···
Log in / Register

What is the weight of the GAC Trumpchi GA4 body?

3 Answers
LeviRose
07/30/25 12:06am
GAC Trumpchi GS4 has a curb weight ranging approximately between 1,450-1,475 kilograms, with variations of about 30kg depending on different configurations. This model is quite fuel-consuming, with its fuel consumption being over half higher compared to other models - roughly 1.5 times that of other vehicles. This wasn't fully considered initially, but after actual driving, one realizes that while the car itself isn't expensive, the fuel costs are. Therefore, for commuting or personal use with one or two people, it's advisable to choose a smaller, lighter model for long-term benefits. The exterior design is very attractive and satisfying, while the interior is simple and elegant, providing comfortable seating. GAC Trumpchi has comprehensively upgraded its quality, driving pleasure, and services, allowing you to master tomorrow's technology and embark on a better life. It has consecutively won the "eight consecutive championships" in J.D. Power China Initial Quality Study (IQS) as the champion among Chinese brands in the mainstream vehicle market, and has topped the CASI After-Sales Satisfaction Survey for independent brands for four consecutive years.
Was this review help?
5
5
Share
LaAlyssa
08/16/25 4:01am
When helping a friend inspect a car before, I specifically checked the data for this model. The weight details of the Trumpchi GA4 are as follows: the base manual transmission version has a curb weight of around 1,250 kg, while the 1.5L automatic version is slightly heavier, approximately 1,320 kg. In my opinion, this weight is considered medium in the A-segment, especially since the body shell uses a lot of high-strength steel, and the chassis components are quite solid. However, weight has a direct impact on fuel consumption. Based on my actual tests in city driving, the 1.3T version can save nearly 0.8 liters of fuel per 100 kilometers compared to the 1.5L version.
Was this review help?
18
3
Share
Expand All
Lindsay
10/19/25 5:58am
Last year, I drove a GA4 test vehicle for half a year and specifically checked the manual at that time: the curb weight of the 2023 automatic luxury edition is 1,345 kg. This weight design is quite meticulous, with a front MacPherson strut and rear torsion beam suspension setup, ensuring both handling and weight control. On the highway, the body stability felt significantly better than some Japanese cars weighing 1,250 kg. I recommend checking the label inside the fuel filler cap when inspecting the car, as the weight indicated there is the most accurate.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

Is it allowed to make a U-turn at a double solid yellow line?

U-turns are not allowed at double solid yellow lines. Double solid yellow lines indicate that overtaking and U-turns are prohibited for vehicles. Making a U-turn at a double yellow line will result in a 3-point penalty and a fine. Other situations where U-turns are prohibited include: U-turns are prohibited where there is a 'No U-turn' sign or 'No Left Turn' sign: If there is a sign prohibiting U-turns, then U-turns are not allowed at that intersection. The action of making a U-turn is an extension of a left turn, so if there is a sign prohibiting left turns at an intersection, U-turns are also prohibited there. U-turns are prohibited when there is no left-turn lane: Even if you are in the leftmost lane, if there is no sign permitting left turns, U-turns are not allowed. U-turns are prohibited in the second left-turn lane: When a vehicle is in the second left-turn lane, it cannot make a U-turn. In the absence of any signs, vehicles can only make U-turns in the innermost left-turn lane. U-turns are prohibited on highways: Making a U-turn by crossing the central divider on a highway is illegal and will result in a fine and a 12-point penalty. If you miss an exit on the highway, continue to the next exit to leave the highway, and never attempt an illegal U-turn.
4
2
Share

What to Do When the Wuling Zhiguang Car Key is Locked Inside the Vehicle?

Solutions for when the key is locked inside the car are as follows: 1. Spare key: When the main key is accidentally locked inside the car, try to retrieve the spare key. This is the simplest and least costly method. 2. Break the window: It is recommended to choose the front door window, as replacing it is easier, has less impact on the seal, and the price is acceptable. 3. Locksmith company: Contact a locksmith company to avoid damaging the vehicle itself. 4. Call 110: For safety reasons, it is advised to directly call the local 110 to seek police assistance in recommending a locksmith company, avoiding illegal locksmith companies with malicious intent.
19
1
Share

How to Replace the Battery in an Older Mercedes-Benz G63 AMG Key?

The back of the older Mercedes-Benz G63 AMG key has a button. Press this button and slide the back cover forward to open the key. The battery is located in the adjacent slot. Be sure to note the battery model for the key. Most Mercedes key batteries are model 3V CR2025. After opening the slot, remove the old battery and replace it with a new one. Here is more information about Mercedes keys: 1. Mercedes has used three generations of car keys over the past twenty years. The key design is not related to the vehicle model or series. For example, keys for C-Class, E-Class, and S-Class are essentially the same within the same era, and the battery replacement method is also similar. 2. For Mercedes keys from 2006 to 2013, first flip open the tab at the rear end of the key to remove the mechanical key. Insert the mechanical key into the slot where the tab was and apply slight pressure to pop open the back cover. Then remove the depleted old battery, replace it with a new one, and close the back cover.
15
2
Share

What does a steering wheel with an exclamation mark mean in a car?

An exclamation mark appearing on the steering wheel indicates the Electronic Power Steering (EPS) warning light, which should disappear immediately after the engine starts. The Electric Power Steering (EPS) system is a power steering system that directly relies on an electric motor to provide assistive torque. Compared to the traditional Hydraulic Power Steering (HPS) system, the EPS system offers many advantages. The EPS mainly consists of components such as a torque sensor, vehicle speed sensor, electric motor, reduction mechanism, and Electronic Control Unit (ECU). The Electric Power Steering system evolved from the traditional mechanical steering system. It utilizes power generated by an electric motor to assist the driver in steering operations. The system primarily consists of three major parts: signal sensing devices (including torque sensor, steering angle sensor, and vehicle speed sensor), steering assist mechanism (electric motor, clutch, reduction transmission mechanism), and electronic control device. The motor operates only when assistance is needed. When the driver manipulates the steering wheel, the torque and steering angle sensor generates corresponding voltage signals based on the input torque and steering angle. The vehicle speed sensor detects the speed signal, and the control unit issues commands to control the motor's operation based on the voltage and speed signals, thereby generating the required steering assistance.
9
2
Share

How to Park and Turn Off a Mercedes-Benz Car?

To park and turn off a Mercedes-Benz car, shift the gear into P (Park) position and then press the start/stop button to turn off the engine. Relevant details are as follows: 1. The exterior dimensions of the Mercedes-Benz C200L Dynamic Sport Edition are 4784mm in length, 1810mm in width, and 1457mm in height, with a wheelbase of 2920mm. 2. The Mercedes-Benz C200L Dynamic Sport Edition is equipped with a 1.5T 156-horsepower 4-cylinder turbocharged engine and a 9-speed automatic transmission, delivering a maximum power of 115 kW, a maximum torque of 250 Nm, a maximum power speed of 5700 rpm, and a maximum torque range from 1500 to 4000 rpm.
7
1
Share

What is the optimal mileage for the first maintenance of an Audi A6?

The first maintenance for a new Audi A6 is recommended at 5,000 kilometers, followed by subsequent maintenance every 7,500 kilometers. Here is more information about maintenance: 1. Maintenance requires replacing the engine oil, oil filter, and cabin air filter. 2. Engine oil maintenance helps reduce engine wear and provides cooling and lubrication for the engine. 3. The oil filter's role is to filter the engine oil, removing dust and impurities to protect the engine. Its replacement cycle is the same as the engine oil, so it should be replaced together during an oil change. The air filter ensures clean air intake for the engine, and its cleanliness should be checked to determine if replacement is needed. The cabin air filter prevents external dust and odors from entering the vehicle, ensuring a comfortable driving environment.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.