···
Log in / Register

What is the weight of the Audi A6?

4 Answers
VonWillow
07/29/25 5:26pm
Audi A6 has a curb weight of 1760 kg. More relevant information is as follows: 1. The Audi A6 is a luxury car produced by Audi, available in both sedan and station wagon variants. In terms of body dimensions, the Audi A6 measures 5012mm in length, 1855mm in width, and 1485mm in height, with a wheelbase of 2945mm. 2. In terms of exterior design, the front grille of the Audi A6, which was previously divided by the front bumper, has been transformed into a single trapezoidal grille. The rear end has been redesigned from a smooth, rounded shape to a slightly raised angular form, which serves as a spoiler. This design enhances the vehicle's downforce at high speeds, improving both handling and safety during high-speed driving, while also giving the rear a more robust and sporty appearance.
Was this review help?
17
0
Share
LeKeira
08/14/25 8:21am
I've been driving for several years. The curb weight of an Audi A6 generally ranges between 1,800 kg to 1,900 kg, depending on the specific model and configuration. The base version is lighter, while higher trims with additional equipment weigh more. This weight gives the car a particularly stable chassis feel, providing great security on highways without unnecessary swaying. However, the extra weight also affects fuel consumption, adding about 0.5 liters per 100 km in city driving and making acceleration slightly slower. I recommend test-driving both the standard and hybrid versions before choosing – the latter might be dozens of kilograms lighter with better handling. Additionally, with heavier body weight, be more cautious when parking and turning to avoid collisions. Overall, the A6's weight design is quite balanced, achieving both safety and comfort.
Was this review help?
5
3
Share
Expand All
JacksonDella
10/13/25 6:56am
I own an Audi A6, and the whole car weighs about 1,700 kilograms, which is the standard for the front-wheel-drive base model according to the manual. It's quite convenient for daily use, with plenty of space for luggage, but the weight makes parking a bit challenging, especially when the parking spots in the neighborhood are narrow—it often takes a few extra maneuvers. On the highway, the weight keeps the car stable; it doesn’t feel floaty even at 120 km/h, much safer than some lighter cars. In terms of fuel consumption, the extra weight means slightly higher fuel usage when the AC is on in summer, costing me an additional few dozen yuan per month. When I was choosing a car, I tested different generations—the newer C8 model is dozens of kilograms lighter than the older ones but drives even smoother. Overall, weight is a key factor affecting durability and operating costs.
Was this review help?
19
3
Share
Expand All
Blake
11/26/25 7:54am
After working in the auto repair shop for a long time, I've noticed that the Audi A6 typically weighs around 1800 kg, depending on the engine and materials used. The aluminum body reduces the weight, making it several hundred kilograms lighter than steel, which is easier to handle. Heavier vehicles put more stress on the suspension and braking systems, accelerating wear and tear, so I always remind customers to regularly check tire pressure and bearings. From a safety perspective, heavier cars offer better protection in collisions, but extra caution is needed when reversing to avoid scratches. The hybrid version is lighter, weighing around 1700 kg, making maintenance simpler and saving on materials. I recommend owners pay attention to weight specifications to match their usage habits, saving money and hassle in the long run.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

How Many Credit Hours Are Required for Subject 2?

According to the "Motor Vehicle Driver Training Teaching and Examination Outline," for the Subject 2 test of C1 and C2 driver's licenses, a total of 16 credit hours are generally required. As per relevant regulations, the number of credit hours can be increased but not reduced. Additionally, regulations may vary in different regions, so the specific number of credit hours should be determined based on local rules. Here are the relevant details: 1. Content of Subject 2: Subject 2 learning is divided into theoretical knowledge and practical operations. Theoretical knowledge includes basic driving operation standards and site driving knowledge, typically arranged for 2 credit hours. Practical operations involve basic driving skills such as driving posture, getting in and out of the car, starting and stopping, as well as learning the test items for Subject 2. 2. Recording Credit Hours for Subject 2: With the increasing number of people learning to drive, many driving schools offer services to help students record credit hours to expedite the examination process. Once students begin Subject 2 practice, the driving school will record videos of the practice sessions and assist in logging the credit hours. Students can then focus on practicing, and once the required credit hours are completed and practice is finished, they can proceed to schedule the test. However, different driving schools may have varying requirements for recording credit hours, so specifics should be confirmed locally.
17
3
Share

How many points should be deducted for not yielding to a school bus?

According to Article 11, Clause 8 of the "Measures for the Scoring Management of Road Traffic Safety Violations": Failing to yield to a school bus as required while driving a motor vehicle will result in a deduction of 3 points and a fine. Since school buses are special vehicles, especially when they stop to pick up or drop off students, vehicles around the school bus must yield, slow down, and pass cautiously. Do not compete with the school bus for the right of way, honk, or use lights to urge the school bus to move. Correct methods for yielding to a stopped school bus: On a road with only one lane in the same direction: When a school bus stops on a road with only one lane in the same direction, vehicles behind must stop and wait, and are not allowed to overtake. On a road with two or more lanes in the same direction: When a school bus stops on a road with two or more lanes in the same direction, vehicles in the same lane behind the bus and in the adjacent lane must stop and wait, while vehicles in other lanes should slow down and pass. When riding a school bus, it is important to fasten your seatbelt to avoid collision injuries during braking. Eating or drinking is prohibited while the school bus is in motion to prevent food or beverages from entering the respiratory tract during sudden braking or accidental collisions, which could cause harm or endanger life.
18
2
Share

What Causes Noise When Braking?

Reasons for brake noise: 1. Noise from new brake pads: Many car owners believe that a sharp, piercing sound when braking in a new car must indicate a quality issue with the vehicle. However, this is not the case. New brake pads and discs require a break-in period. When braking, if the pads happen to grind against a hard spot (due to the material of the pads), this noise can occur, which is completely normal. 2. A dull sound when braking: This situation is often caused by a malfunction in the brake caliper, such as wear on the sliding pins or detachment of the spring clips, which can prevent the caliper from functioning properly. 3. A clicking sound during hard braking: This is likely the sound of the ABS system operating normally. The ABS system keeps the wheels on the verge of locking, causing intermittent rolling. When hard braking triggers the ABS, it produces a clicking sound, which is normal. 4. A hissing sound when braking: This noise can be caused by issues with the caliper, brake disc, or brake pads. If the noise is continuous, the first thing to check is whether there is any dragging. Poor caliper retraction can cause prolonged friction between the disc and pads, leading to noise under certain conditions. If the noise occurs right after installing new pads, it may be due to a mismatch in size between the new pads and the friction blocks.
5
3
Share

How to Calculate Fuel Costs?

Fuel cost calculation method: Determine the fuel cost per kilometer by dividing the total refueling amount by the fuel price and then by the mileage, based on how many kilometers the car runs after a full tank of gasoline, along with the total refueling amount and the fuel price at that time. Here are related introductions: 1. Gasoline operation: The energy of the car's internal combustion engine is converted from thermal energy to mechanical energy through ignition to power the vehicle. 2. Gasoline anti-knock properties: During driving, gasoline has the ability to resist knocking combustion. The anti-knock property of gasoline is reflected by its octane number. The higher the octane number, the better the anti-knock performance. 3. Gasoline properties: Gasoline is very stable under natural conditions and does not corrode equipment such as cylinders during storage and transportation. 4. Gasoline grades: China uses grades to differentiate the production and sale of gasoline. The grade of gasoline is determined by its octane number. Generally, gasoline with a higher grade has better anti-knock performance. Drivers should choose the gasoline grade based on the engine's compression ratio or consult the vehicle's user manual.
14
4
Share

How Many Points Can Be Deducted During the Probationary Driving Period?

All types of driver's licenses have 12 points during the probationary period, with specific requirements as follows: 1. For a C1 driver's license, a maximum of 11 points can be deducted during the probationary period. 2. For A and B class driver's licenses, if more than 6 points are deducted during the probationary period, the probationary period will be extended by one year. If more than 6 points are deducted again during the extended year, the license will be directly revoked. Therefore, it is best not to have more than 6 points deducted for A and B class licenses during the probationary period. The calculation method for the driver's license point accumulation cycle is as follows: 1. The cycle starts from the date the driver's license is first issued, with each cycle lasting 12 months. According to the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' Article 65, the accumulation cycle for traffic safety violations (i.e., the point cycle) is 12 months, with a maximum of 12 points, calculated from the date the driver's license is first issued. 2. Based on the severity of the traffic safety violation, the points deducted for a single violation can be: 12 points, 6 points, 3 points, 2 points, or 1 point. 3. Article 66 states that penalties and point deductions for traffic safety violations by motor vehicle drivers are executed simultaneously. If a driver commits multiple violations at once, the points should be calculated separately and accumulated.
19
3
Share

What does shuffle mean?

Random selection playback, unordered playback. The following is a related introduction to car Bluetooth: 1. Function: Bluetooth/car phone is designed for driving safety and comfort. Passengers only need to have a mobile phone with Bluetooth function to connect with the car Bluetooth, so as to make and receive calls through the car Bluetooth. 2. Function: Automatically identify mobile phones, no need for cables or phone holders to connect with mobile phones; users do not need to touch the mobile phone (hands remain on the steering wheel) to control the mobile phone, and use voice commands to control answering or making calls. Users can make calls through the car audio or Bluetooth wireless headset.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.