What is the weight of the Toyota Prado?

How long is the lifespan of the Emgrand EV450 battery?

The lifespan of the Emgrand EV450 battery is eight years or 150,000 kilometers. The following are the functions of the car battery: 1. Provide strong current to the starter when starting the engine; 2. Assist the generator in supplying power to electrical equipment when the generator is overloaded; 3. Supply power to electrical equipment when the engine is idling; 4. Protect the car's electrical appliances. Extended content: 1. Taking the 2018 Emgrand EV450 as an example, it belongs to the compact car category, with body dimensions of length 4631mm, width 1789mm, height 1495mm, a wheelbase of 2650mm, and a curb weight of 1595kg. 2. The 2018 Emgrand EV450 has a front suspension of MacPherson independent suspension and a rear suspension of torsion beam non-independent suspension. It is equipped with a permanent magnet synchronous motor, with a maximum power of 120kw and a maximum torque of 250nm, matched with a 1-speed fixed gear ratio transmission.

12

0

Share

What is the actual fuel consumption of the Mitsubishi Pajero?

Mitsubishi Pajero 3.0L manual transmission fuel consumption: 12.0L/100km, 3.0L automatic transmission fuel consumption: 17.0L/100km, 3.0L manual-automatic transmission fuel consumption: 12.0L/100km. Mitsubishi Pajero 3.8L automatic transmission fuel consumption: 17.0L/100km, manual-automatic transmission fuel consumption: 12.0L/100km, 3.8L manual-automatic transmission urban fuel consumption: 17.2L/100km. Below is more information about the Mitsubishi Pajero: 1. The 2019 Mitsubishi Pajero has dimensions of 4900mm in length, 1885mm in width, and 1900mm in height, with a wheelbase of 2780mm, a minimum ground clearance of 235mm, a 3.8L V6 naturally aspirated engine, a five-speed manual-automatic transmission, cruise control, and center and rear dual differential locks. 2. It features a rugged yet refined exterior design, a multi-beam trapezoidal frame structure, and a scientifically designed body structure to ensure strength and reliability on off-road terrain.

6

2

Share

How Many Years Are Vehicles Exempt from Inspection?

New vehicles that meet the regulations can be exempt from inspection for six years, but owners need to apply for the annual inspection compliance mark at the vehicle management office every two years. Conditions for vehicles exempt from inspection for 6 years: The motor vehicle must be a non-commercial vehicle; the vehicle's approved seating capacity must be 9 or fewer. Starting from November 20, 2020, non-commercial small and micro passenger vehicles with 7-9 seats (excluding minivans) are included in the exemption scope; the vehicle type specified on the driving license: sedan (mini, small, medium, large), micro ordinary passenger vehicle, micro off-road passenger vehicle, small ordinary passenger vehicle, small off-road passenger vehicle, small special passenger vehicle; vehicles that have not been registered for more than 4 years since the date of manufacture are excluded; vehicles that meet the above conditions and have not been involved in any traffic accidents causing casualties during the exemption period. Content of the annual inspection: Check whether the engine, chassis, body, and their attachments are clean, complete, and effective, whether the paint surface is uniform and aesthetically pleasing, whether the main assemblies have been replaced, and whether they match the initial inspection records; Test whether the vehicle's braking performance, steering control, lighting, exhaust, and other safety performances comply with the requirements of the "Technical Conditions for Safe Operation of Motor Vehicles"; Check whether the vehicle has been modified, remodeled, or altered, whether the driving license, license plate, and all registered vehicle records match the actual condition of the vehicle, whether there are any changes, and whether approval and modification procedures have been completed; Check whether the license plate, driving license, and the enlarged license plate characters printed on the vehicle are damaged, altered, or unclear, and whether they need to be replaced; For large vehicles, check whether the unit name or the name of the street, township, or town where the vehicle is located and the number of passengers allowed in the cab are printed in Chinese imitation Song font on both sides of the door as required; For trucks, check whether the rear tailgate (including the trailer's rear tailgate) exterior is printed with the vehicle number enlarged 2~3 times as required, and whether the word "individual" is printed on both sides of the door for individually or jointly owned vehicles; the characters must be clear, and unit codes or other patterns are not allowed (special circumstances require approval from the vehicle management office).

12

3

Share

Where to Find the Engine Number and Chassis Number of a Motor Vehicle?

The engine number is generally located on the outer surface of the engine block, on the vehicle's nameplate, or on the nameplate inside the engine compartment. The simplest and most direct method is to check the vehicle's administrative green book or the vehicle's registration certificate. The engine number is like a person's ID number, representing each vehicle. It contains very important information about the vehicle. The chassis number is stamped on the vehicle's frame. The specific location varies by manufacturer, so you can refer to your vehicle's manual. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, industry or company practices, and the attributes of the engine. It represents information such as the manufacturer, specifications, performance, features, technology, purpose, and production batch of the engine, including fuel type, number of cylinders, displacement, and static braking power. Engines installed in passenger cars or multi-purpose vehicles are required to display the professional manufacturer, model, and production number. The chassis number is a commonly used term, with the professional term being the Vehicle Identification Number (VIN). It is a unique code assigned by the manufacturer to identify a vehicle. The VIN consists of 17 alphanumeric characters and is also known as the 17-digit identification code, chassis number, or 17-digit number. The combination of the vehicle identification code ensures that no two vehicles of the same model will have the same number within 30 years, providing a unique identifier for each vehicle. Therefore, it can be referred to as the "vehicle's ID card." Common locations include the registration certificate and the lower left side of the front windshield. It's important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's lineup, and multiple engines can share the same model. The engine number, however, is the production number of the engine, with each engine having a unique number. Structure of the Engine Number: Prefix: Includes the product series code, generation symbol, and regional or company code. Manufacturers can choose appropriate letters as needed, but these must be approved and recorded by the industry standardization unit. Middle Section: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Suffix: Comprises symbols for structural features and usage characteristics. Tail Section: A distinguishing symbol. When differentiation is needed due to improvements or other reasons within the same series, the manufacturer selects an appropriate symbol. The suffix and tail can be separated by a hyphen. The chassis number consists of 17 characters, divided into three parts. Part 1: WMI—World Manufacturer Identifier (positions 1–3); Part 2: VDS—Vehicle Descriptor Section (positions 4–9); Part 3: VIS—Vehicle Indicator Section (positions 10–17).

5

4

Share

What is the MIIT fuel consumption of the Cadillac XT5?

The Cadillac XT5 currently has 6 models on sale. Among them, the Cadillac XT5 2022 2.0T Four-Wheel Drive Fashion, Premium, Luxury, and Platinum models, equipped with a 237-horsepower engine, have an NEDC fuel consumption of 8.3L per 100km. The Cadillac XT5 2022 2.0T Two-Wheel Drive Luxury and Fashion models, also equipped with a 237-horsepower engine, have an NEDC fuel consumption of 8L per 100km. The fuel tank capacity varies among different models of the Cadillac XT5. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 237-horsepower engine and an 82L fuel tank, the distance is 82/8.3*100=988km. For models equipped with a 237-horsepower engine and a 73L fuel tank, the distance is 73/8*100=913km. Vehicle fuel consumption is directly influenced by five main factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption include: Driving habits: Aggressive driving behaviors such as rapid acceleration, frequent overtaking, and not easing off the throttle before stopping at traffic lights can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger engines typically produce more power and require more gasoline to operate. Heavier vehicles also tend to have higher fuel consumption due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Headwinds or driving on windy days increase vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more fuel for combustion, which increases fuel consumption. Additionally, in cold temperatures, the engine control unit may operate at higher RPMs to warm up the engine, further increasing fuel consumption.

8

3

Share

How to Replace the Key Battery for Nissan Tiida?

Here are the steps to replace the key battery for Nissan Tiida: 1. Remove the spare mechanical key. 2. Pry open the key shell along the gap. 3. Take out the old battery and replace it with a new one. Below is some related information about Nissan Tiida keys: 1. The battery life in car remote keys is about 3 years. When the battery runs out, you need to open the key shell to replace it. 2. The Tiida key operates through coil induction. During the unlocking process, the vehicle's RF transceiver verifies whether the key matches to determine if the engine can be safely started.

20

2

Share

What is the weight of the Toyota Prado?

How long is the lifespan of the Emgrand EV450 battery?

What is the actual fuel consumption of the Mitsubishi Pajero?

How Many Years Are Vehicles Exempt from Inspection?

Where to Find the Engine Number and Chassis Number of a Motor Vehicle?

What is the MIIT fuel consumption of the Cadillac XT5?

How to Replace the Key Battery for Nissan Tiida?

How to Adjust the Steering Wheel to the Right Position?

Which light is the brake light at the rear of the car?

What Causes the BMW 5 Series to Shake?

Which region does the license plate number Lu C belong to?