What is the warranty policy for the BYD Han?

Will the Engine Automatically Shut Off After Leaving with Push-Button Start?

Push-button start vehicles will not automatically shut off after the owner leaves. Here are specific reasons why the push-button start may not detect the key: 1. Weak battery: For cars with batteries older than 2 years or those parked for extended periods, you can check the battery condition using a multimeter. Normally, the voltage should be around 12V when not in use and above 10V when starting the engine, which rules out battery issues. 2. Poor fuse contact: Lightly tap the fuse box. If the engine starts, it indicates poor fuse contact. 3. Starter motor failure: If the battery has power but no sound is heard from the starter motor when pressing the start button, it may be a starter motor issue, requiring replacement at a repair shop.

13

0

Share

What to Do If the Driver's License Exam Expires?

Here are the steps to handle an expired driver's license exam: 1. If the student has registered but not taken the exam, or failed the subject one exam, the validity period is not counted. Even after three years, they can still go to the driving school to study and take the exam, and it will not be considered expired. 2. If the subject one exam has been passed but it is confirmed that the student cannot complete the remaining exams within three years, they can apply for withdrawal before the expiration. 3. If the three-year period has already expired, most driving schools allow re-registration at a discounted price. 4. If unsatisfied with the original driving school, students can also register at another driving school, but they will not be eligible for discounted prices. 5. If re-registering after expiration, there is no need to cancel the file. However, if registering again or switching to another driving school within the validity period, the student must complete the cancellation procedure at the vehicle management office before taking the exam again.

8

5

Share

How to Use a Car Bluetooth Receiver?

If the car device itself does not have Bluetooth functionality, you must purchase a Bluetooth adapter, choose the AUX pin, and plug it into the AUX jack. If the Bluetooth adapter has a switch, it must be turned on before proceeding with the connection. The relevant instructions are as follows: 1. Pairing: Search for Bluetooth devices on your phone, select the found device, and proceed with pairing. If prompted for a password, enter the pairing password. After successful pairing, the connection is established. You can make and receive calls on the car Bluetooth. Play music on your phone and enjoy it on the car Bluetooth device. 2. Bluetooth Receiver: The Ugreen Car Bluetooth Receiver is a product designed for hands-free car use. The product comes in a stylish color box packaging with an outer sleeve and inner box design, allowing you to easily see the product's parameter information from the colorful outer sleeve. In addition to the Bluetooth receiver, the product also includes two car mounts.

8

1

Share

What does the fault light with a half circle and a cross on Auman mean?

It should be the steering assist system fault warning light. It is recommended to check if there are any issues with the steering assist system. Below are the related introductions: 1. Engine oil pressure warning light: When this light is on, it indicates that the current engine oil level or pressure is below the standard value. 2. Water temperature warning light: When this light is on, it indicates that the current engine temperature is too high or the coolant level is too low. 3. Door not closed indicator light: When this light is on, it indicates that the car door/hood is not closed properly, to prevent the door/hood from suddenly opening while driving. 4. Steering assist system fault light: When this light is on, the steering assist may be weakened or completely lost, or it may suddenly disappear while driving.

2

4

Share

Why does the front wheel of a minivan get hot?

The main reason for tire heating is that the faster the speed and the greater the weight of the vehicle, the higher the degree of heat generated by braking. The heat produced by brake friction causes the tire temperature to rise. Here is some relevant information: 1. Precautions: In hot weather, it is generally advisable to stop the vehicle after driving on the highway for about two hours to allow it to cool down. Remember not to use methods like splashing cold water on the tires, as this can cause cracks and shorten the tire's lifespan. 2. Hazards: Tires generate heat after prolonged high-speed driving, so a slight increase in temperature and inner tire pressure is normal. During the rolling process, tires consume energy, part of which is absorbed by the tire and converted into heat. If the heat is not dissipated in time, causing the tire temperature to rise excessively (exceeding 95°C), it can lead to tire delamination and even tire blowouts.

14

1

Share

What Are the Solutions for High Fuel Consumption in Kia K3?

Automobiles can reduce fuel consumption by cleaning engine carbon deposits, checking the oxygen sensor, regularly replacing the three filters, and inspecting the electronic control unit. Specific methods to reduce fuel consumption: Cleaning engine carbon deposits: Excessive engine carbon deposits are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not obvious, it indicates a large amount of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional technicians to clean the carbon deposits inside the engine. Checking the oxygen sensor: As an internal control unit of the car, the oxygen sensor primarily monitors the fuel-air ratio in the engine. Once damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. After the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gas during driving, at which point the oxygen sensor should be replaced. Regularly replacing the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they become dirty and transmit incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Inspecting the electronic control unit: Although the engine's electronic control unit is highly reliable, in vehicles used for a long time, various faults are inevitable. Fuel consumption of Kia K3: The combined fuel consumption of Kia K3 is 5.3-5.4L/100km. There are currently 4 models of this car on sale. The Strive Connect Edition and Smart Drive Sport Edition have a combined fuel consumption of 5.3L/100km. The Fashion Edition, Youth Edition, and Renew Edition have a combined fuel consumption of 5.4L/100km. The above figures are NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 6.3-7.5L/100km.

13

3

Share

What is the warranty policy for the BYD Han?

Will the Engine Automatically Shut Off After Leaving with Push-Button Start?

What to Do If the Driver's License Exam Expires?

How to Use a Car Bluetooth Receiver?

What does the fault light with a half circle and a cross on Auman mean?

Why does the front wheel of a minivan get hot?

What Are the Solutions for High Fuel Consumption in Kia K3?

How to Transfer a Driver's License Exam to Another Location?

How to Conduct Annual Inspection for a 9-Year-Old Car?

Can motorcycles ride on non-motorized lanes?

What Are the Oil Specifications?