What is the weight of the Ford Focus car?

1 Answers
KyleLee
07/30/25 3:58am
The curb weight of the Ford Focus ranges from 1245 to 1411kg. Here is more information about the Ford Focus: 1. Vehicle dimensions: Taking the 2021 Ford Focus manual version as an example, it belongs to the compact car category with body dimensions of 4647mm in length, 1810mm in width, and 1468mm in height, a wheelbase of 2705mm, and a fuel tank capacity of 53 liters. 2. Powertrain configuration: The 2021 Ford Focus manual version is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 90kW at 6500rpm, a maximum torque of 153Nm at 4500rpm, and is paired with a 6-speed manual transmission.
Was this review help?
8
1
Share
More Forum Discussions

Why Shouldn't Driver's License and Vehicle Registration Be Left in the Car?

Why shouldn't driver's license and vehicle registration be left in the car? The main reason is to prevent criminals from stealing them, which could lead to a series of negative consequences. However, keeping the driver's license and vehicle registration in the car can also be convenient in certain situations, such as when traffic police inspect the vehicle or when the driver commits a traffic violation, as they can be easily provided and presented. Below is some information about electronic driver's licenses: 1. Introduction: The electronic driver's license, commonly known as the "e-license," serves as a supplement to the physical license. In cases where the physical license is not carried, the electronic version can be used for roadside inspections, etc. 2. Driver's License: The full name of the driver's license is the motor vehicle driver's license, also referred to as a "driving license." It is a legal document required for individuals to operate motor vehicles. Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle recklessly could lead to traffic accidents. Generally, individuals without a license are not allowed to drive on the road.
9
4
Share

What is the fuel consumption per 100 kilometers for family cars?

Fuel consumption per 100 kilometers = Fuel consumption (liters) ÷ Distance traveled (kilometers) × 100. The usual calculation method is to fill up the fuel tank when the fuel gauge light comes on, reset the trip odometer to zero, and then record the trip odometer reading when the fuel gauge light comes on again. Divide the amount of fuel added by the distance traveled and multiply by 100 to get the fuel consumption per 100 kilometers. Here are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a major cause of high fuel consumption. Poor cooling performance leads to higher fan speeds and lower temperatures to achieve a cooling effect. 2. Frequent hard braking: Frequent hard braking is a primary reason for high fuel consumption in cars. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive air conditioning in small-displacement cars: For vehicles exposed to the sun, do not turn on the air conditioning immediately after entering. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside. Wait for the vehicle to cool down moderately before turning on the air conditioning.
17
0
Share

What is the Lotus car?

Lotus is a high-performance sports car manufacturer. Lotus Cars, formerly translated as "Lotus Automobile," is a world-renowned producer of sports cars and racing vehicles. Headquartered in Hethel, Norfolk, UK, it was founded by Colin Chapman in 1948. Lotus sports cars are renowned for their pure driving pleasure and lightweight design. Here is some related knowledge about the Lotus factory: The Lotus factory undertakes all the design, development, engineering, and technical improvements for the Lotus series of sports cars and racing vehicles. Additionally, the Lotus factory provides external services including vehicle design, chassis development, powertrain, and other automotive product technologies, and is a world leader in technologies such as chassis design, engine tuning, and control systems.
5
1
Share

Why is the rear shock absorber higher on one side than the other?

This is due to the forward inertia effect when the car brakes. To prevent the front of the car from rubbing against the ground, the shock absorbers are designed to be higher in the front and lower in the rear. Car shock absorbers, also known as car dampers, typically last for about 80,000 kilometers, assuming an average annual driving distance of 20,000 kilometers. Beyond this point, they may become damaged and lose their effectiveness, requiring replacement. Here are some key points to note: 1. Point one: After driving the car on rough roads for about 10 kilometers, stop and touch the outer shell of the shock absorber. If it is not warm enough, it indicates that there is no resistance inside the shock absorber, meaning it is not functioning properly. In this case, adding an appropriate amount of lubricating oil and retesting may help. If the shell becomes warm, it suggests a lack of oil inside the shock absorber. 2. Point two: Press down firmly on the bumper at the front of the car and then release it. If the car bounces two or three times, it indicates that the shock absorber is working well. Thirdly, if the car vibrates excessively when braking suddenly during slow driving, it suggests a problem with the shock absorber.
9
3
Share

What are the dimensions of the Polo hatchback?

The dimensions of the Polo hatchback are a length of 4053mm, a width of 1740mm, and a height of 1449mm, as per official data. The length of the Polo hatchback refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane, touching the foremost and rearmost protruding parts of the vehicle. The width refers to the distance between two parallel planes touching the outermost rigid fixed protruding parts on either side of the vehicle, parallel to the longitudinal symmetry plane. The height refers to the distance between the highest point of the vehicle and the supporting plane. The Polo hatchback is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113PS, a maximum power of 83kW, and a maximum torque of 145Nm, paired with a 5-speed manual transmission. There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include the rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data is to ensure adequate space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
7
3
Share

What are the reasons for high gas consumption in CNG vehicles?

CNG vehicle fuel consumption is related to the selected vehicle model, vehicle condition, and modification technical level. Under the condition of ensuring no gas leakage loss, excessive fuel consumption when using natural gas is related to improper installation and adjustment of the CNG pressure reducer. During the installation of the pressure reducing valve, it is required that the diaphragm plane is perpendicular to the ground; otherwise, the gravity of the diaphragm itself will cause the opening of the three-stage pressure reducing valve to become larger or smaller, affecting fuel consumption. The following are explanations for the related reasons: 1. Driving before the engine reaches operating temperature: The normal operating temperature required by the engine is 800°C to 900°C. In winter, many drivers start driving before the engine reaches the operating temperature, causing insufficient combustion of natural gas, which easily forms carbon deposits and also leads to higher fuel consumption. 2. Idling to warm up the engine: When the engine temperature is below the normal operating temperature, the engine will increase the fuel injection amount and adjust the ignition timing to maintain temperature. 3. Excessive carbon deposits and dirt in the intake tract: Changes in the cross-sectional area of the air passage cause the control unit to be unable to precisely control the idle air intake, resulting in an overly rich or lean mixture, leading to abnormal combustion or engine shaking after starting. 4. Sensors in various parts of the engine: If there are issues, it can also cause the engine ECU to be unable to accurately control the fuel injection amount.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.