What is the wheel size of the Baojun 310?

Consequences of Inflating Tires with Nitrogen?

Tire inflation with nitrogen can enhance vehicle stability under extreme conditions. Here are the advantages of inflating tires with nitrogen: 1. Effectively prevents tire blowouts or under-inflation damage. Tire blowouts are one of the main causes of highway traffic accidents. During high-speed driving or emergency braking, the friction between the tire and the road surface becomes more intense. The temperature of ordinary gas inside the tire rises rapidly, leading to a sudden increase in tire pressure, which can cause a blowout. This is especially important for old tires or those with damaged sidewalls. 2. Reduces tire noise and improves driving stability and comfort. Nitrogen is an inert gas with extremely low chemical reactivity. Its molecules are larger than oxygen molecules, making it less prone to thermal expansion and contraction. The deformation range is also much smaller compared to air. Nitrogen permeates through the tire sidewall about 30-40% slower than air, helping to maintain stable tire pressure, improve driving stability, and ensure comfort. Nitrogen has low sound conductivity, approximately one-fifth that of ordinary air, so using nitrogen can effectively reduce tire noise and enhance driving quietness.

15

1

Share

Do China V vehicles require urea addition?

China V vehicles must add urea. Hazards of not adding urea to China V vehicles: For the vehicle itself: China V vehicles must add urea. If not added, it may cause the vehicle to experience torque limitation, inability to accelerate, lack of power, and increased fuel consumption. Environmental protection: The government has introduced new environmental policies focusing on the treatment of diesel vehicle exhaust. Vehicle urea, as a mandatory additive, is used to process nitrogen oxides in the exhaust, reducing the emission of substances harmful to the atmosphere. Therefore, not adding urea will cause pollution to the atmosphere. Traffic law enforcement: Nowadays, many regions have exhaust emission detection points, similar to speed detection. If the exhaust exceeds the standard and is detected, the vehicle will be penalized.

7

1

Share

What is the normal value of engine intake flow?

Most vehicles have an intake flow rate between 1000-1500g/s. Intake flow in different gears: This cannot be precisely determined as intake volume varies with engine displacement. The specific value depends on which gear is engaged, as different gears have different intake volumes. To determine normal intake flow, calculate based on your vehicle's displacement. Generally, an intake flow of 1000-1500g/s is considered normal for most vehicles. Intake volume: Intake volume refers to the flow rate of fresh air entering the car engine, which provides the necessary oxygen for proper engine operation. Accurate estimation of cylinder intake volume under transient conditions is one of the effective measures to improve the precision of engine air-fuel ratio control.

6

2

Share

What is the standard range of Model Y?

The following are the standard ranges of Model Y: 1. Long Range All-Wheel Drive: The 2021 Model Y Long Range All-Wheel Drive version has a pure electric range of 594 km according to the Ministry of Industry and Information Technology. 2. Performance All-Wheel Drive: The 2021 Model Y Performance All-Wheel Drive version has a pure electric range of 480 km according to the Ministry of Industry and Information Technology. The following is an introduction to the Model Y: 1. Models: Currently, there are only two models available for sale, both of which are 5-door, 5-seat SUV models. 2. Model Y body dimensions: The Model Y has a body length of 4750 mm, a width of 1921 mm, a height of 1624 mm, a wheelbase of 2890 mm, a front track of 1636 mm, a rear track of 1636 mm, a curb weight of 1997 kg and 2010 kg (the two different models have different weights), and a vehicle warranty of 4 years or 80,000 km, whichever comes first.

4

1

Share

What is the refrigerant charging amount for Wuling Hongguang?

Wuling Hongguang's air conditioning system generally requires about 800 grams of refrigerant, which means 4 cans (200 grams per can). You can also refer to the vehicle manual for the specified refrigerant amount or control the charging quantity based on the pressure reading from the air conditioning pressure gauge. Below is the method for low-pressure side refrigerant charging in Wuling Hongguang: Connect the manifold gauge set to the compressor and refrigerant canister; Open the refrigerant canister, loosen the nut on the manifold gauge set's center charging hose until refrigerant vapor flow is heard, then tighten the nut to purge air from the charging hose; Open the low-pressure manual valve to allow refrigerant into the system. Close the low-pressure manual valve when system pressure reaches 0.4MPa; Start the engine, turn on the AC switch, and set both blower and temperature controls to maximum; Open the manifold gauge set's manual valve to continue charging refrigerant until reaching the specified amount; After completion, close the low-pressure manual valve on the manifold gauge set, shut the charging valve on the refrigerant canister, stop the engine, and quickly disconnect the manifold gauge set from the compressor to prevent excessive refrigerant leakage. Precautions for refrigerant charging: Wear protective goggles and rubber gloves to prevent refrigerant contact with exposed skin; Never weld pipes before completely evacuating refrigerant to avoid toxic gas generation from heated refrigerant; Perform refrigerant discharge in well-ventilated areas or collect it in sealed containers. Since refrigerant is colorless, odorless, and much denser than air at room temperature, it may accumulate and cause suffocation hazards; Older vehicle AC systems used R12 refrigerant, while modern systems typically use R134a. During proper refrigerant charging, never mix different refrigerant types or use incompatible compressor oils.

18

0

Share

Is Study Required for 11 Demerit Points?

C-class driver's license holders do not need to attend study sessions for 11 demerit points. Article 59 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses': If a motor vehicle driver's demerit points in a scoring cycle do not reach 12, and the imposed fines have been paid, the demerit points will be cleared; if the demerit points do not reach 12 but there are unpaid fines, the demerit points will carry over to the next scoring cycle. Article 58 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses': If a motor vehicle driver accumulates 12 demerit points in a scoring cycle, the traffic management department of the public security organ shall detain their motor vehicle driver's license.

19

5

Share

What is the wheel size of the Baojun 310?

Consequences of Inflating Tires with Nitrogen?

Do China V vehicles require urea addition?

What is the normal value of engine intake flow?

What is the standard range of Model Y?

What is the refrigerant charging amount for Wuling Hongguang?

Is Study Required for 11 Demerit Points?

What should be paid attention to when driving on icy and snowy roads?

What are the precautions for changing tires with tire pressure monitoring?

What is the difference between Porsche and Porsche?

How to Solve the Problem of Odor in Car Air Conditioning System?