What is the weight of the Changan Oshan X7?

1 Answers
LydiaLee
07/28/25 7:55pm
The total weight of the Changan Oshan X7 is 1590 kilograms. Below are the detailed specifications of the Changan Oshan X7: 1. The Changan Oshan X7 is a 5-door, 5-seater compact SUV with body dimensions of 4705mm in length, 1860mm in width, 1720mm in height, and a wheelbase of 2780mm. 2. The Changan Oshan X7 is equipped with a 1.5T turbocharged engine, paired with a 7-speed dual-clutch transmission, delivering a maximum power of 131 kilowatts at 5500 rpm and a maximum torque of 265 Newton-meters at 4500 rpm. It features front-wheel drive. 3. The front suspension uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
Was this review help?
18
1
Share
More Forum Discussions

What Are the Hazards of High Seal Oil Temperature?

High seal oil temperature can lead to a decrease in viscosity, potentially causing leaks and affecting the sealing effectiveness. Causes of Leaks: Oil seals are used to seal mechanical components of the oil, also known as oil rings, which isolate the parts of the driving components that need lubrication from the output components, preventing oil leakage. If the sealing ring is not installed, the sealing edges of the shaft neck are uneven, or the oil seal ages, it can lead to oil leakage in the vehicle. Most oil leaks occur at the front-end oil seal of the engine or the transmission half-shaft seal, typically resulting in seepage leaks. Generally, the engine has a valve cover gasket, engine cylinder gasket, and oil pan gasket. Once these three gaskets wear out, age, or deteriorate, they can cause oil leaks. It is recommended to regularly replace damaged oil seals and gaskets. Sealing Devices: If screws are not tightened properly or the guide wires slip, and if the oil pan screws are not tight enough, the seal between the engine body and the oil pan will degrade, leading to oil pan leaks. The oil pan screw washers are also crucial because they are made of relatively soft material and can easily deform under pressure, so they are recommended as one-time use items.
9
3
Share

What is the typical engine RPM for the Haval H6 while driving?

Haval H6 typically maintains an engine RPM of around 2000 while driving. Relationship between engine RPM and vehicle speed: Engine RPM and vehicle speed do not have a one-to-one correspondence, but generally, higher RPM results in higher speed. This is because the transmission acts as an intermediary—more precisely, it depends on the gear ratio of the transmission. For example, at the same engine RPM, different gears will produce different vehicle speeds. A faster vehicle speed always requires higher engine RPM, but higher engine RPM does not necessarily mean the vehicle is moving faster. Recommended RPM range: Try to utilize the available RPM range effectively. If the RPM limit is 6000, aim to operate within the 3000 to 6000 RPM range, shifting gears frequently and maintaining variable speeds (especially useful for winding mountain roads or highways with smooth traffic but frequent acceleration/deceleration needs).
2
5
Share

What Causes Paint Peeling on the Hood?

Paint peeling on the hood may be caused by prolonged high temperatures in the engine compartment or vehicle friction. Causes of hood paint peeling: Automotive paint and plated components generally have good rust resistance, but areas such as weld points, seams, the engine compartment (due to prolonged high temperatures), and scratched areas are prone to rust. Therefore, after a period of use, the vehicle should undergo necessary rust prevention treatment. Hood precautions: When the engine is at high temperatures, take care to avoid burns from touching the engine. When cleaning other components in the engine compartment, be cautious to prevent cuts from connectors or wires. Do not open the hood when the engine is running. When closing the hood, apply appropriate force—avoid slamming it too hard. Certain engine components must be kept away from water.
2
5
Share

Does the Mercedes-Benz E300L have a lane keeping system?

Mercedes-Benz E300L does not have a lane keeping system. Definition of Lane Keeping System: The Lane Keeping Assist System is a type of intelligent driving assistance system that, based on the Lane Departure Warning System (LDWS), assists the steering system to help the vehicle stay within its lane. While driving, the system uses a camera to identify the lane markings and provides support to keep the vehicle in the lane. How the Lane Keeping System Works: By processing the camera's images, the system determines the vehicle's current position relative to the lane markings, the direction and speed of deviation. When the vehicle approaches the identified boundary line and is about to leave the lane, the system alerts the driver through sound and visual signals.
11
0
Share

Why is the driving comfort of the BMW X3 affected?

The reason for the affected driving comfort of the BMW X3 is low battery voltage. Methods to address low battery voltage: Use a portable charger to recharge the battery. Functions of the battery: Supplies power to the starting system and ignition system during engine startup; provides power to vehicle electrical equipment when the engine is off or idling at low speed; acts as a voltage stabilizer for the entire electrical system; stores excess electrical energy generated by the alternator. Battery maintenance: The battery is most vulnerable to low temperatures. In cold environments, the battery capacity is significantly lower than at normal temperatures. Therefore, timely inspection and maintenance are essential.
10
0
Share

Can You Cross the Line in Curve Driving?

Curve driving does not allow crossing the line, and two vehicles cannot enter the S-curve test simultaneously. Controlling Vehicle Speed: When the vehicle enters the curve driving test area, the first thing to note is to keep the car body straight, pay attention to the position of the front of the car, and try to adjust the vehicle to drive in the middle of the road. It is essential to control the speed of the car and not go too fast. If the speed is too high, it is easy to cross the line, which will result in failing the test. Observing the Diagonal Line: Use the left and right rearview mirrors to align with the left and right lines, always keeping the vehicle centered. Observe the diagonal line: when turning right, use the left corner of the car to align with the right line; when turning left, use the right corner of the car to align with the left line. Follow the line with the car corner.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.