What is the warranty period for the BYD Tang?

1 Answers
EvangelineRose
07/29/25 4:41pm
The BYD Tang's electric warranty policy is 8 years or 150,000 kilometers. It uses a ternary lithium battery, with the battery cell having a lifetime warranty. BYD is currently the only new energy vehicle manufacturer in the world to offer a true lifetime warranty on battery cells. Common parts warranty periods: Spark plugs: Warranty period is 2 years or 20,000 kilometers. Air filter: Warranty period is 1 year or 8,000 kilometers. Fuel filter: Warranty period is 1 year or 8,000 kilometers. Oil filter: Warranty period is 1 year or 8,000 kilometers. Battery: Warranty period is 2 years or 20,000 kilometers. Tires: Warranty period is 6 months or 5,000 kilometers.
Was this review help?
14
5
Share
More Forum Discussions

How Long Does It Take for Fuel Consumption to Return to Normal After an Oil Change?

If the increase in fuel consumption is solely due to an oil change, it typically takes driving approximately 200 to 500 kilometers for the fuel consumption to decrease. Here’s an introduction to engine oil: Function: Engine oil, also known as engine lubricant (English name: Engine oil), with a density of about 0.91×10³ (kg/m³), serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and act as a shock absorber in the engine. Composition: Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of the lubricant, determining its fundamental properties, while additives compensate for and enhance the shortcomings of the base oil, providing additional performance characteristics, making them an essential part of the lubricant.
14
5
Share

What does 'Pending Internal Network Confirmation' mean?

Pending internal network confirmation means that the car owner has selected their desired license plate number, and it is currently under review. Generally, the vehicle management office will complete the review within three to five working days. During this review period, the license plate cannot be confirmed for registration. Once the status changes to 'Approved,' the owner can proceed with the registration. More relevant information is as follows: Choosing a license plate number: Typically, after selecting a license plate number, whether online or at the site, it takes a few days before the plate is installed. During this time, the online status will show as 'Pending Internal Network Confirmation.' The vehicle management office needs to review the relevant documents and procedures, hence the waiting period. The final status will indicate 'Approved,' which means the selected number is approved for use. If it's a new car, the owner can proceed to the vehicle management office to complete the registration process, which involves certain steps. Registration process: During the registration process, the main fees include the administrative fee, photography fee, and stamping fee. After paying these fees, the vehicle can be driven home with the license plate in a couple of days.
1
3
Share

Is a fuel consumption of 13.6 considered high?

Strictly speaking, a fuel consumption of 13.6L/100km is relatively high. Here are some methods to reduce fuel consumption: Start smoothly: The first thing everyone should do is to start the car smoothly. Many drivers pursue aggressive driving and rapid acceleration starts. Every time they stop at a traffic light, they are the first to rush out, which might look impressive on the surface. However, this kind of operation will increase fuel consumption. Everyone should aim for a smooth yet quick start to reduce the engine's warm-up time and improve fuel efficiency. Avoid frequent sudden braking: Of course, this situation is the most common driving habit among many novice drivers. Due to insufficient driving skills, they tend to slam on the brakes suddenly in emergencies, causing the vehicle to stop abruptly. If the brakes are applied this way every time, it will not only increase fuel consumption but also potentially lead to rear-end collisions from vehicles behind.
10
2
Share

Do You Have to Replace Two Tires at the Same Time?

Replacing tires does not necessarily require changing two at once; you can decide to replace one or a pair based on the situation. However, for safety reasons, it is generally recommended to replace both tires together. This ensures consistency in brand, specifications, tread pattern, and structure between the two tires. Relevant details are as follows: New Car: If the car is new and has not been driven extensively, you only need to replace the problematic tire, as the wear on tires of the same axle is usually similar. After tens of thousands of kilometers: At this point, tires may not yet need replacement, but if one tire develops an issue and only that one is replaced, the vehicle may experience uneven height, leading to bumpiness, or steering deviation at higher speeds. In such cases, it is best to replace a pair of tires.
2
1
Share

What is the condition of oil at 175 degrees Celsius?

Medium heat is approximately 140°C~180°C, at which point the oil surface ripples and moves around, with a slight blue smoke rising. When ingredients are added, a large number of bubbles appear around them, accompanied by a sizzling sound. Low-medium heat, around 100°C, is characterized by white bubbles forming on the oil surface, with no sound or blue smoke. High heat, around 200°C, sees the oil surface becoming calm again, with blue smoke rising vigorously. Additional information: Cold oil temperature: Approximately 10-20% heat, the oil surface is calm. Inserting chopsticks into the oil shows no change. Low oil temperature: 30-40% heat, the oil surface is calm with a few bubbles, slight sound, and no blue smoke. Inserting chopsticks into the oil shows almost no bubbles around them. Medium oil temperature: 50-60% heat, the oil surface bubbles mostly disappear, stirring produces sound, and a small amount of blue smoke moves from the sides to the center of the pan. Inserting chopsticks into the oil causes small bubbles to form around them.
7
4
Share

Can a Zhejiang A regional license plate be converted to a Zhejiang A license plate?

Can a Zhejiang A regional license plate be converted to a Zhejiang A license plate? "Zhejiang A regional license plate" refers to the special license plate for small passenger vehicles registered using the "regional indicator." Currently, the combination of the license plate number is such that the 2nd and 5th or the 3rd and 4th digits after "Zhejiang A" are letters, while the rest are numbers, for example: "Zhejiang A·5B55B" or "Zhejiang A·55BB5." More relevant information is as follows: Registration process: For the registration of a "Zhejiang A regional license plate," apart from the different category of indicator used, the procedures and required materials are the same as the original requirements. Application conditions: Answer: Individuals and units that meet the application conditions for incremental indicators can apply for regional indicators. Units and individuals who need to apply for regional indicators can do so through designated websites, platforms, and the small passenger vehicle regulation window. After passing the qualification review, the regulation system will allocate the indicators.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.