What is the wheel speed channel number for Volkswagen ABS?

Should You Turn Off the Engine Before Shifting to P Gear or Vice Versa?

When parking after driving, you should turn off the engine before shifting to P gear. After the engine is turned off, the vehicle may move slightly due to uneven road surfaces. If you shift to P gear first, the locking mechanism of the transmission engages with the gears, and any movement at this point can cause impact on the transmission gears. After the vehicle is parked, always shift to P gear and not to N gear. Although both N gear and P gear can be used when parking, there is a difference between the two. N gear does not have a locking mechanism, whereas P gear does. Once shifted to P gear, the vehicle will not roll even if the brake pedal is not pressed. When the gear is in N gear, the transmission's locking mechanism does not engage, and the vehicle may roll if the brake pedal is not pressed. Here are some notes on shifting gears in different situations for automatic transmission vehicles: Normal driving: There is no specific requirement for gear selection; you can drive continuously in D gear. Reversing: After pressing the brake to stop the vehicle's forward movement, shift to R gear. Gently releasing the brake will allow the vehicle to move in reverse. Waiting while parked or driving in congested traffic: You can shift to N gear. Highway driving or overtaking at high speed: You can shift to S gear. S gear is the vehicle's sport mode, allowing free gear changes like D gear. It can also be used when climbing slopes, as this gear provides maximum torque output and acceleration.

7

0

Share

What is the normal tire pressure for a Camry?

The normal tire pressure range for a Camry is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. If you want to check the current tire pressure of your Camry during daily driving, you can activate the tire pressure monitoring system, and the tire pressure values will be displayed on the central LCD screen of the instrument panel. The specific method is to use the multifunction buttons on the steering wheel to navigate to the left menu bar, where there is a vehicle icon. Clicking on it will show the specific tire pressure values. Generally, a tire pressure above 2.8 bar is considered too high, and a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causing steering wheel vibration and deviation, reducing driving comfort; accelerating wear on the central tread pattern of the tire, shortening tire lifespan; increased body vibration, indirectly affecting the lifespan of other components; excessive stretching deformation of the tire cords, reducing tire elasticity, and increasing the load on the car during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causing heavy steering and deviation, which are unfavorable for driving safety; increased movement of various parts of the tire, leading to abnormal heat due to excessive rolling; reduced functionality of the cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplied friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually, it will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are needed. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring light to stay on. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, the tire pressure warning light will also come on. For sensor damage, the only solution is to replace it with a new one.

18

1

Share

Where is the best position to install ETC?

For passenger cars, the ETC device is generally installed in the upper middle section of the front windshield. For large vehicles such as trucks and buses, the installation position is on the upper part. The suitable installation height should be no less than 1.2 meters and no more than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect microwave communication signal transmission, the device should be installed in the microwave transponder zone. ETC stands for Electronic Toll Collection system. To apply for ETC, the vehicle owner needs to provide original and photocopies of their valid ID card and vehicle registration certificate. If applying through an agent, the agent's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. A bank card for deducting highway tolls is needed, and the vehicle must be registered under an individual aged between 18 and 60. Documents required for company vehicles: An introduction letter from the vehicle owner (with official seal); Copy of the organization code certificate or business license (with official seal); Original ID card of the agent; Original vehicle registration certificate; The vehicle that needs ETC installation. Here are some important notes for ETC installation: Do not obstruct the driver's view. The best position is behind the rearview mirror: Many car models have windshields with a steep incline, which can reduce the driver's field of vision. Installing the ETC device without considering this may increase blind spots. Installing it on the right side behind the rearview mirror can help avoid obstructing the view. Do not interfere with charging: The ETC device requires power but generally doesn't need charging or battery replacement, as it has a built-in solar panel for self-charging. Therefore, avoid installing it on the blackened areas of the windshield or positions that might block the solar panel. Once installed, do not remove it arbitrarily: The adhesive pad has an anti-tamper switch. When the device is installed on the windshield, the switch is pressed in. If removed, the switch will pop out and lock the device, requiring an ETC service center to unlock it. This feature prevents multiple vehicles from sharing one device. Points to note when using ETC:

5

2

Share

How to Deregister a Motorcycle?

The "Motor Vehicle Registration, Transfer, Deregistration/Transfer Application Form"; the original "Motor Vehicle Registration Certificate"; the original "Motor Vehicle Driving License"; the motor vehicle license plate; for scrapped and dismantled vehicles, the original copy of the "Scrapped Motor Vehicle Recycling Certificate" should also be provided, and for vehicles under supervision, the original "Motor Vehicle Inspection Record Form" should also be provided; for lost motor vehicles, the original motor vehicle loss certificate should also be provided; For proxy registration, the agent's identity proof and the original written power of attorney with legal effect issued by the motor vehicle owner should also be provided. If you have questions about purchasing or deregistering a motorcycle, you can visit Hello Moto. Hello Moto provides users with comprehensive one-stop motorcycle services, integrating community, tools, and content. It offers popular motorcycle news and professional vehicle selection services, making it the largest comprehensive motorcycle service platform in the country. How to deregister a motorcycle with an out-of-town license plate? Motorcycle license plates cannot be deregistered in a different location. Only motor vehicles that have reached the national mandatory scrapping standard can be deregistered in a different location. For registered motor vehicles that have reached the national scrapping standard, are lost, or are no longer used on roads in China for any reason, the motor vehicle owner should fill out the "Motor Vehicle Registration Application Form" and apply for deregistration at the vehicle management office of the motor vehicle's jurisdiction with the following documents: Can a motorcycle license plate be re-registered after deregistration? Generally, motor vehicles that have reached the national mandatory scrapping standard cannot apply for re-registration! According to the motor vehicle deregistration regulations: Article 27 For motor vehicles that have reached the national mandatory scrapping standard, when the motor vehicle owner delivers the motor vehicle to a recycling enterprise, they should fill out the application form and submit the motor vehicle registration certificate, license plate, and driving license. The motor vehicle recycling enterprise should confirm the motor vehicle and dismantle it, issuing the "Scrapped Motor Vehicle Recycling Certificate" to the motor vehicle owner. Large scrapped buses, trucks, and other operational vehicles should be dismantled under the supervision of the vehicle management office. The motor vehicle recycling enterprise should submit the application form, motor vehicle registration certificate, license plate, driving license, and a copy of the "Scrapped Motor Vehicle Recycling Certificate" to the vehicle management office within seven days after dismantling the motor vehicle to apply for deregistration. The vehicle management office should review the submitted proofs and certificates within one day from the date of acceptance, retrieve the motor vehicle registration certificate, license plate, and driving license, and issue a deregistration certificate.

8

2

Share

What is the tire size for the Honda Lingpai?

The Honda Lingpai has two tire sizes: 215/55R16 and 215/50R17. In 215/55R16, the first number 215 represents the tire width of 215MM, 55 indicates the aspect ratio of the tire cross-section is 55%, meaning the cross-section height is 55% of the width, and 16 denotes the rim diameter is 16 inches. The letter "R" in the middle stands for radial tire. In 215/50R17, the first number 215 represents the tire width of 215MM, 50 indicates the aspect ratio of the tire cross-section is 50%, meaning the cross-section height is 50% of the width, and 17 denotes the rim diameter is 17 inches. The letter "R" in the middle stands for radial tire. The Honda Lingpai features a petal-style wheel design and comes with two original tire brands: Linglong with the tread pattern CrossWind HP010, and MAXXIS with the tread pattern VICTRA 510. The spare tire is non-full size. If you want to replace the tire yourself, follow these steps: Take out the spare tire and jack, place the jack under the vehicle frame near the tire to be replaced, ensuring the jack contacts the metal part of the frame; Raise the jack until it supports the car, making sure the jack is positioned under the vehicle and is perpendicular to the ground; Remove the hubcap and loosen the nuts counterclockwise, but do not fully unscrew them—just enough to eliminate resistance. Keeping the tire on the ground when first loosening the nuts ensures the nuts turn instead of the tire; Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, then remove them completely; Place the new tire on the hub, carefully aligning the tire rim with the wheel bolts, install the lug nuts, and hand-tighten them until all nuts are snug. The tire replacement is now complete. Besides the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tires. Speed rating: Indicates the maximum speed the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Shows the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F".

3

Share

How Many Times Can You Take the Subject 4 Exam?

According to the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' there is no limit to the number of times you can take the Subject 4 exam. If you fail the first attempt on the same day, you can retake it once on the spot. If you still fail, you need to reschedule the exam, and no retake fee is required. However, it is important to note that the validity period of the driving skill test permit is three years. If the applicant fails to complete the exam within this period, the results of any previously passed subjects will be invalidated. Subject 4 consists of 50 questions, primarily in the form of case studies, images, and animations, with a full score of 100 and a passing score of 90. Subject 4, also known as the Subject 4 theory test or driver's theory test, is part of the motor vehicle driver's license assessment. After the implementation of the Ministry of Public Security's Order No. 123, the Subject 3 exam was divided into two parts: the road test and the addition of the safety and common sense test, commonly referred to as 'Subject 4,' which evaluates 'driving ethics.' Subject 4 is the colloquial term for the Subject 3 safety and common sense driving test and is not a separate subject. Since this test is conducted after Subject 3, it is commonly referred to as the Subject 4 exam. Officially, there is no Subject 4. The safety and common sense driving test is conducted after Subject 3. Subject 4 Exam Notes: Exam Duration: The exam lasts 30 minutes. If you make 12 mistakes (6 questions) during the test, the exam will be terminated. Number of Questions: Depending on the type of driver's license being tested, 50 questions are randomly selected from the corresponding Subject 4 question bank. For car licenses, questions are drawn from a pool of 800, while for large vehicle licenses, they are drawn from 1,023. Each question is worth 2 points. Question Types: The exam includes single-choice questions (including true/false questions) and multiple-choice questions. The first 45 questions are single-choice, and the last 5 are multiple-choice. The exam also includes animation-based questions, image-based questions, scenario recognition questions, and text-based questions. Retake Notes: If you fail Subject 4, you only need to retake Subject 4. The driving school will schedule the retake, and there is no limit to the number of retakes. You can retake the exam until you pass, and no retake fee is required. Subject 4 Exam Tips: Strengthen weak areas and identify the reasons for mistakes. For marked questions, do not just memorize the correct answers. Instead, consult regulations, textbooks, or reference materials to understand and internalize the reasons for errors. Categorize and summarize questions. Refer to the question bank analysis for classification and identify similar questions: The question bank contains many similar questions that can be easily confused. These should be analyzed and summarized. For example, traffic signs for walking, hiking, pedestrian crossing, and pedestrian crossing warnings are very similar and can be confusing. During study, categorize them to avoid mistakes. Find memory techniques: Many questions in the bank involve numbers. Summarizing these numbers can make them easier to remember. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 3 is divided into two parts. Subject 1 refers to the traffic safety laws, regulations, and related knowledge test. Subject 2 refers to the field driving skills test. Subject 3 refers to the road driving skills and safety and common sense driving test.

9

0

Share

What is the wheel speed channel number for Volkswagen ABS?

Should You Turn Off the Engine Before Shifting to P Gear or Vice Versa?

What is the normal tire pressure for a Camry?

Where is the best position to install ETC?

How to Deregister a Motorcycle?

What is the tire size for the Honda Lingpai?

How Many Times Can You Take the Subject 4 Exam?

What Causes Frequent Loss of Brake Fluid?

What is the 0-100 km/h acceleration time of the Mercedes-Benz C200L?

What is the appropriate tire pressure for the Elysion?

Should I cancel my ETC if I don't use it?