What is the wheelbase of the DS6?

What type of gasoline should the Borgward BX5 use?

Borgward BX5 uses 92-octane gasoline. The method and basis for gasoline selection are introduced as follows: Gasoline selection method: The difference between 92-octane and 95-octane gasoline is not significant, mainly in the octane rating, which affects the anti-knock performance. The choice should be based on the engine's compression ratio. You can refer to the vehicle's manual, which specifies the engine's compression ratio and the recommended gasoline grade. Basis for gasoline selection: Compact cars generally have engines with moderate requirements, with compression ratios between 8.6 and 9.9. Mid-size cars have engines with compression ratios between 10 and 11.5. For compression ratios exceeding 11.5, higher-octane gasoline may be considered, as these engines are typically found in luxury brand vehicles with strong performance. Engines with compression ratios between 8.6 and 9.8 are suitable for 92-octane gasoline, while those between 10 and 11.5 are suitable for 95-octane gasoline.

13

4

Share

Where is the radiator located on the Baojun 530?

The radiator of the Baojun 530 is located in the engine compartment, on the right side. The radiator is also called the antifreeze tank. What is actually filled in the car radiator is not water, but antifreeze. The coolant filled in the radiator is also a mixture of antifreeze concentrate and water in a certain standard ratio. The following is a related introduction to antifreeze: 1. The full name of antifreeze should be antifreeze coolant, meaning coolant with antifreeze function. Antifreeze can prevent the coolant from freezing and cracking the radiator or freezing the engine cylinder block or cover when parking in cold winter. 2. In addition to antifreeze, antifreeze also has anti-corrosion function. The engine and its cooling system are made of metal, including copper, iron, aluminum, steel and solder. These metals will be corroded and rusted after long-term contact with water at high temperatures. Antifreeze will not only not cause corrosion to the engine cooling system, but also has anti-corrosion and rust removal functions.

12

4

Share

What is the problem when the starter smokes?

The reasons for the starter smoking include battery short circuit, circuit aging, and separator damage. Here are the detailed explanations: Battery short circuit: It is most likely caused by poor quality or damage to the separator, allowing the active material of the electrode plates to pass through. If the separator is of poor quality, impurities will form when ions pass through it, leading to a short circuit between the two electrode plates. Due to the large short-circuit current, the separator will be scorched, causing further damage. The more severe the short circuit between the two plates, the greater the short-circuit current, creating a vicious cycle. Eventually, smoke will be emitted from the battery's vent hole, resulting in the phenomenon of the battery smoking. Additionally, conductive objects falling into the battery can also cause a connection between the positive and negative terminals, leading to a short circuit. Circuit aging: Smoking can also be caused by circuit aging. Most cases are due to the battery reaching the end of its lifespan. Separator damage: Separator damage is mostly caused by sparking between the electrode plates.

8

2

Share

What are the reasons why the five major assemblies cannot be sold?

Selling or buying the five major assemblies of used cars is illegal. According to the national "Regulations on the Recycling of Scrapped Automobiles", the engine assembly, steering gear assembly, transmission assembly, front and rear axles, and frame removed from scrapped vehicles cannot be bought or sold. In addition to the five major assemblies, purchased used parts should be carefully inspected by the installer. If the used parts have minor damage, deformation, or are not as good as the original parts, it is best to return or replace them immediately. The functions of the five major automobile assemblies: Engine: Converts petroleum fuels such as gasoline or diesel into rotational torque. Transmission: Uses neutral gear to interrupt power transmission, allowing the engine to start, idle, and facilitating gear shifting or power output. Front axle: Transmits the engine power, after being reduced in speed and increased in torque by the clutch and transmission, to the final power output—the wheels—through the front drive axle assembly. Rear axle: The rear axle is merely a follower axle, serving only a load-bearing function. Frame: The frame should be arranged close to the ground to lower the vehicle's center of gravity, thereby improving driving stability.

7

4

Share

What is the Scrapping Period for Mini Trucks?

Mini trucks have a mandatory scrapping period of 8 years. A mini truck refers to a commercial vehicle with a length ≤3500mm and a total mass ≤1800kg. Once the service life reaches 8 years, it must be scrapped compulsorily. Light-duty and large commercial trucks have a scrapping period of 10 years. Difference between recommended scrapping and compulsory scrapping: Recommended scrapping suggests disposal, but the vehicle can remain in use if it still meets operational requirements. Compulsory scrapping means the vehicle must be decommissioned without exception. There are four criteria for compulsory scrapping: 1. Reaching the prescribed service life; 2. Failing to meet national safety technical standards for in-use vehicles after repairs and adjustments; 3. Still exceeding national emission or noise standards for in-use vehicles after repairs, adjustments, or control technology implementation; 4. Failing to obtain valid inspection certification for three consecutive inspection cycles after the validity period expires. According to Article 43 of the 'Motor Vehicle Registration Regulations', when applying for new vehicle registration after transferring or deregistering an old vehicle, the original owner may request to retain the old license plate number. The following conditions apply: the application must be submitted within six months after transfer/deregistration, and the owner must have possessed the original vehicle for over three years.

2

5

Share

What is the passing score for C1 Subject 3?

C1 Subject 3 exam has a full score of 100, with 80 being the passing mark. The C1 exam consists of four subjects: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving common sense. C1 driver's license exam passing standards: Traffic regulations and related knowledge (Subject 1) — written test, full score of 100, passing score is 90 or above. Field driving (Subject 2) — on-site, actual vehicle. Minimum requirement is 80, below 80 is failing. Road driving (Subject 3) — highway or simulated site, actual vehicle. Full score is 100, must achieve 90 or above to pass. Safe and civilized driving common sense — written test, questions mainly in the form of cases, pictures, animations, etc., question types include true/false, single-choice, and multiple-choice, totaling 50 questions, full score of 100, passing score is 90. C1 application age: The minimum age limit for a C1 driver's license is 18 years old, with no upper age limit. However, applicants aged 70 and above must pass tests on memory, judgment ability, and reaction ability.

20

0

Share

What is the wheelbase of the DS6?

What type of gasoline should the Borgward BX5 use?

Where is the radiator located on the Baojun 530?

What is the problem when the starter smokes?

What are the reasons why the five major assemblies cannot be sold?

What is the Scrapping Period for Mini Trucks?

What is the passing score for C1 Subject 3?

How to deal with 10% speeding while driving a motor vehicle?

What Causes Engine Control System Failure?

Is it necessary to install cruise control?

Where are the car airbags installed?