What is the weight of the 2021 Audi A6L?

2 Answers
VonKylie
07/30/25 12:55am
2021 Audi A6L's weight varies depending on the configuration, with options of 1800kg, 1820kg, 1810kg, and 1830kg. Below is relevant information about the Audi A6L: 1. Introduction: The Audi A6L was the first Audi model to enter the Chinese market, with its predecessor being the third-generation Audi 100 (code C3) introduced in China in 1988. The Audi A6L is a series developed by FAW-Volkswagen Audi based on the German new A6, serving as the successor to the A6. 2. Body Structure: The new Audi A6L is closer to Audi's flagship model, the Audi A8, in terms of lightweight body technology. The new Audi A6L adopts a steel-aluminum composite body structure, extensively using aluminum sheets, aluminum profiles, aluminum castings, and hot-formed steel, including body panels.
Was this review help?
19
0
Share
AxelDella
08/15/25 6:21am
The weight of the 2021 Audi A6L varies depending on the configuration, with the curb weight typically ranging from around 1,780 kg to 2,000 kg. For example, the front-wheel-drive version is lighter at approximately 1,780 kg, while the quattro all-wheel-drive version is closer to 2,000 kg. A heavier car feels more stable in daily driving, making it less prone to floating at high speeds, but it also results in higher fuel consumption. Based on my experience, city driving consumes about 10 liters per 100 kilometers. If fuel efficiency is a priority, opting for a smaller displacement version and regularly checking tire pressure can help. Additionally, the car's weight affects handling, providing smoother turns but slower acceleration from a standstill. Overall, Audi offers good balance, and it's recommended to test drive different configurations before making a purchase to get a feel for them.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

What is the purpose of using a tension pulley in belt drives?

The purpose of using a tension pulley in belt drives is to adjust the initial tension of the belt. More details are as follows: 1. A tension pulley is a follower wheel pressed against the belt to control its tension. It is a tensioning device for belt drives. When the center distance of the belt cannot be adjusted, a tension pulley can be used to tighten the belt. The belt pulley transmits power through friction, so the belt must be tensioned during installation. However, after working for a period of time, the belt may stretch and become loose, leading to slippage, and thus requires re-tensioning. 2. If the center distance between the two drive pulleys cannot be adjusted, a tension pulley must be used to ensure normal transmission and prevent slippage. 3. The tension pulley uses a spring or hydraulic pressure to generate a force that tightens the belt, ensuring the belt applies appropriate pressure on the working pulley. The tension pulley is pressed against the outer side of the slack side. The latter causes the belt to undergo reverse bending, which may reduce its lifespan. This type of device is commonly used in drives where an increased wrap angle is needed or space is limited.
19
2
Share

How to Follow Traffic on a Slope During Congestion?

Here are the methods for following traffic on a slope during congestion: 1. When following traffic uphill, the first thing to note is maintaining a safe distance from the vehicle in front. This prevents rear-end collisions caused by sudden acceleration. Also, be cautious to avoid rolling back. Solutions include either firmly pressing the brake pedal or pulling the handbrake tight. As long as the vehicle is in good condition, there's generally no need to worry. 2. Manual transmission vehicles require special attention to stalling. Experienced drivers start on a slope by pressing the brake without using the handbrake. To start, press the clutch, shift into first gear, and when releasing the clutch, quickly release the brake and press the accelerator. 3. For beginners, follow the method taught in driving school: slowly release the clutch until about halfway, when you feel the car noticeably shaking and about to stall. At this point, release the handbrake and the brake (preferably with a bit of accelerator), and the car will slowly climb up. 4. Nowadays, many vehicles are equipped with a hill-start assist system. Simply put, this system automatically holds the brakes during hill starts to prevent the car from rolling back and causing accidents. It also allows the driver to easily switch from the brake pedal to the accelerator without feeling flustered.
4
0
Share

What brand of audio system is used in the Buick Verano?

The top trim of the Buick Verano features a BOSS audio system, while the lower trims come with high-fidelity audio. Here are the details about the Buick Verano: Introduction: The new car is positioned above the Excelle and serves as the flagship model in Buick's compact product line. In terms of dimensions, the Buick Verano measures 4718mm in length, 1802mm in width, and 1466mm in height (1471mm for the 1.5T model), with a wheelbase of 2700mm. The powertrain options include a 1.5L and a 1.5T engine, with maximum power outputs of 118 horsepower and 169 horsepower, respectively. For transmission, the 1.5L engine is paired with a 6-speed automatic or manual transmission, while the 1.5T engine is matched with a 7-speed DCG dual-clutch transmission. Safety Features: In terms of safety, the Verano comes standard with the latest Bosch ESP system (featuring 17 active safety functions), TPMS intelligent tire pressure monitoring system, ISOFIX child seat anchors, rear parking sensors, and six airbags including side curtains. These safety features represent the highest standard in the mid-size car market. For comfort, the Verano includes standard laminated front windshield glass for effective noise reduction and better heat insulation, along with a multifunction steering wheel, sunroof, USB ports, and an anti-haze air filter for enhanced practicality.
17
4
Share

How Should the Driver Handle a Rear Tire Blowout?

Here are the steps to handle a tire blowout while driving: 1. Maintain straight-line driving. If the front tire bursts, the car body will suddenly tilt to one side, and the vehicle direction will deviate or sway. At this time, the driver should not panic but firmly hold the steering wheel with both hands to keep the car moving straight. 2. Adjust the car direction gently. When turning the steering wheel, the movements should be gentle, avoiding repeated sharp turns. 3. Slow down gradually. When decelerating, first release the throttle while keeping the gear engaged. When the car's posture is under control, downshift step by step and repeatedly apply light brake pressure to bring the car to a slow stop. 4. Turn on the warning lights. Once the situation stabilizes, activate the turn signals or parking warning lights and allow the car to come to a gentle stop.
13
3
Share

Do You Need to Step on the Brake When Starting an Automatic Car?

When starting an automatic car in a stationary position, you do not need to step on the brake. However, if the car is about to move, you need to step on the brake. 1. Stationary Start In this state, the car is usually in the "P" gear, which provides braking force. Therefore, you don't need to step on the brake when starting the car. However, from a safety perspective, stepping on the brake while starting is a good habit. 2. Starting to Move When starting the car at a traffic light or preparing to move, you need to step on the brake. In this situation, the car requires power, and most automatic cars have a lock when shifting from "P" to "R" or "N" gear. You must step on the brake to successfully shift gears. Therefore, you need to step on the brake first when starting the car.
9
5
Share

How to Deal with Paint Spots on a Car?

Methods for removing paint spots from a car are as follows: 1. Use banana oil for cleaning: Banana oil, also known as thinner. Banana oil can be used to dilute paint and has a good cleaning effect on paint spots. It is generally available at paint stores, but be aware of its flammable, explosive, toxic, and volatile properties. Banana oil can corrode the paint surface, so it must not be used on the paint surface, but it is safe to use on car glass. 2. Use gasoline for cleaning: Gasoline, a well-known cleaning agent, is essentially equivalent to banana oil in nature. It has a good cleaning effect and does not have the strong corrosive properties of banana oil. It can be applied by wiping with a damp towel. 3. Use essential balm for cleaning: Car owners can use essential balm to remove adhered paint. 4. Use fine sandpaper or a blade to remove: Fine sandpaper, blades, etc., can also remove paint spots with careful operation, but there is a risk of scratching the paint surface. If the scratches are minor, they can be repaired by waxing and polishing without affecting the appearance.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.