What is the weight of the 2021 Lavida?

1 Answers
CharlotteAnn
07/29/25 11:08pm
Taking the Lavida 2021 280TSI DSG Comfort Edition as an example, its weight is 1318 kilograms, with length, width, and height measuring 4670mm, 1806mm, and 1474mm respectively, a wheelbase of 2688mm, and a fuel tank capacity of 51 liters. More details are as follows: 1. In terms of suspension, the front suspension of this car is a MacPherson independent front suspension, and the rear suspension is a torsion beam non-independent rear suspension. 2. In terms of power, it is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, a maximum torque of 250Nm, and is paired with a 7-speed dual-clutch transmission.
Was this review help?
15
3
Share
More Forum Discussions

What does the engine fault warning light mean?

Engine fault warning light indicates a malfunction in the engine, which can be caused by: 1. Poor-quality gasoline or excessive carbon buildup in the engine, leading to poor combustion; 2. Faulty oxygen sensor in the engine; 3. Clogged fuel injectors or intake valves due to carbon deposits. The engine fault light turns on during the vehicle's self-check when the ignition is switched on and should go off once the engine starts running. If the light stays on or flashes while driving, it indicates an engine issue, and the vehicle should be stopped for inspection. Not all instances of the engine fault light mean the car cannot be driven. If there are no unusual noises from the engine bay, no other warning lights on the dashboard, no impact on vehicle power, and the transmission shifts gears normally, you can continue driving to the nearest 4S shop for further diagnosis.
20
0
Share

How often should fully synthetic engine oil be changed?

Fully synthetic engine oil should be changed every 8,000 to 10,000 kilometers. Compared to semi-synthetic oil, fully synthetic oil can adapt to a wider temperature range, has a longer service life, and is less prone to oxidation. Under the same working conditions, fully synthetic oil can protect the engine with lower viscosity. Fully synthetic oil is composed entirely of synthetic base oils. Synthetic oil is chemically synthesized, offering superior performance and quality compared to mineral oil refined from petroleum. It better meets the engine's requirements for oil and provides enhanced protection for the engine.
5
5
Share

What are the functions of the OBD interface in a car?

The OBD interface in a car can monitor the working conditions of the engine's electronic control system and other functional modules of the vehicle during operation. By connecting the car's OBD interface to a computer, real-time vehicle data can be viewed, and faults can be detected, providing convenience for car repairs, developing car-related functions, and modifying car equipment. OBD, also known as On-Board Diagnostics, cannot be directly connected to a computer; it requires a gateway device for interconnection. OBD real-time monitoring includes systems and components such as EGR, engine, particulate filter, catalytic converter, oxygen sensor, emission control system, fuel system, etc.
7
0
Share

What Causes Loud Tire Noise in BMW?

BMW loud tire noise is caused by severe wear on the tire tread. Below are the reasons for loud tire noise in BMW and the influencing factors of tire noise: Reasons for loud tire noise in BMW: Driving on poor road conditions or having damaged tires, sudden changes in tire pressure. When the vehicle is in motion, tire noise is generated. The formation of tire noise is related to the severity of tread wear, road roughness, road structure, road material, tire pressure, and tire size. Influencing factors of tire noise: Road structure: The friction and vibration occur when the tire tread meets the road surface. Different road surfaces and tires create different levels of friction and intensity, resulting in varying levels of tire noise. Especially when driving on rough roads, the strong friction and impact between the tread and the ground, along with the resonance amplification through vibrations of components like fenders, make the tire noise more noticeable inside the car. Tread wear: Severe tread wear increases tire vibration noise. The condition of tread wear is related to tire pressure, wheel alignment, and driving style. If the tread wears unevenly, check whether the tire pressure is normal, wheel alignment is accurate, and if there is aggressive driving—all of which are factors that accelerate tread wear. Tire pressure: Abnormal tire pressure affects tire noise, which is also a common reason for loud tire noise in new cars. When the tire pressure is too high, the tire becomes harder; when the tire pressure is too low, the contact area between the tire and the ground increases. Both scenarios intensify the friction between the tire and the road, causing tire noise. Tire tread pattern design: Also plays a dominant role in tire noise.
18
0
Share

Why is the left side too wide when reversing into the parking space?

Reversing into the parking space with the left side too wide is due to failing to control the distance between the car body and the corner of the parking space. The solution is to turn the steering wheel to the left. The degree of turning depends on the progress of reversing; if the rear of the car is close to the end of the parking space, a larger turn is needed. Once the rear of the car starts to lean to the left, straighten the steering wheel to align the car body. When reversing into the space, you can predict whether the car body will cross the line by observing the position between the car body and the left corner of the parking space through the left rearview mirror. If maintaining the current direction will make the distance between the car body and the corner too narrow, turn the steering wheel back half a circle to widen the distance, then turn the steering wheel fully to the left again. Reversing into the parking space is a mandatory test item for obtaining a small car driver's license, assessing the driver's ability to operate the car in a confined space.
10
2
Share

What are the exterior differences between the Mercedes-Benz C-Class and E-Class?

The exterior differences between the Mercedes-Benz C-Class and E-Class are as follows: The C-Class features LED headlights with a neatly arranged linear pattern for the light sources. Higher-end models are equipped with Mercedes' Multibeam LED headlights and 84 independently controllable LED bulbs. The E-Class also uses Multibeam LED headlights with 84 independently controllable LED bulbs and is additionally fitted with LED Star Tail Lights. Taking the Mercedes-Benz C200 as an example: It is a mid-size sedan produced by Mercedes-Benz, with body dimensions of 4708mm in length, 1810mm in width, and 1413mm in height, and a wheelbase of 2840mm.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.