What is the wheelbase of the Crown?

Is it normal for the Magotan engine oil temperature to be 120℃?

An engine oil temperature of 120℃ in a Magotan is abnormal. The normal operating temperature range for engine oil is generally between 70-90℃. When the oil temperature is excessively high, it is advised that the owner should not continue driving. Effects of excessively high oil temperature: 1. Reduced oil viscosity: This causes the oil viscosity to decrease, leading to oil burning and inability to form an oil film to protect friction surfaces of components, accelerating part aging. The reduced viscosity also weakens sealing performance, allowing oil to enter the combustion chamber under pressure, resulting in oil burning. This not only consumes more oil but also prevents complete combustion of gases in the combustion chamber, leading to polluted exhaust emissions. In severe cases, it may cause bearing seizure or cylinder scoring. 2. Power reduction: Excessive engine temperature causes fuel injected into the cylinders to ignite prematurely, reducing compression force and lowering power output. Additionally, thermal expansion of components may cause operational jamming, significantly reducing bearing performance and efficiency, leading to a series of adverse consequences.

4

0

Share

What causes a strong gasoline smell when starting a car?

The reasons for a strong gasoline smell when starting a car include issues with the solenoid valve, excessive carbon buildup, and fuel injector leakage. Solenoid valve issues: Problems with the carbon canister or carbon canister solenoid valve can cause an overly rich air-fuel mixture. Excessive carbon buildup: Too much carbon buildup inside the engine can lead to poor atomization of the air-fuel mixture. Fuel injector leakage: Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from petroleum through distillation or cracking processes, used as fuel. Gasoline has a high octane rating (anti-knock combustion performance) and is graded by octane levels into various types such as 89, 90, 92, 93, 95, 97, and 98.

6

1

Share

Is U-Turn Allowed at a Red Light?

If the U-turn signal is red, you must wait; otherwise, it will be considered running a red light. According to the "Road Traffic Safety Law," this offense carries a penalty of 6 demerit points and a fine of 200 yuan. If there is no U-turn signal, and the gap is marked with a dashed line, the U-turn is not affected by traffic signals and does not require crossing the pedestrian crossing. However, if the gap is marked with a solid line, the U-turn must cross the pedestrian crossing and is subject to the left-turn signal. Performing a direct U-turn may result in being photographed or penalized by on-site traffic police. When making a U-turn that requires crossing a pedestrian crossing, yielding to pedestrians is mandatory: If pedestrians are walking on the right side of the crosswalk and have not reached the centerline of the road, vehicles on the left side must slow down and ensure safe passage for pedestrians. If pedestrians are waiting outside the boundary of the motorized and non-motorized lanes and have not entered the roadway, vehicles should slow down and proceed safely. If pedestrians cross the boundary between motorized and non-motorized lanes, vehicles failing to stop and yield constitute a violation and are subject to penalties. Once pedestrians enter the motorized lane via the crosswalk, vehicles must slow down and proceed safely. Failure to yield is a violation and punishable. If pedestrians wait at the centerline without entering the motorized lane, vehicles failing to stop are in violation and subject to penalties. If pedestrians cross the centerline into the motorized lane, vehicles failing to yield are in violation and punishable. In areas where the road is divided by greenery, vehicles must slow down and proceed safely when pedestrians are waiting in the median. Permissible U-turn scenarios: If an intersection has a U-turn sign, a U-turn is allowed. If there is a U-turn signal, follow its instructions. Without a signal, perform the U-turn safely without obstructing other traffic or pedestrians. If an intersection has no explicit prohibition against U-turns or left turns, a U-turn is permitted. The absence of "No U-turn" or "No Left Turn" signs or solid centerlines means U-turns are allowed. U-turns are also allowed in yellow grid zones. These zones prohibit stopping but permit U-turns unless a central barrier is present. If a U-turn signal is present, follow it—only proceed on green. If "No Left Turn" and "U-turn Allowed" signs coexist, U-turns are permitted, but left turns are not. Note that "No U-turn" does not equate to "No Left Turn." Key considerations when making a U-turn: Check road markings—solid lines prohibit U-turns under any circumstances; continue driving to find a suitable location. If a "No Left Turn" sign is present, U-turns are also prohibited, even if not explicitly stated, as U-turns involve left-turn movements. U-turns must be made from the innermost left-turn lane. U-turns from the second left-turn lane are not allowed. Always yield to oncoming traffic when making a U-turn. Interfering with straight-moving vehicles makes you fully liable for any accidents. Lane arrows near intersections guide vehicle movements. The leftmost lane may not always have a left-turn arrow—if it shows a straight arrow, U-turns are prohibited even without explicit signs.

13

0

Share

Should You Shift Gears or Pull the Handbrake First When Driving a Manual Transmission Car?

Shift gears first when driving a manual transmission car. Driving startup sequence: When driving, shift gears first and then pull the handbrake. When parking, if driving a manual transmission, first press the clutch to shift into neutral, then step on the brake pedal. Once the vehicle comes to a complete stop, tighten the handbrake. Function of the handbrake: The principle behind the handbrake stopping the vehicle is by clamping the rear brake discs, preventing the rear wheels from rotating. Mechanical cable-type handbrakes use steel cables to pull the brake calipers, which then clamp the brake discs, while electronic handbrakes operate by activating servo motors on the brake calipers to clamp the brake discs. Function of shifting gears: Shifting gears (changing gears) refers to the transmission, which is used to alter the torque and speed of the engine crankshaft. This adaptation meets the varying needs of driving wheels for traction and speed under different driving conditions, such as starting, accelerating, driving, and overcoming various road obstacles.

1

Share

Do You Need to Press the Handbrake Button?

When pulling the handbrake, it is not necessary to press the handbrake button, but the button should be pressed when releasing the handbrake. Function of the handbrake button: The handbrake button is called the parking brake lock button, which prevents accidental release of the parking brake. Therefore, the correct method is not to press the button when pulling the parking brake, but to press the button when releasing the parking brake. Without pressing the button, the brake cannot be released. The handbrake is technically called the parking brake, which mainly controls the rear wheels—in simple terms, it brakes the rear wheels. It is generally used when parking on flat roads or slopes. Its structure is quite simple, consisting mainly of a handle and a button. Principle of the handbrake: The principle of the handbrake is based on the lever mechanism, where a steel cable activates the braking device of the rear wheels. The key components are the locking tooth and gear, which automatically engage with each other.

4

Share

Why can't motorcycles be registered on Traffic Management 12123?

Motorcycles cannot be registered on Traffic Management 12123 because the platform does not provide registration services for motorcycles. Traffic Management 12123 services: Provides comprehensive traffic safety services for vehicle owners and drivers, including: personal user registration on the internet service platform, appointment, acceptance, and processing of vehicle/driver's license/traffic violation-related services, traffic safety information inquiries, service notifications and reminders, service guidance, and road access services. Functions of 12123: Traffic Management 12123 has previously added an online self-service function for handling traffic violations. Vehicle owners can handle point deductions and pay fines on the Traffic Management 12123 platform. The mobile app can process personal violation information related to vehicles, driver's licenses, and traffic violations. It also publishes driving school training quality (including pass rates, traffic violation rates, and accident rates), examination schedules, vehicle number selection segments, and other information to enhance service management transparency. It also reports and notifies school bus management units and others about traffic accidents and violations to promote traffic safety source management.

14

4

Share

What is the wheelbase of the Crown?

Is it normal for the Magotan engine oil temperature to be 120℃?

What causes a strong gasoline smell when starting a car?

Is U-Turn Allowed at a Red Light?

Should You Shift Gears or Pull the Handbrake First When Driving a Manual Transmission Car?

Do You Need to Press the Handbrake Button?

Why can't motorcycles be registered on Traffic Management 12123?

How Many Vehicles Are There in China?

Do I Need to Replace the Brake Disc When Replacing Brake Pads?

What Are the Consequences of an Intercooler Pipe Leak?

Differences Between Hybrid and Fuel-Powered Vehicles