What is the weight of the Changan Oshan X7?

1 Answers
OJocelyn
07/24/25 10:18pm
Changan Oshan X7 has a curb weight ranging from 1900 to 2075 kilograms. It is equipped with a 1.5T engine, delivering a maximum power of 178 horsepower and a peak torque of 265 Nm. The engine is paired with a wet-type 7DCT automatic transmission. The Changan Oshan X7 is the first compact SUV from Changan Oshan. In terms of dimensions, the vehicle measures 4705mm in length, 1860mm in width, and 1720mm in height, with a wheelbase of 2780mm. The new car is based on Changan's global R&D center's new modular MPA2 platform, which supports the development of products with three energy forms: EV, hybrid, and traditional fuel vehicles.
Was this review help?
12
2
Share
More Forum Discussions

Do I Need to Discharge the Car Battery Before Adding Water?

Do I need to discharge the car battery before adding water? The car battery, also known as a storage battery, is a type of battery. The method for charging a car battery is as follows: 1. Turn off the engine and remove the battery; 2. Open the vent caps on the battery; 3. Use the red clamp of the dedicated charger to connect to the battery's positive terminal marked with a plus sign, and the black clamp to connect to the negative terminal marked with a minus sign; 4. Adjust to the 2nd gear and select a 12-volt power source; 5. Plug in the charger, turn on the switch, and start charging. The maintenance methods for a car battery include: 1. Regularly clean the dust and grease from the battery terminals and apply specialized grease to protect the wiring harness; 2. Periodically check the battery's accessories and connecting wires; 3. Minimize the use of electrical devices in the car after turning off the engine; 4. Inspect the car battery through the observation hole and replace it regularly; 5. Start the car periodically if it is not used for an extended period.
8
1
Share

How long does it take to fully charge the WM EX5?

It takes 1 hour and 8 minutes to fully charge the WM EX5. Here are the relevant details: 1. WM EX5 design: The WM EX5 is based on the pure electric AJAX platform for vehicle architecture platform design. Research shows that for every 0.01 reduction in drag coefficient, power consumption decreases by 5%. The WM EX5 adopts VDA high-energy-density square cells, with the battery pack system energy density exceeding 140Wh/kg. 2. WM EX5 battery management system: The WM EX5's battery management system can perform real-time monitoring of the battery pack, battery state estimation, online diagnosis and warning, balanced thermal management, providing users with battery information for driving reference, thereby reducing power consumption and improving the vehicle's range.
19
1
Share

What are the components of the crank connecting rod mechanism?

The crank connecting rod mechanism consists of the engine block group, piston connecting rod group, and crankshaft flywheel group. The details are as follows: 1. The engine block group includes: cylinder block, cylinder head, cylinder gasket, cylinder cover, and oil pan. The engine block group serves as the support frame for the engine, providing the assembly body for the crank connecting rod mechanism, valve train, and other major components of the engine systems. It integrates various mechanisms and systems of the engine into a whole, maintaining necessary interrelationships among them. 2. The piston connecting rod group includes: piston, connecting rod, piston ring, piston pin, connecting rod bearing, connecting rod cap, and connecting rod bolts. This group converts the reciprocating motion of the piston into the rotational motion of the crankshaft, while transforming the force acting on the piston into the torque output by the crankshaft to drive the vehicle's wheels. It acts as the transmission component of the engine, transferring the pressure of combustion gases to the crankshaft, causing it to rotate and output power. 3. The crankshaft flywheel group includes: crankshaft, flywheel, torsional damper, crankshaft main bearing, crankshaft pulley, and timing gear. The crankshaft flywheel group converts the reciprocating motion of the piston into the rotational motion of the crankshaft, outputting torque for vehicle movement and other power-demanding mechanisms. Additionally, it stores energy to overcome resistance during non-power strokes, ensuring smooth engine operation.
8
5
Share

Can Hail Damage a Car?

Yes. Hail falling from a high altitude carries significant potential energy and possesses considerable destructive force, which can cause severe damage to a car's windshield and paint surface. Generally, hailstones the size of lychees are enough to damage a vehicle. In cases of larger hailstones, they can break the car's glass and create dents on the body, leading to significant damage. It is advisable for car owners to take preventive measures in advance to avoid such losses. Methods to protect a car from hail include: 1. Parking the car in a garage or indoor parking lot. 2. Using a car hail protection cover. 3. Covering the car with a quilt to prevent hail damage: The elasticity of the quilt can cushion some of the impact force from the hail, acting like a protective layer for the car.
11
0
Share

What is the ground clearance of the Ford Kuga?

Ford Kuga's minimum ground clearance is 210mm. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding wheels) and the supporting surface when fully loaded and stationary, which indicates the vehicle's ability to pass over obstacles like stones or stumps without collision. Below is more related information: Minimum ground clearance: Generally, the greater the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, reducing stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, increasing stability. Minimum ground clearance must consider the passability of loading/unloading platforms during transportation and the possibility of not scraping when the car is near ordinary sidewalk edges. If sales are limited to certain countries or regions, local road quality must also be considered. Additionally, the value of minimum ground clearance has certain limitations, relating to vehicle function and aerodynamics. Some models have a range of minimum ground clearance values, indicating they may be equipped with adjustable suspension, allowing ground clearance to change based on driving conditions.
4
0
Share

What is the difference between a driver's license and a vehicle license?

The differences between a driver's license and a vehicle license are as follows: 1. Different subjects: A driver's license is a permit to drive motor vehicles, while a vehicle license is a document permitting motor vehicles to drive on roads within China. 2. Different purposes: A driver's license can be used as valid identification for hospital registration, etc., while a vehicle license serves as a road driving permit. 3. Different contents: A vehicle license records information such as license plate numbers, while a driver's license records the driver's personal information.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.