What is the weight of the T-Roc?

What are the differences between rear-wheel drive and four-wheel drive in the BMW 3 Series?

The difference between four-wheel drive and rear-wheel drive lies in the number of driven wheels and handling characteristics. Here is some relevant knowledge about four-wheel drive systems: Definition of four-wheel drive system: Four-wheel drive means that all four wheels of the car can receive driving force. In this way, the engine's power is distributed to all four wheels, making it less likely for the wheels to slip when encountering poor road conditions, and significantly improving the car's off-road capability. Four-wheel drive systems are mainly divided into two categories: part-time four-wheel drive and full-time four-wheel drive. Classification of four-wheel drive systems: There are three common types of four-wheel drive systems in cars: on-demand four-wheel drive, full-time four-wheel drive, and part-time four-wheel drive. Full-time four-wheel drive systems are often found in some luxury SUVs and high-performance sedans. Cars equipped with full-time four-wheel drive systems have power distributed to all four wheels at all times. This type of four-wheel drive system can enhance the mechanical grip of the wheels. Part-time four-wheel drive systems are often seen in some rugged off-road vehicles. Cars equipped with part-time four-wheel drive systems have three modes: high-range four-wheel drive, low-range four-wheel drive, and high-range two-wheel drive.

3

0

Share

How many years is the Baojun 730 exempt from inspection?

After the new regulations, the Baojun 730 is classified as a vehicle exempt from inspection for 6 years. The new regulations have expanded the scope of motor vehicle inspection exemptions. In addition to the existing exemption for non-operational small and micro passenger vehicles with 6 seats or fewer within 6 years, the exemption now also includes non-operational small and micro passenger vehicles with 7 to 9 seats (excluding minivans) within 6 years. Non-operational passenger cars: New vehicles within 6 years are exempt from on-site inspection, but must apply for an inspection mark every two years. Eligible private cars registered after September 2012 can enjoy this exemption policy; vehicles aged 6 to 15 years must undergo on-site inspection once a year, while those over 15 years must undergo inspection every six months. Operational passenger vehicles: Must be inspected once a year within 5 years; those over 5 years must be inspected every 6 months. Trucks and large or medium-sized non-operational passenger vehicles: Must be inspected once a year within 10 years; those over 10 years must be inspected every 6 months.

17

3

Share

Can the rear shock absorber of Zongshen WEEK8 be adjusted?

Zongshen WEEK8 rear shock absorber can be adjusted. Classification of shock absorbers: From the perspective of damping materials, there are mainly two types: hydraulic and pneumatic, and there is also a variable damping shock absorber. Function of shock absorbers: Shock absorbers are mainly used to suppress the oscillation after the spring absorbs vibration and rebounds, as well as the impact from the road surface. When passing through uneven road surfaces, although the shock-absorbing spring can filter the vibration of the road surface, the spring itself still has reciprocating motion, and the shock absorber is used to suppress this spring jump. If the shock absorber is too soft, the body will jump up and down; if the shock absorber is too hard, it will bring too much resistance, hindering the normal operation of the spring. In the process of modifying the suspension system, a hard shock absorber should be matched with a hard spring, and the hardness of the spring is closely related to the weight of the vehicle. Therefore, heavier vehicles generally use harder shock absorbers. The device connected to the vibration-damping crankshaft is used to counteract the torsional vibration of the crankshaft.

10

5

Share

Is it still necessary to install a parking sensor after equipping a car with a reversing camera?

After installing a reversing camera, you can also install a parking sensor. Both are parking assistance devices. The parking sensor can alert the driver to surrounding obstacles through sound or more intuitive displays, while the reversing camera provides a more comprehensive view of the rear situation through real-time images. Precautions for installing a parking sensor: Check the internal structure of the rear bumper for any obstructions, such as the vehicle frame or impact-absorbing foam blocks, and try to avoid installing in these areas. Measure the total distance between the wheel arches at both ends of the rear bumper and mark the precise positions for the four sensors. The spacing between the four sensors should be equal and aligned horizontally. If there is a license plate in the middle, distribute the sensors symmetrically on both sides. The installation surface should not have excessive curvature. Precautions for installing a reversing camera: Ensure all wires are securely wrapped with waterproof tape; the camera must be installed in the correct position; the video cable must be hidden and routed properly; the main unit's installation and wiring should be correct, safe, and aesthetically pleasing.

12

5

Share

How to File an Insurance Claim When You Are Fully Liable for a Rear-End Collision?

When you are fully liable for a rear-end collision, you should immediately contact your insurance company. In this case, the insurance company will cover the compensation. Insurance claim process for rear-end collisions involving police reports and on-site inspections: For minor traffic accidents, first report the incident to the police, then file a claim with the insurance company. Alternatively, you can directly file a claim with the insurance company first. If the collision scene shows no issues, the insurance company can independently determine liability, and traffic police do not need to handle the scene. Additionally, the insurance company's on-site investigator will assess the insurance terms, collect documents such as driver's licenses and ID cards, and other relevant information. Points to note when handling the claim: For minor traffic accidents involving only exterior damage, the insurance company's damage assessor can evaluate the damage on-site and provide compensation for up to three types of damage. For more significant traffic accidents, the vehicle must be taken to a repair shop for disassembly and damage assessment to determine replacement items and labor time. Moreover, the damage assessor must report to higher authorities to verify the reasonableness of the compensation costs.

14

4

Share

Can a Damaged Tire Bead Still Be Used After Installation?

Installing a tire with a damaged bead is not recommended. It is best to replace the damaged tire promptly to avoid potential blowouts. Causes of bead damage: During daily driving, tires are prone to scrapes or punctures, such as rubbing against curbs while parking. This can easily lead to sidewall damage, bulges, or ruptures. A tire bulge occurs when the inner cords of the sidewall break. In such cases, replacing the damaged tire promptly is advisable to prevent blowouts. Tire pressure is crucial to tire longevity—both overinflation and underinflation can shorten its lifespan. Low pressure causes tire deformation, increases sidewall stress, and leads to cracks and excessive flexing. This results in extreme compression forces on the inner layers and tension on the outer layers, exceeding the flex limit. Overheating accelerates rubber aging, weakens the casing ply, and may cause cord breakage. Hazards of a damaged bead: The bead is the inner edge of the tire that seals against the wheel rim. Since the airtightness of tubeless tires relies heavily on the bead's integrity, damage to the bead severely compromises the tire's sealing performance.

11

2

Share

What is the weight of the T-Roc?

What are the differences between rear-wheel drive and four-wheel drive in the BMW 3 Series?

How many years is the Baojun 730 exempt from inspection?

Can the rear shock absorber of Zongshen WEEK8 be adjusted?

Is it still necessary to install a parking sensor after equipping a car with a reversing camera?

How to File an Insurance Claim When You Are Fully Liable for a Rear-End Collision?

Can a Damaged Tire Bead Still Be Used After Installation?

What Are the Requirements for Installing a Charging Pile?

How Long Does It Take to Install a Charging Pile?

Should the Anti-Skid Function Be Turned On or Off in Snowy Weather?

Does Rain the Day After Car Painting Affect the Finish?