cooling noise from the catalytic converter: The normal operating temperature of the catalytic converter is 400-800°C. After the engine is turned off, its operation gradually stops, and the temperature decreases, causing the internal metal components to expand and contract due to heat, resulting in abnormal noises. 2. Cooling noise from the exhaust pipe: Typically, the exhaust pipe reaches temperatures above 200°C during cold idle. When the car is under high load or there is combustion of the air-fuel mixture in the exhaust pipe, the temperature can be even higher. Therefore, the exhaust pipe also undergoes thermal expansion and contraction, producing abnormal noises, often originating from the front end of the exhaust pipe and the flexible joint. 3. Cooling noise from the turbocharger: Under normal conditions, the exhaust gas temperature can reach 700°C, accelerating the friction-generated heat from the turbocharger's rapid rotation. After the engine is turned off, the thermal expansion and contraction are quite noticeable, leading to abnormal noises.
7
3
Share

What Causes the Hissing Sound When Braking?

The reasons for abnormal brake noises are: 1. Rust on brake discs or pads: After prolonged parking, especially in humid weather or after rain, rust or dirt may form on the brake discs or pads. This issue can be addressed by applying butter or specialized lubricant to the connection between the brake pads and calipers. 2. New brake pads: New cars may produce similar noises when braking. New brake pads and discs require a break-in period, and such noises during braking are completely normal. 3. Excessive wear on brake discs or pads: Both brake discs and pads are high-wear components that experience friction with every brake application. Over time, wear naturally occurs, and excessive wear will lead to abnormal noises. Therefore, regular inspection and replacement are necessary. Typically, brake pads should be replaced every 60,000-80,000 kilometers, while brake discs should be replaced every 100,000-120,000 kilometers. 4. Installation issues: If the brake pads are installed incorrectly or are of the wrong model, abnormal noises may occur. Reinstalling the brake pads is recommended, and car owners should have this done at a professional auto repair shop.
19
1
Share

How Long Does It Take to Receive the Vehicle Inspection Sticker Online?

It generally takes 3-5 working days to receive the vehicle inspection sticker online. Below are the specific steps to apply for the vehicle inspection sticker online: 1. Log in: Open the Traffic Management 12123 mobile app, enter your account and password to log in; after entering the homepage, click the 'More' option, and under the motor vehicle services section, find the 'Apply for Inspection Exemption Sticker for Exempt Vehicles' function. 2. Complete registration: Select the motor vehicle that has been registered and requires the inspection sticker. If it hasn't been registered, complete the registration first before selecting; read the 'Service Instructions' and click 'Read and Agree'. 3. Apply for the sticker: After entering the information confirmation page, verify the relevant details. If you need to apply for a paper version of the inspection sticker, check the 'Apply for Paper Version Sticker' option below, proceed to the mailing address selection page, and fill in the recipient's address; if applying for an electronic inspection certificate, you will be directly redirected to the information submission page. After clicking 'Submit', the system will review your application within 1-2 working days. This method is applicable to all models of Android and Apple systems.
13
1
Share

How many seconds does the Trumpchi GS4 take to accelerate from 0 to 100 km/h?

The 0-100km/h acceleration time of the Trumpchi GS4 is 11.61 seconds. Here is an introduction to the Trumpchi GS4: 1. Exterior design. The Trumpchi GS4 is positioned as a compact SUV. It adopts the Lingyun Wing 3.0 design language, with the front grille integrated with the headlights, making the GS4 look more imposing and recognizable. Meanwhile, the GS4 offers two styles of front grilles for consumers to choose from. Additionally, the GS4's headlight assembly features dual-module LED light sources, officially referred to as the 'Dual-Star Cruise Full LED Headlights,' complemented by diamond-array turn signals, giving the GS4 a more refined appearance while maintaining the family styling. 2. Interior design. The Trumpchi GS4 uses the 'X' element as its design core, offering all-black and black-brown mixed-color interior options. It features what the manufacturer calls a dual 'X' themed dashboard design, with the central control area adorned with high-gloss chrome trim strips that form an X shape on both the driver and passenger sides. The dual 12.3-inch continuous screen also enhances the car's high-tech feel. 3. Powertrain. The Trumpchi GS4 is equipped with a high-power version of the 1.5T turbocharged engine, delivering a maximum power of 169 horsepower and a peak torque of 265 N·m.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.