What is the weight of the Roewe i5?

2 Answers
OReese
07/24/25 4:10am
The base model of the Roewe i5 weighs 1185 kg, the mid-range model weighs 1230 kg, and the top model weighs 1270 kg. Roewe i5 Exterior: The Roewe i5 features the Roewe family's rhythmic floating wing wide-body grille design, paired with rectangular front headlights. It also comes with a trapezoidal air intake below. The side profile adopts a dual waistline design, and the rear features a small ducktail spoiler. Additionally, all models come with a limited free upgrade to LED headlights. Roewe i5 Configuration: The upgraded Roewe i5 is equipped with the SuperPilot intelligent active driving assistance system, which integrates six major functions including ACC adaptive cruise control, AEB automatic emergency braking, and LDW lane departure warning. It also comes standard with a TPMS direct tire pressure monitoring system, 360-degree panoramic imaging, and more.
Was this review help?
8
5
Share
Louise
08/10/25 11:48pm
I've been driving the Roewe i5 for a while now, and I feel its weight is around 1,250 kg, which can vary depending on the configuration. For example, the manual transmission version might be just over 1,200 kg, while the automatic transmission version is close to 1,300 kg. Weight affects the driving experience—like when I'm often stuck in city traffic, a heavier body feels more stable and doesn't feel as floaty at high speeds as lighter cars do. In terms of fuel consumption, a heavier car might use a bit more fuel, but it offers higher safety and better grip when cornering. The body materials use lightweight design, balancing performance and efficiency. Compared to other cars like the Volkswagen Lavida at around 1,300 kg, the Roewe i5 isn't too heavy, making it suitable for daily commuting. When buying a car, check the manual specifications to ensure you choose the right configuration, avoiding difficulties with parking or uphill driving.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

Where is the crankshaft position sensor installed?

The crankshaft position sensor is installed either inside the vehicle's distributor or near the crankshaft pulley. The working principle of the crankshaft position sensor is as follows: 1. The crankshaft position sensor is mounted on the flywheel and uses pulse signals to detect the crankshaft position, determining the engine speed and the relative position of the pistons during crankshaft rotation; 2. The engine control unit utilizes the information provided by the crankshaft position sensor to generate ignition signals and injection pulses, which are then sent to the ignition coil and fuel injector respectively. Types of crankshaft position sensors include: magnetic induction, Hall effect, and optical. The functions of the crankshaft position sensor are: 1. To determine the crankshaft's rotation angle and the engine's speed; 2. The crankshaft position sensor works in conjunction with the camshaft position sensor to determine the engine's ignition timing.
17
5
Share

What is the suitable tire pressure for high-speed driving in summer?

Summer high-speed driving tire pressure is suitable at around 2.3 to 2.5 bar. Tire pressure refers to the air pressure inside the tire, and the methods for checking it include: 1. Measurement through instruments; 2. Visual tire pressure method; 3. Consulting 4S store staff. The relationship between tire pressure and car performance is: 1. Tire pressure is an indicator of the car's load capacity, the higher the pressure, the greater the load capacity; 2. Tire pressure has a significant impact on the rolling resistance coefficient, which increases rapidly when the pressure decreases; 3. The tire adopts an inflation method, improving ride comfort; 4. Appropriately reducing tire pressure can increase tire deformation, enlarge the contact area with the ground, enhance adhesion, and ensure the car has good braking performance.
1
2
Share

How to Check the Car Odometer?

To check the car odometer: 1. The upper number displays the total mileage; 2. The lower number shows the trip mileage. To reset the car odometer: 1. Press the black button next to the dashboard; 2. Remove the dashboard and its internal components, then adjust the mileage gear with a tool. The odometer consists of a speedometer and a mileage counter, located directly in front of the driver's position. Methods to verify mileage when buying a car include: 1. Check the car's production date; 2. Inspect tire wear; 3. Examine the interior; 4. Listen for unusual sounds; 5. Test drive the vehicle.
7
3
Share

What are the reversing techniques without a rearview camera?

The following are reversing techniques without a rearview camera: 1. If there is no rearview camera, you need to use the rearview mirrors to judge whether there are obstacles behind the vehicle and the distance to them while reversing. 2. When reversing, accurately judge the posture of the car body and the distance to the obstacles behind. 3. If you want the rear of the car to move to the left, turn the steering wheel to the left. If you want the rear of the car to move to the right, turn the steering wheel to the right. 4. If you want the front of the car to move to the left, turn the steering wheel to the right. If you want the front of the car to move to the right, turn the steering wheel to the left. The techniques for using rearview mirrors while reversing are as follows: 1. When reversing, you can lower the rearview mirror on this side by 15 degrees to make it easier to observe the ground conditions at the rear of the vehicle. 2. The rearview mirror on the driver's side is a flat mirror, which provides a relatively small field of view but a more realistic sense of distance. Usually, the scenery in the mirror will appear smaller than when viewed directly, and judging through positional relationships and changes in position (distance) is a trick when using the mirror. 3. Before reversing, first check the situation behind the car, estimate the reversing route, and determine whether the front of the car will hit any obstacles. Try not to press the accelerator while reversing, and control the speed to avoid going too fast. 4. According to the needs of the rear movement direction, use your left hand to turn the steering wheel: if the rear needs to move to the right rear, turn the steering wheel to the right; otherwise, turn it to the left. 5. Do not keep looking behind the car during the reversing process. Under the premise of ensuring safety behind the car, you need to observe the left and right rearview mirrors from time to time, pay attention to the distance between obstacles and the car body, and use the steering wheel to correct the position of the car body while reversing accordingly. 6. Adjust the left rearview mirror. The correct position for the left rearview mirror is to place the distant horizon in the center when adjusting the up and down positions, and adjust the left and right positions so that the car body occupies 1/4 of the mirror area. 7. Adjust the right rearview mirror. Because the driver's seat is on the left, it is not so easy for the driver to grasp the situation on the right side of the car. In addition, sometimes there is a need for roadside parking. When adjusting the up and down positions of the right rearview mirror, a larger ground area should be left, accounting for about 2/3 of the mirror area. As for the left and right positions, adjust them so that the car body occupies 1/4 of the mirror area.
15
4
Share

What are the exterior dimensions of the Highlander?

The exterior dimensions of the Highlander are: length 4890mm, width 1925mm, height 1720mm, with a wheelbase of 2790mm, a fuel tank capacity of 72.5 liters, and a curb weight of 1910kg. The body structure is a 5-door, 5-seat SUV. The Highlander is equipped with a 2.0T turbocharged engine, delivering a maximum power of 162kW at 5200-5600 rpm, and a maximum torque of 350Nm at 1800-4000 rpm. It is paired with a 6-speed automatic transmission.
1
1
Share

Where is the Vehicle Identification Number (VIN) located?

The Vehicle Identification Number (VIN) is typically located in the engine compartment, on the left side of the dashboard, or at the lower left corner of the windshield. The VIN is a unique code consisting of seventeen letters and numbers that identifies the vehicle's manufacturer, engine, chassis number, and other specifications. The meaning of the VIN is divided into the following parts: 1. The first character represents the country or region of manufacture; 2. The second character indicates the manufacturer code; 3. The third character denotes the vehicle type code; 4. Characters 4 to 8 represent vehicle features; 5. The ninth character is a check digit; 6. The tenth character indicates the model year; 7. The eleventh character specifies the assembly plant; 8. Characters 12 to 17 represent the sequential production number.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.