What is the weight of the Alphard?

2 Answers
Ibarra
07/28/25 11:16pm
There are currently 3 models of the Alphard on sale, with a curb weight ranging between 2270-2290kg. It is a 5-door, 7-seater MPV with dimensions of 4975*1850*1945mm. In the same class, the 2021 Vellfire has a curb weight of 2270kg, while the Lorinser-MS500L-2020 weighs 2370kg. In terms of power, the 2021 Alphard comes in three variants: Luxury, Prestige, and Executive. All are equipped with a 2.5L naturally aspirated engine and an Electronic Continuously Variable Transmission (E-CVT). The engines all have 4 cylinders in a transverse layout, with front-engine, four-wheel drive configuration. For other features, some or all 2021 Alphard models come with driver/passenger airbags, front/rear side curtain airbags, ISOFIX child seat anchors, driving assistance imaging, rear cross-traffic alert, driving mode selection, etc. It's worth noting that the current 3.5L Alphard's powertrain is directly transplanted from the Lexus RX350. All operations can be completed effortlessly, and its idle smoothness has reached Crown-level refinement. Affected by its 2-ton weight, the Alphard's 0-100km/h acceleration lags behind the Highlander with the same powertrain, but offers superior acceleration smoothness.
Was this review help?
4
2
Share
LeKaleb
08/12/25 3:41am
As a family car owner, I've been driving the Alphard for several years. It typically weighs between 2150 to 2300 kilograms, available in gasoline and hybrid versions—the hybrid being slightly lighter. The substantial weight makes it very stable on highways, ensuring kids in the back seat aren't jostled by bumps and sway. However, parking in the city becomes a challenge, requiring extra steering wheel turns and cautious maneuvering. Naturally, fuel consumption is higher—I've calculated it to be over 11 liters per 100 km in urban driving, making each refuel a hit to the wallet. The heavier weight also affects suspension longevity, necessitating a comprehensive check-up every six months to prevent excessive tire wear. Compared to the Honda Elysion, the Alphard is heavier but offers far more luxury, making family members more willing to endure long trips with fewer complaints. In short, the weight is a double-edged sword—sacrificing some convenience for safety and reliability.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

How to Remove Engine Oil Stains from Pants?

Alcohol can dissolve in both organic solvents and water. The higher the alcohol concentration, the better, with anhydrous alcohol being the best option. Alcohol is available at pharmacies or chemical supply stores. For oil stains on clothes, you can use turpentine, banana oil, or gasoline to scrub them, then soak the garment in a 3% saltwater solution for a few minutes, and finally rinse with clean water.
1
2
Share

How long does it take for a new car's valves to stop making noise during the break-in period?

New car break-in period is generally between 1,000-1,500 kilometers. Although modern car engines undergo cold running-in treatment before leaving the factory, the more important role of the break-in period is to develop good driving habits. Definition of break-in period: The break-in period generally refers to the process where mechanical components make initial contact, friction, and engagement during operation. Precautions during break-in period: Avoid emergency braking when possible: Emergency braking not only shocks the braking system during break-in but also increases impact loads on the chassis and engine. It's best to avoid emergency braking within the first 300 kilometers of driving. Avoid overloading: Running a new car at full capacity during break-in can damage mechanical components. Therefore, within the first 1,000 kilometers of driving, the load should generally not exceed 75-80% of the rated capacity.
2
0
Share

What are the reasons for a cold engine not starting?

The reasons for a cold engine not starting: the cold start injector is not injecting fuel, coolant temperature sensor failure, intake sensor failure, poor injector atomization, intake pipe carbon buildup, spark plug failure, idle control valve failure, etc. If there is no strong gasoline smell from the exhaust pipe, it indicates a lack of fuel in the cylinders, which may be due to issues with the fuel pump, fuel lines, or fuel pump circuit. If the engine shuts down due to overheating protection after high water temperature, it is recommended to check the electric fan, clean the radiator, or inspect the water temperature sensor for faults. Poor quality fuel can also affect car starting. Inferior fuel often has poor volatility, especially in winter when temperatures are low. During cold starts, the engine block temperature is low, making fuel atomization difficult, which results in the fuel injected into the cylinders not mixing sufficiently with air, causing starting difficulties or even failure to start.
10
1
Share

Should I Change to Antifreeze Engine Oil in Winter?

Winter does not require changing to antifreeze engine oil. Engine oil: As the lifeblood of the engine, engine oil serves multiple functions, including aiding in cooling, sealing against leaks, and preventing rust and corrosion. Engine oil replacement cycle: Fully synthetic engine oil should be replaced every 10,000 kilometers or approximately one year, semi-synthetic oil every 7,500 kilometers or around 6-8 months, and mineral oil every 5,000 kilometers or about half a year. Apart from environmental conditions, engine oil should also be replaced regularly because prolonged use leads to degradation of its functional properties, such as deterioration. Failure to replace it in time can result in inadequate lubrication and cleaning of the engine, causing more severe wear and tear on internal components, shortening their lifespan, and adversely affecting engine performance.
1
2
Share

Does Water Entering Through the Door Glass Gap Have Any Impact?

Water entering through the door glass gap can have significant effects on the vehicle. Here are the specific details: 1. Severe Water Ingress: The electronic modules inside the vehicle can be soaked in water. If not handled promptly and properly, it can corrode wires, connectors, and internal circuit boards, leading to vehicle alarms and functional failures. In such cases, avoid turning on electronic devices if possible. Use a mechanical key to open the door and call for a tow truck to send the vehicle to a repair facility immediately. 2. Minor Water Ingress: If there isn't a large amount of water accumulation on the floor mats, it is recommended to remove the vehicle's battery to prevent electrochemical corrosion, which could worsen the rusting of modules and connectors. Then, take out the floor mats and seat covers for cleaning and drying to prevent odors later on.
20
4
Share

What Causes a Vehicle to Pull to One Side?

The causes of a vehicle pulling to one side are typically attributed to four main reasons: uneven tire pressure between the left and right tires, inconsistent wear on the left and right tires, unequal spring travel in the shock absorbers, and brake system malfunctions. To diagnose a pulling issue, the first step is to inspect the front suspension, checking whether the ball joints and control arms are loose, and whether the tire treads are severely worn or unevenly worn. If the vehicle has been involved in an accident, it is necessary to measure the difference in wheelbase between the left and right sides, as a significant discrepancy can also cause the vehicle to pull. Vehicle pulling refers to the phenomenon where a car, while driving straight on a flat road, naturally drifts to one side, causing the alignment of the front and rear axle centers to deviate from the centerline of the driving trajectory. Minor pulling can lead to uneven tire wear and premature tire failure, while severe cases may result in dangerous situations such as tire blowouts or loss of vehicle control.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.