···
Log in / Register

What is the weight of the Baojun 630?

6Answers
MacTravis
07/29/2025, 01:30:31 AM

Baojun 630 models have a curb weight of 1206 kg for the manual version and 1220 kg for the automatic version. Introduction to vehicle weight: Vehicle weight refers to the weight of the car itself. Since the vehicle is affected by gravity, all its performance characteristics will be influenced. If a car is too heavy, its speed cannot be fully utilized; if it's too light, stability is reduced. Therefore, there are pros and cons to each, so careful consideration of vehicle weight is necessary when choosing a car. Lighter vehicles accelerate faster, but steering becomes more sensitive, making them prone to skidding or drifting during turns, which can also result in slower cornering speeds. Heavier vehicles don't necessarily accelerate slowly; with increased torque, acceleration can still be very quick. Impact of vehicle weight differences: Generally, small cars are lighter than large cars. Differences in components such as chassis, tires, soundproofing materials, and seat materials can all contribute to variations in vehicle weight.

Was this review help?
103
Share
LaHarper
08/12/2025, 03:31:03 PM

I remember the weight of the Baojun 630. Based on my experience, it's around 1,250 kg, depending on the configuration, such as manual or automatic transmission. I drove this car for several years, and the weight had a noticeable impact, especially on highway stability—it didn't feel floaty at all. However, you need to watch the fuel consumption; in city driving, it's around 8 to 9 liters per 100 km. Lighter cars are more fuel-efficient but more susceptible to wind effects. I recommend checking the manual or online forums when buying, as cars from different years might differ by tens of kilograms due to changes in material design and safety standards. Overall, it's a solid choice for a family car—spacious enough for daily commuting, and don't worry about the weight affecting the driving experience.

Was this review help?
4
Share
Expand All
IslaMarie
10/03/2025, 02:44:42 AM

I've looked into the weight of the Baojun 630. The typical curb weight is around 1200kg, with the manual version being approximately 1180kg and the automatic version possibly reaching 1250kg. As someone who enjoys studying cars, I think this weight is moderate for its class—similar to the Emgrand, for instance. However, cars nowadays are trending toward lightweight designs using high-strength steel to save fuel. Weight impacts safety; heavier cars offer better cushioning in collisions but may handle turns more sluggishly. When buying a car, you need to balance these factors. For urban commuting, a lighter version is more economical, while a heavier car provides better stability for long trips. Always refer to official data rather than relying solely on advertisements.

Was this review help?
11
Share
Expand All
VonLondyn
11/16/2025, 03:22:29 AM

Speaking of the weight of the Baojun 630, I paid attention to it when choosing a car, which is about 1200kg. This car is quite suitable for family use, as it can carry passengers and cargo without difficulty. The moderate weight ensures it doesn't struggle with power and keeps fuel consumption within a reasonable range, typically around 7-8 liters per 100km in daily driving. Don't worry about the maintenance burden due to its weight; the key is to regularly check tire pressure and suspension. In short, weight isn't a big issue as long as safety comes first.

Was this review help?
9
Share
Expand All
LeIan
01/06/2026, 10:12:55 PM

I think the Baojun 630 weighs approximately 1180 to 1250kg, with noticeable differences between specific models. As someone considering buying a new car, I would emphasize that weight directly affects the driving experience—lighter cars accelerate faster but have poorer stability, while heavier cars are more reliable for long-distance driving and easier to save fuel in city driving. I recommend comparing models from the same brand or test-driving to get a feel. Safety crash test reports show that weight is related to safety ratings, so ordinary users shouldn’t overlook these details for a more reassuring daily driving experience.

Was this review help?
17
Share
Expand All
DiLaila
04/03/2026, 04:13:48 AM

Focusing on the weight of the Baojun 630, I remember it being around 1200kg, which affects its environmental performance and fuel consumption. As I lean towards energy-efficient vehicles, this is a key point of analysis. Heavier vehicles tend to have lower fuel efficiency, with urban fuel consumption possibly 10% higher. However, with material optimization, current vehicles are reducing weight and emissions to meet green standards. In the long run, the trend towards electric vehicles promises even lighter weights. For its class, the Baojun strikes a decent balance, offering simple maintenance and no major safety concerns.

Was this review help?
5
Share
Expand All
More Q&A

What are the symptoms of a damaged outer CV joint in a car?

The symptoms of a damaged outer CV joint in a car are as follows: 1. The main manifestation is the jamming of the steel balls, which results in a clicking sound (but this must occur under the condition of changing direction). 2. Another symptom is the crushing of the steel balls, which causes the engine's power to fail to reach the wheels, leading to slipping between the inner and outer parts of the CV joint. Without professional inspection equipment, the following parts of the car's CV joint should be checked: 1. The dimensions of the internal and external splines and threads, as these affect the installation size of the CV joint. 2. Check the size of the oil seal groove on the outer CV joint, as different models of CV joints may have varying oil seal groove sizes. 3. Verify whether the internal spline's retaining ring groove is correct, as the width of the retaining ring groove affects the axial movement of the CV joint on the half-shaft after installation. 4. Insert a shaft into the internal spline and wiggle the CV joint to check if it rotates smoothly. 5. Material and heat treatment properties require specialized equipment for inspection.
109
Share

How Often Should a Family Car Be Recharged with Refrigerant?

For average-performance cars, the refrigerant recharge cycle is shorter, requiring a recharge within two years; for high-performance cars, the cycle is longer, allowing up to eight years before a recharge is needed. Methods to determine whether a refrigerant recharge is necessary are as follows: 1. Continuous bubbles in the sight glass during normal air conditioning operation: This indicates that the refrigerant level is insufficient and needs timely replenishment. 2. No bubbles in the sight glass during normal air conditioning operation: This means that a certain amount of refrigerant needs to be released, indicating an overcharge. 3. Brief bubbles appearing in the sight glass during normal air conditioning operation: This shows that the refrigerant level is within the normal range.
103
Share

How to Turn Off the Airbag Light?

Methods to eliminate the airbag light: Send the vehicle to a 4S shop for inspection and repair as soon as possible. After confirming there are no issues, the staff will use a specialized fault decoder to turn off the airbag light. Unlike the tire pressure light on some car models, which can be manually reset, the airbag light serves as a reminder to check and repair when it illuminates. Here is some information about airbags: 1. An airbag generally consists of sensors, a microprocessor, an electronic control unit, an airbag cover and support ring, the airbag itself, and an airbag module. 2. If the airbag indicator light continues to flash or stays on for more than 6-8 seconds after the vehicle is started, or if it flashes for 5 seconds and then stays on while the vehicle is in operation, it indicates a possible fault with the airbag system.
108
Share

What are the differences between the VV5 and VV7?

The differences between the VV5 and VV7 are as follows: 1. The VV5 is a compact SUV, while the VV7 is a midsize SUV, resulting in significant differences in size and interior space. 2. In the mainstream configurations, the VV5 is equipped with a 1.5T engine, with only the high-end version featuring a 2.0T, whereas the VV7 comes standard with a 2.0T engine, leading to a difference in power. 3. As a more modest model in the WEY brand lineup, the VV5's overall material quality falls slightly short compared to the flagship VV7. Although the VV5 surpasses other SUVs in its price range in terms of materials and craftsmanship, it still cannot match the VV7, which is positioned in the 200,000 RMB segment. 4. In terms of NVH (Noise, Vibration, and Harshness), the VV5's noise filtration is not as effective as the VV7's. The VV7 not only incorporates extensive sound-deadening materials for passive noise reduction but also features active noise cancellation technology for the engine, resulting in overall higher comfort levels.
117
Share

What does mic mean in a car?

Mic in a car stands for microphone. Here is some relevant information about mic: 1. Main functions of in-car mic: Inside the vehicle, the microphone is primarily used for Bluetooth call answering and navigation voice playback. The technical name for a microphone is actually "transducer," which is a device that converts sound signals into electrical signals, directly transliterated from the English word "Microphone." 2. Three frequency bands of mic: FM band, VHF band, and UHF band. 3. VHF band: The VHF band is commonly referred to as the V band, with frequencies between 180-280MHz. Due to its higher frequency, it experiences less interference and uses crystal frequency locking, resulting in more stable reception performance.
115
Share

What Are the Hazards of Severe Shaking When Starting a Manual Transmission Car?

Severe shaking when starting a manual transmission car can lead to the following hazards: 1. Aggravates engine carbon deposits: The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon deposit inside the engine, the gasoline sprayed by the cold-start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits is then sucked into the combustion chamber by the engine's vacuum, making the air-fuel mixture too rich. This fluctuation between lean and rich mixtures causes idle shaking after a cold start. The lower the temperature, the more fuel is required for a cold start, and the presence of carbon deposits will significantly affect the success of the cold start. 2. Damages the car's spark plugs: If the shaking phenomenon during the start of a manual transmission car is not addressed promptly, it can harm the spark plugs and even the entire ignition system. In severe cases, it can lead to poor ignition and spark plug misfires. 3. Accelerates the aging of engine components: Car shaking is also related to worn engine mounts. Engine mounts act as the shock absorption system for the engine, absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations will transfer to the steering wheel and the cabin, causing shaking during idle.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.