What is the weight of the Jetour X90 in tons?

1 Answers
VonLondyn
07/30/25 12:57am
The curb weight of the Jetour X90 is approximately 1.55 tons. Below are the detailed specifications of the Jetour X90: 1. The Jetour X90 is positioned as a comfortable and intelligent six-seater midsize SUV, offering three powertrain combinations across 10 models: 1.5T-6MT/8AT and 1.6TGDI-7DCT. It primarily features a 6-seat layout, with options for 5-seat and 5+2-seat configurations. 2. In terms of powertrain, it provides two engine options: 1.5T and 1.6T. The former delivers a maximum power of 115kW, maximum horsepower of 156PS, and peak torque of 230Nm, paired with a 6-speed dual-clutch transmission. The latter offers a maximum power of 145kW, maximum horsepower of 197PS, and peak torque of 290Nm, matched with a 7-speed dual-clutch transmission.
Was this review help?
18
3
Share
More Forum Discussions

What does the TC indicator on the dashboard mean?

The TC indicator stands for Traction Control system. When the TC light is on, it indicates that the traction control system is either turned off or there is a malfunction in the system. If you have ruled out the possibility of accidentally turning off the traction control switch, it means there is a fault in the vehicle's traction control system, and you should take it to a repair shop for diagnosis and repair. 1. How TC works: The TC system operates by using an electronic throttle control device to replace the mechanical connection between the accelerator pedal and the throttle. Sensors transmit the accelerator pedal's information to the ECU, which then generates a control voltage signal. The motor adjusts the throttle based on this signal to reduce the throttle opening and control wheel slip. 2. Causes of TC malfunction: (1) Solenoid valve failure; (2) Dirty engine oil clogging the solenoid valve filter; (3) Wear on the actuator gear and impeller causing oil pressure leakage and triggering an alarm; (4) Dirty throttle body with an opening reaching 20%, leading the engine computer to misjudge a TC fault.
10
0
Share

What are the causes of BYD's one-key start failure?

Here are the reasons for BYD's one-key start failure: 1. Signal interference: Frequently placing the car key near electronic devices such as mobile phones, computers, or televisions can cause interference with the low-intensity radio waves in the key. Alternatively, strong radio waves from nearby sources like TV towers, airports, or power plants can also lead to a "malfunction" in the one-key start system. 2. Key fob battery depletion: If the key exhibits symptoms like reduced remote control distance or decreased sensitivity, it is a sign that the key fob battery is running low. In a depleted state, the one-key start function will not work properly, and the battery should be replaced as soon as possible. 3. Vehicle malfunction: In extreme cases such as fuel system issues, dead battery, or short circuits in electronic components, the vehicle should be handed over to a 4S dealership for inspection and repair.
16
3
Share

What are the new regulations for the annual review of a Class A driver's license with demerit points?

A Class A driver's license requires an annual review. The review must be conducted within 30 days after the end of the demerit point cycle at the traffic management department of the public security authority. However, if there are no demerit point records for violating traffic safety laws and regulations during a demerit point cycle, the driver can be exempted from the annual review for that cycle. If a driver fails to attend the required review, they can make up for it within three years. If a Class A driver's license is not reviewed for more than three years, it will be downgraded, with the maximum downgrade being to a Class C1 license. Preparation before the driver's license review: Handling violations: Before the review, all traffic violations must be resolved, and fines must be paid in full; otherwise, the review cannot proceed. Medical examination: A "Driver's Physical Condition Certificate" must be submitted during the review. Additionally, this certificate must be issued by a medical institution at or above the county level or a military medical institution at or above the regimental level. ID photo: A recent 1-inch, white-background, color, bareheaded front-facing photo taken within the last six months must be submitted for the review. If not available, it should be taken promptly.
19
2
Share

What Causes the Airbag Indicator Light to Illuminate?

Introduction to the reasons for the airbag indicator light illuminating in the car: The airbag warning light may come on during engine self-check. The indicator light will illuminate when starting the car, but it will turn off after the self-check is completed, typically within about 5 seconds. This is a normal phenomenon. If the light does not turn off, it indicates a fault. Below are specific details about related content: 1. Situations requiring repair: If the airbag indicator light continues to flash or remains lit after 6-8 seconds of vehicle startup, or if the airbag indicator light flashes for 5 seconds and then stays lit while the vehicle is in operation, these two scenarios suggest that the airbag system may have a malfunction. In such cases, it is advisable to visit a 4S shop for inspection and repair as soon as possible. 2. Components: The airbag system generally consists of sensors, a microprocessor, an electronic control unit, an airbag cover and support ring, the airbag itself, and an airbag module, among others. If the warning light is on, it may indicate damage to one of these components. 3. Maintenance cycle: The quality of airbags may become unreliable after 8-10 years of use, so it is recommended to perform maintenance every 10,000 to 20,000 kilometers.
9
2
Share

Do I need to change my photo for a 6-year license renewal?

For a 6-year license renewal, you need to change your photo. A recent one-inch color photo with a white background and no hat must be used for the driver's license renewal. Here are the specific details about the renewal process: 1. Processing Location: The driver's license renewal can be processed at the vehicle management office where the original driver's license was issued or at any other vehicle management office outside the original issuing location. 2. Required Materials: When applying for a driver's license renewal, you need to fill out an application form and submit the following documents: the identity proof of the motor vehicle driver, the original driver's license, and a medical certificate issued by a county-level or higher medical institution or a military medical institution at the regiment level or above. For those applying for a special small automatic passenger vehicle for the disabled, a medical certificate issued by a specialized medical institution designated by the provincial health authority is required.
7
3
Share

What Type of Engine Oil is Suitable for the Hyundai Elantra?

The original engine oil for the Hyundai Elantra is produced by Mobis, a subsidiary of Hyundai, and is an SL-grade API-SM/GF-4 SAE-5W-20 semi-synthetic oil. For later maintenance and oil changes, you can choose fully synthetic oils with a grade of 5W-30 or higher, such as Castrol Edge 0W-40, Castrol GTX, Castrol Magnatec, Mobil Super 2000, Shell, and other brands. The maintenance manual requires engine oil with a grade of 5W-30 that meets the A5B5 certification. Any oil that meets the above specifications can be used. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value indicates better viscosity retention at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Hyundai Elantra is as follows: Wait for the engine temperature to drop and allow the oil to flow back into the oil pan; Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until no more oil flows out. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the engine valve cover filler port, typically filling about three-quarters of the oil bottle; Start the engine and let it run for 5 minutes, checking for any leaks around the drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the dipstick to check that the engine oil level is within the standard range.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.