What is the WEY model?

What is the actual 0-100 km/h acceleration time of the Tiguan 280?

The 0-100 km/h acceleration time of the Tiguan 280TSI is 9.36 seconds, which is competitive among its peers. 100-0 km/h braking performance: During the final braking test, the Tiguan demonstrated a very high standard, with strong braking force and excellent consistency. However, due to wet road conditions, the vehicle slid slightly after coming to a complete stop. The final braking distance was 37.26 meters. Variability in 0-100 km/h acceleration results: Different environmental temperatures, road conditions, vehicle wear conditions, and even the amount of remaining fuel in the tank can all affect test results. Therefore, there are no two identical acceleration test results.

7

0

Share

What are the interior features of the BMW X2?

BMW X2 interior features mainly include the following: Electronic Stability Program (ESP): Effectively prevents body sideslip, tailspin and other out-of-control situations. It is generally not recommended for drivers to manually turn it off. Parking Radar/Image: This button activates the panoramic image and radar function, providing drivers with alarm and visual feedback to detect surrounding obstacles. Auto Hold: When stopping at traffic lights and other situations, after releasing the brake pedal, the auto hold function will lock the wheels, relieving the driver's foot fatigue. Stepping on the accelerator will trigger the unlocking of the wheels, allowing the vehicle to continue driving.

13

0

Share

What causes the Audi Q5 system to run lean at idle?

Audi Q5 system running lean at idle reasons: Air leaks after the mass air flow (MAF) sensor, PCV system leaks, faulty oxygen sensor, exhaust leaks near the oxygen sensor, EGR leaks, dirty mass air flow (MAF) sensor, clogged fuel injectors, insufficient fuel supply from the fuel pump, etc. Symptom manifestations: Intake system air leaks, insufficient fuel pressure, poor cylinder performance, inaccurate air flow meter data, damaged fuel injectors, malfunctioning ignition system, etc. Fault range: The fault range involves fuel, air, or emission control. An excessively rich air-fuel ratio indicates excessive fuel delivery, while an excessively lean air-fuel ratio indicates insufficient fuel delivery. A system running too lean means the fuel quantity (relative to air intake) is too low.

19

2

Share

What Maintenance Should Be Done at 80,000 Kilometers for a Sedan?

When a sedan reaches 80,000 kilometers, maintenance and replacement should be performed on the transmission fluid, transmission filter, brake pads, belts, spark plugs, engine oil, air filter, fuel filter, oil filter, and cabin air filter. The car's tires also need to be replaced. If it's an automatic transmission vehicle, the transmission fluid should be changed at 80,000 kilometers. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the vehicle. The purpose is to keep the car clean and in good technical condition, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.

19

3

Share

Why Won't the Mistra Start?

The reason why the Mistra won't start is due to a malfunction in the ignition system or fuel supply system. Here are the specific causes: Fuel supply malfunction: Clean the fuel filter screen and the filtering part of the system, and replace it if necessary. If it's the ignition system, check if the spark plugs have severe carbon buildup, whether the ignition voltage is sufficient, and note that spark plugs also have a usage cycle—replace them when they reach the end of their cycle. Ignition malfunction: If the car won't start but the headlights turn on normally, the issue is likely caused by a short circuit in the motor excitation coil. It is recommended to replace the motor magnetic switch.

14

3

Share

What are the methods for mode switching in Corolla?

There are two methods for mode switching in Corolla: one is automatic switching by the car, and the other is manual switching by the driver. Manual switching steps: Start the car, press the brake, shift the transmission to D gear, move the gear lever to the left to switch to manual mode. Push up to upshift and pull down to downshift. Typically, you can push up at 2000-3000 RPM to ensure low fuel consumption. When more power is needed or acceleration is insufficient, pull down to downshift, increasing the RPM to enhance the car's power. Automatic switching: No operation is needed; the car will automatically switch to automatic mode after driving for a while.

9

0

Share

What is the WEY model?

What is the actual 0-100 km/h acceleration time of the Tiguan 280?

What are the interior features of the BMW X2?

What causes the Audi Q5 system to run lean at idle?

What Maintenance Should Be Done at 80,000 Kilometers for a Sedan?

Why Won't the Mistra Start?

What are the methods for mode switching in Corolla?

What is the reason for the failure of the Baojun 510 electronic steering lock to lock?

Does the 2020 Tharu have a particulate filter?

What is the ground clearance of the 2021 RAV4?

What is the reason for the reduced ground clearance of the 2021 Q5L?