What is the warranty period for the Geely Bin Yue?

Can the Rearview Mirror Fold Outward?

Rearview mirrors can fold outward. Car rearview mirrors are located on the left and right sides of the front of the car, as well as inside the front of the car. The rearview mirrors reflect the conditions behind, beside, and below the car, allowing the driver to indirectly see these areas clearly. They serve as the "second pair of eyes," expanding the driver's field of vision. Structural Principle of Rearview Mirrors: Rearview mirrors have a field of view issue, which refers to the range that the mirror surface can reflect. The industry has proposed three elements of the field of view: the distance between the driver's eyes and the rearview mirror, the size of the rearview mirror, and the curvature radius of the rearview mirror. There is a certain relationship among these three elements. When the distance and size of the rearview mirror are the same, the smaller the curvature radius of the mirror surface, the larger the field of view reflected by the mirror. When the curvature radius of the mirror surface is the same, the larger the size of the mirror surface, the larger the field of view reflected by the mirror. Reflectivity Index of Rearview Mirrors: Rearview mirrors also have a reflectivity index. The higher the reflectivity, the clearer the image reflected by the mirror surface. The level of reflectivity is related to the reflective film material on the inner surface of the mirror.

15

5

Share

How to Remove the Taillight of Hyundai Elantra?

Modern Elantra taillight removal method is as follows: 1. Open the trunk and remove the inner lining on one side of the taillight to reveal the plastic clips securing the lining. Use a flathead screwdriver to pry these clips open, then manually open the lining. Be careful when prying to avoid damaging the plastic clips. 2. There are a total of three nuts securing the taillight. Use a small ratchet with an 8mm socket to remove these three nuts one by one and set them aside. 3. Disconnect the taillight wiring harness. The harness has a single plug - simply pull it out by hand. If it's difficult to remove, gently pry it with a flathead screwdriver. Then remove the lens cover to detach the taillight.

6

2

Share

What is the normal tire pressure for a Chevrolet Malibu?

The normal tire pressure range for the Malibu is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. The Malibu does not come with a tire pressure monitoring system from the factory. It is recommended to purchase a tire pressure gauge, locate the original tire pressure label, press the gauge against the tire valve to measure and read the pressure, and remember to replace the valve cap after checking. Additionally, a tire pressure monitoring system can be installed. Generally, a tire pressure above 2.8bar is considered too high, and below 2.0bar is too low. Risks of overinflation: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing elasticity and increasing the load on the vehicle during driving. Risks of underinflation: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; weakens cord and rubber functionality, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplies friction between the tire and ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in a blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. Typically, it will alert if below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are needed. Tire pressure monitoring not reset. After inflating the tires, the system was not reset promptly, causing it to display old data and trigger the indicator light. Simply reset the tire pressure monitoring system. Damaged tire pressure sensor. The sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If damaged during driving, it can trigger the warning light. A damaged sensor must be replaced.

3

Share

How Long Does It Take to Replace a High-Pressure Fuel Pump?

Replacing a high-pressure fuel pump takes about 2 hours. Introduction to High-Pressure Fuel Pump: A high-pressure fuel pump is a device used to provide tensioning power for prestressed jacks during tensioning operations. The specifications of this device are as follows: ZB2 multiplied by 2/50, where ZB is the device code, the first 2 represents the rated fuel supply per minute, the second 2 indicates the number of fuel supply circuits, and 50 is the rated oil pressure. Applications of High-Pressure Fuel Pump: The primary use of a high-pressure fuel pump is as a power source for hydraulic devices such as jacks, heading machines, extruders, and cotton gins. The installation sequence for a high-pressure fuel pump is as follows: During installation, to prevent debris from entering the machine, all openings on the unit should be covered. Place the unit on a foundation with embedded anchor bolts, and use paired wedges for alignment between the base and the foundation. Align the concentricity of the pump shaft and the motor shaft, allowing a deviation of 0.1 mm on the outer circumference of the coupling. The gap between the two coupling surfaces should be maintained at 2-4 mm, with a uniform gap and a tolerance of 0.3 mm. After connecting the pipelines and confirming the motor's rotation direction, attach the coupling and recheck the shaft's concentricity. After 2-3 hours of actual trial operation, perform a final inspection. If no issues are found, the installation is considered qualified.

14

1

Share

Is the BMW X7 four-wheel drive?

The BMW X7 is equipped with an on-demand four-wheel drive system, which typically operates in two-wheel drive mode and only switches to four-wheel drive under specific road conditions. Below are the relevant details about the BMW X7: 1. The BMW X7 is a large SUV under the BMW brand, with a wheelbase of 3105 mm and dimensions of 5163 mm in length, 2000 mm in width, and 1835 mm in height. 2. The BMW X7 is powered by two engine options: a 3.0-liter turbocharged inline six-cylinder engine and a 4.4-liter twin-turbocharged V8 engine. (1) The 3.0-liter turbocharged engine in the BMW X7 delivers 340 horsepower and a maximum torque of 450 Nm. This engine can output its maximum power between 5500 and 6500 rpm and its maximum torque between 1500 and 5200 rpm. (2) The 4.4-liter twin-turbocharged V8 engine in the BMW X7 produces 530 horsepower and a maximum torque of 750 Nm. This engine can output its maximum power between 5500 and 6000 rpm and its maximum torque between 1800 and 4600 rpm.

14

3

Share

Why Does a Car Leak Antifreeze?

Common reasons for a car leaking antifreeze are as follows: 1. Radiator damage, poor sealing of the upper and lower water chambers. 2. Loose and poorly sealed connections at the overflow tank, water pump joint surface, and cooling system pipelines. 3. Cylinder gasket damage, excessive flatness deviation or warping of the cylinder head and block joint surface, and loose cylinder head bolts, allowing high-temperature and high-pressure gases from the cylinder to enter the cooling system, leading to rapid coolant consumption. Here is some related information: For maintenance, the coolant should be replaced every one to two years of driving. During routine maintenance, regularly check the antifreeze level and freezing point. If abnormalities are found, promptly replenish or replace it, and identify the cause of the leak for repair.

11

4

Share

What is the warranty period for the Geely Bin Yue?

Can the Rearview Mirror Fold Outward?

How to Remove the Taillight of Hyundai Elantra?

What is the normal tire pressure for a Chevrolet Malibu?

How Long Does It Take to Replace a High-Pressure Fuel Pump?

Is the BMW X7 four-wheel drive?

Why Does a Car Leak Antifreeze?

Do Halogen Lights Have Lenses?

Will car parts be replaced when using the car as collateral?

How many meters does it take to brake at forty kilometers per hour?

Is It Normal for Fuel Consumption to Increase After Switching to Full Synthetic Oil?