What is the weight of the Roewe RX5?

1 Answers
LaMaggie
07/30/25 8:35am
Roewe RX5 two-wheel drive version has a curb weight of 1592 kilograms, while the four-wheel drive version weighs 1680 kilograms. The Roewe RX5 is a compact SUV under the Roewe brand. In terms of body dimensions, the car measures 4556 mm in length, 1855 mm in width, and 1719 mm in height, with a wheelbase of 2700 mm. For power, the Roewe RX5 is equipped with a 1.5-liter turbocharged four-cylinder engine, delivering a maximum power of 124 kW at 5500 rpm and a maximum torque of 250 Nm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
Was this review help?
16
2
Share
More Forum Discussions

Can a Ford Mondeo with a noisy water pump still be driven?

Ford Mondeo with a noisy water pump can still be driven, but it is necessary to go to the repair shop for timely inspection and repair to avoid causing greater hidden dangers. The Ford Mondeo is positioned as a mid-size sedan. In terms of safety, the car is equipped with airbags, including front airbags or curtains, knee airbags, and left and right side curtains for the rear seats. In terms of appearance, the Mondeo's grille is mesh-shaped, and chrome trim is added to the taillights. The length, width, and height of the Mondeo are 4873mm, 1852mm, and 1470mm respectively, with a wheelbase of 2850mm. The engine equipped in the car has a maximum horsepower of 182Ps, a maximum power of 134kW, and a maximum torque of 243Nm.
1
0
Share

Where is the cabin air filter located on the Peugeot 408?

The cabin air filter on the Peugeot 408 is located at the front-left side of the engine compartment. The cabin air filter, also known as the interior filter, is responsible for filtering the air inside the vehicle's cabin. A high-quality cabin air filter can absorb dust particles, reduce respiratory discomfort, minimize irritation for allergy sufferers, enhance driving comfort, and protect the air conditioning cooling system. The Peugeot 408 offers two types of cabin air filters: one without activated carbon and another with activated carbon. The Peugeot 408 measures 4750mm in length, 1820mm in width, and 1488mm in height, with a wheelbase of 2730mm. Its engine delivers a maximum horsepower of 136Ps, a maximum power output of 100kW, and a maximum torque of 230Nm.
20
3
Share

What are the benefits of filling car tires with nitrogen?

The benefits of filling car tires with nitrogen include: 1. Nitrogen is dry and clean, containing no water or oil; 2. As an inert gas, nitrogen does not cause oxidation to tires or corrosion to rims, thereby extending tire service life; 3. Nitrogen has low permeability in tires, maintaining stable tire pressure for extended periods, reducing the risk of blowouts and enhancing driving safety; 4. Stable tire pressure from nitrogen reduces rolling resistance, decreases fuel consumption, and minimizes tire wear; 5. Provides smoother rides on uneven roads with reduced vibration, lower noise transmission, and quieter operation. Nitrogen is chemically very stable and only reacts with hydrogen under high temperature, high pressure, and catalytic conditions to form ammonia.
6
3
Share

What are the steps for adding coolant?

Adding coolant involves the following steps: 1. Tighten the radiator drain switch and fill the radiator with coolant until it overflows. The typical coolant capacity is 4 to 5 liters. 2. Tighten the radiator filler cap. 3. Fill the engine coolant reservoir until the liquid level reaches the full mark. 4. Warm up the engine until the thermostat valve opens. 5. Turn off the engine and wait until the coolant cools down. 6. Remove the radiator filler cap and check the coolant level. Coolant, also known as antifreeze coolant, prevents the engine from freezing in winter and cools the engine when it generates high temperatures during operation, ensuring the vehicle functions properly in various environments.
15
0
Share

What are the road traffic regulations for motorcycles?

Motorcycle road traffic regulations vary in terms of different roads, speed, and safety as follows: 1. Different roads: On roads divided into motor vehicle lanes and non-motor vehicle lanes, motorcycles must drive in the motor vehicle lane, while mopeds should keep to the right within the motor vehicle lane. On roads without a centerline or division between motor vehicle and non-motor vehicle lanes, two-wheeled motorcycles and mopeds should drive on the right side of the road center. On roads without traffic signals, they should proceed under the principle of ensuring safety and smooth traffic. 2. Speed: Motor vehicles on the road must not exceed the maximum speed indicated by speed limit signs. On road sections without speed limit signs, a safe speed should be maintained. Speed should be reduced when driving at night, on dangerous road sections, or encountering sandy roads, hail, rain, snow, fog, ice, etc. 3. Safety: When driving in the same lane, the following vehicle should maintain a safe distance from the vehicle in front to allow for emergency braking. Pay attention to the situation of the vehicle ahead and avoid overtaking easily. When driving, both the driver and passengers must use seat belts as required and wear safety helmets as stipulated. For motorcycle cargo, the height from the ground must not exceed 1.5m, and the length must not exceed 0.2m beyond the vehicle body. For two-wheeled motorcycles, the cargo width must not exceed 0.15m on either side beyond the handlebars, and for three-wheeled motorcycles, the cargo width must not exceed the vehicle body. The rear seat of a motorcycle must not carry children under 12 years old, and mopeds must not carry passengers. When driving a motorcycle, hands must not leave the handlebars, and items must not be hung on the handlebars. Two-wheeled motorcycles must not carry passengers when driving on highways.
19
1
Share

What brand is the engine of the Volkswagen Lavida?

The engine of the Volkswagen Lavida is domestically produced, manufactured in China through a joint venture with German technology, and designed and developed by Shanghai Volkswagen itself. The engine model used in the Volkswagen Lavida is the EA211-DSB, with a maximum horsepower of 150 HP, a maximum power output of 110 KW, a maximum power speed range of 1750-3000 rpm, and a peak torque of 250 N.m. The vehicle's power performance is relatively smooth and has long been known for its low fuel consumption and low maintenance costs. For the daily maintenance of the Volkswagen Lavida's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, the oil should be changed periodically according to usage conditions, and the oil level should be kept moderate. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and the oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing the oil to bypass through the relief valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging the filter and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.