What is the WEY car?

1 Answers
EmmanuelRose
07/30/25 9:05am
WEY is the Wey brand. This car is a Chinese luxury SUV brand, with product lines including the VV7, VV6, VV5, and VV7 PHEV new energy series models. Taking the VV7 as an example: 1. In terms of body dimensions. The exterior dimensions of the car are 4760mm in length, 1931mm in width, and 1655mm in height, with a wheelbase of 2950mm, and the body structure is a 5-door, 5-seat SUV. 2. In terms of power. The VV7 is equipped with a 2.0T turbocharged engine, paired with a 7-speed dual-clutch transmission, delivering a maximum horsepower of 227, a maximum power of 167 kW, a maximum power speed of 5500 rpm, and a maximum torque of 387 Nm.
Was this review help?
8
3
Share
More Forum Discussions

Can water be added to a car's coolant?

Water can be added to a car's coolant. When the coolant level is below the MIN mark and no coolant is available, water can be used as a temporary substitute. However, using water as a long-term replacement for coolant is not advisable, as prolonged use can lead to scale buildup on the surfaces of the radiator and water jacket, resulting in increasingly poor heat dissipation and making it difficult to clean. The full name of coolant is antifreeze coolant, and its primary function is to maintain the engine within the normal temperature range while also providing antifreeze, anti-boiling, and anti-corrosion effects. Coolant should be used year-round, and it needs to be replaced annually as part of the car's regular maintenance schedule.
1
4
Share

What are the body dimensions of the Audi A6L?

Taking the Audi A6L 2021 45TFSI Premium Dynamic model as an example, its body dimensions are: length 5050mm, width 1886mm, height 1475mm, wheelbase 3024mm, minimum ground clearance 117mm, fuel tank capacity 73l, luggage compartment capacity 430l, and the drive system is front-wheel drive. In terms of power, it is equipped with a 2.0t turbocharged engine with a maximum power of 165kw and a maximum torque of 350nm, matched with a 7-speed dual-clutch transmission. For the suspension, both the front and rear suspensions of this car use a five-link independent suspension.
9
5
Share

What are the reasons for uneven tire pressure?

The reasons for uneven tire pressure are: each tire experiences slightly different driving conditions, especially in summer when the side exposed to sunlight has a higher temperature, resulting in slightly higher tire pressure. Additionally, the friction coefficient of the ground and minor differences during the inflation of each tire can also lead to uneven tire pressure, which is a common occurrence. As long as the difference is not significant, it is not a problem. Tire pressure monitoring is divided into direct tire pressure monitoring and indirect tire pressure monitoring. The direct tire pressure monitoring system has pressure sensors and transmitters installed on each wheel, which alert the driver when the tire pressure is 25% below the cold tire pressure. The indirect tire pressure warning system relies on calculating the rolling radius of the tire to monitor air pressure.
18
0
Share

What to Do When the Car Key Won't Unlock the Door?

The solutions for when the car key won't unlock the door are: 1. Replace the battery; 2. Use the mechanical key to unlock the door; 3. Inspect and repair the sensor module. The method for replacing the car key battery is: 1. Remove the mechanical key; 2. Insert a flat-head screwdriver into the bottom "open" position and pry up and down; 3. Once a gap appears, use the screwdriver to pry open the key along the gap; 4. Remove the old battery and replace it with a new one. The reasons why the car key won't unlock the door are: 1. Insufficient battery power in the key; 2. The car battery is dead and cannot sense the key; 3. Issues with the sensor key or sensor module.
3
0
Share

Why won't the steering wheel of my newly purchased car return to center automatically?

Newly purchased car's steering wheel should return to center automatically. Auto-centering issue: A minor auto-centering issue means the steering wheel can partially return to center but not completely, which can be resolved through wheel alignment. During wheel alignment, adjusting the parameters of kingpin inclination and caster angle can alter the steering wheel's auto-centering effect. Kingpin inclination primarily affects low-speed auto-centering, while caster angle plays a more significant role in high-speed centering. Causes of the problem: Collision accidents often lead to deviations in wheel alignment and may also cause issues such as vehicle pulling to one side or severe tire wear on one side.
19
5
Share

What Causes Cold Idle Shaking?

Cold idle shaking occurs due to the following reasons: Poor combustion in the cylinders: The fundamental cause of cold idle shaking is poor combustion in the cylinders. Insufficient combustion leads to inadequate power output, resulting in vehicle shaking. Insufficient engine temperature: When the engine temperature is too low, both fuel and lubricating oil fail to reach optimal temperatures. Therefore, during a cold start, more fuel is injected to meet power demands. Larger spark plug gaps result in weaker ignition energy. Poor fuel atomization at low temperatures: At low temperatures, fuel atomization is less effective, requiring higher ignition energy. Over time, spark plug gaps tend to widen, reducing ignition energy and consequently affecting power output, which leads to vehicle shaking.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.