What is the weight of the Mercedes-Benz GLE in kilograms?

1 Answers
VonJoanna
07/29/25 8:56pm
Taking the Mercedes-Benz GLE400 as an example, the vehicle weight is 2285KG. The model introduction of the Mercedes-Benz GLE is as follows: Exterior: The new car adopts Mercedes-Benz's latest family-style front fascia design. The grille features a dual-horizontal slat design paired with a large-sized logo, and the front bumper design is quite stylish and dynamic. Additionally, the rear of the Mercedes-Benz GLE features a dual-exhaust pipe design, giving the overall appearance a fashionable and premium feel. Interior: The Mercedes-Benz GLE continues the family-style design language, with a wide and solid dashboard that runs across the cabin. The dark color scheme, complemented by metal and leather accents, exudes a sense of luxury. The new car comes with Mercedes-Benz's classic three-spoke steering wheel wrapped in leather, integrating multifunction buttons for vehicle information, multimedia system, Bluetooth calling, and more. Powertrain: The GLE320 4MATIC, GLE400 4MATIC, and GLE450 AMG 4MATIC models are equipped with a 3.0L twin-turbocharged engine, while the AMG GLE63 4MATIC model features a 5.5L twin-turbocharged engine. In terms of the transmission system, all models are paired with a 9-speed automatic transmission. The curb weight of the car is introduced as follows: The fully equipped mass of the car, including lubricants, fuel, onboard tools, spare tire, and all other equipment. The curb weight of a car is essentially its own weight, defined as the dry mass plus coolant, fuel (at least 90% of the tank capacity), spare wheel, and onboard accessories. Dry mass refers to the mass of the car equipped only with the body, all electrical devices, and the complete vehicle necessary for normal operation. Curb weight is the empty weight of the car ready to drive under normal conditions, without passengers (including the driver) or cargo. The curb weight of a car is also an important factor affecting fuel consumption, as fuel consumption is directly proportional to curb weight—the heavier the car, the higher the fuel consumption. Of course, a lower curb weight isn't always better, as a heavier car offers better stability, especially during sharp turns and sudden braking, where its advantages are quite evident.
Was this review help?
6
2
Share
More Forum Discussions

How Early Can a Vehicle Inspection Be Conducted?

You can conduct the annual inspection up to 60 days in advance. Here is more relevant information: 1. Vehicle inspection types: (1) The first type: Small and micro non-operational passenger vehicles (excluding minivans and vehicles with 7 or more seats) are exempt from on-site inspection within 6 years. Although exempt from on-site inspection, a regular inspection label must be obtained every 2 years. (2) The second type: For vehicles over 6 years old, an annual inspection is required. For vehicles over 15 years old, a semi-annual inspection is required. (3) Operational passenger vehicles require an annual inspection within 5 years. For vehicles over 5 years old, a semi-annual inspection is required. Trucks and large or medium-sized non-operational passenger vehicles require an annual inspection within 10 years. For vehicles over 10 years old, a semi-annual inspection is required. 2. Materials required for annual inspection: Please bring the original and copy of the vehicle registration certificate, a warning triangle, and a valid compulsory traffic insurance policy when conducting the inspection.
15
5
Share

What's the Difference Between Body Repair and Painting at a 4S Shop and Outside?

Generally speaking, 4S shops have stronger comprehensive capabilities, such as more complete equipment, better paint quality, overall higher operator proficiency, and higher reliability. Here are some precautions after gasoline painting: 1. Pay attention to cleaning after painting: Try not to use water other than soft water for cleaning, including hot water, alkaline water, and water with high hardness, as these components can damage the paint. If hard water is used to clean the vehicle, traces will be left on the paint surface after drying. 2. Do not expose the car to strong sunlight: This can affect the car's paint surface, thereby accelerating the aging process. 3. Do not use high-pressure water flow to rinse the car body: If there is hard dirt on the car, it can be soaked with water first and then rinsed with water. Pay attention to the water flow method; dispersed water flow should be used for cleaning, as excessive water pressure can also damage the car's paint surface. 4. Use stain removers: If there are stubborn stains on the car body, different types of stain removers should be selected. If there are dead insects or other plant and animal juices on the car body, they should be soaked with soapy water first; then cleaned with a water-soaked sponge.
5
1
Share

What does the exclamation mark symbol mean?

The exclamation mark symbol represents the brake system warning light. When an exclamation mark appears on the dashboard: When the exclamation mark warning light appears on the car dashboard, it is a general fault indicator light. This exclamation mark is the information center indicator light. When it lights up, it indicates that the system has detected a fault or abnormal condition. Specific details can be viewed on the multifunction display information screen on the right side of the combination instrument panel. When a fault occurs in the vehicle, the dashboard usually lights up a warning light, which can be either yellow or red. Warning lights are divided into yellow and red: If the red warning light is on, it indicates that the car's tire pressure is too low, which can easily lead to the risk of a tire blowout. This may be due to tire wear, punctures, or other reasons, and the car should be taken to a 4S shop or repair shop for immediate inspection. The yellow light is the steering system fault light, which shows a steering wheel pattern on the left and an exclamation mark on the right. If it lights up, it indicates a fault in the steering system. The car's steering system is a power steering system that assists in turning the car by external force. Once the fault light comes on, it should be inspected immediately.
5
1
Share

What is the 'cancel' button on the steering wheel?

The 'cancel' button on the steering wheel is generally the control key for cruise control. Concept of 'cancel': The word 'cancel' means to terminate, and this button usually only appears on vehicles equipped with cruise control functionality. After activating cruise control on the highway, you can cancel it by pressing the 'cancel' button or by stepping on the brake pedal. Next to the 'cancel' button, there is typically a 'set' button. Pressing this button will maintain the vehicle's current speed in cruise control, allowing the car to sustain a constant speed without the driver needing to press the accelerator pedal. This feature effectively reduces driver fatigue during long highway drives. How to use the 'cancel' button: When you notice a vehicle ahead while in cruise control, you can press the 'cancel' button in advance to deactivate cruise control. After cancellation, the vehicle will no longer maintain speed automatically, and acceleration/deceleration is entirely returned to the driver's control. If you wish to resume the previous cruising speed, you can press the 'res' button on the steering wheel to restore the cruise speed.
12
4
Share

Which country does Bosch belong to?

Bosch is a company from Germany that manufactures automotive parts, household appliances, power tools, and other products. Here is some extended information about Bosch: 1. Automotive parts manufactured by Bosch: Many cars use Bosch parts, including wipers, generators, oil filters, air filters, cabin air filters, spark plugs, and steel belts for CVT transmissions. 2. Steel belts: Manufacturing steel belts for CVT transmissions is quite challenging, and Bosch has monopolized this technology. Most Japanese manufacturers need to purchase steel belts from Bosch to produce CVT transmissions.
5
5
Share

What Type of Vehicles is Shell 20W-50 Engine Oil Suitable For?

Shell 20W-50 engine oil is not a matter of which brand or type of vehicle it suits, but rather a question of which geographical regions it is appropriate for. Introduction to engine oil grades: The viscosity of lubricating oils is often indicated using SAE (Society of Automotive Engineers) grade classifications. SAE is the abbreviation for "Society of Automotive Engineers" in English. For example: SAE 15W-40, SAE 5W-40. The "W" stands for winter, and the smaller the number before it, the better the oil's low-temperature fluidity, indicating it can be used in lower environmental temperatures and provides better engine protection during cold starts. The number after the "W" (following the hyphen) represents the oil's high-temperature resistance; a higher number indicates better protection under high temperatures. Hazards of incorrectly using 20W-50 engine oil: Using this viscosity of oil in northern winters can lead to poor fluidity and weak cold-start performance, potentially causing the engine to fail to start. From the grade, 20W oil has a freezing point of -15°C, and this type of oil has high viscosity and poor fluidity in low temperatures. The "50" indicates that this oil is resistant to high temperatures. Therefore, it is suitable for use in tropical, subtropical regions, or during hot seasons in northern areas.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.