What is the warranty period for FAW-Volkswagen transmissions?

What are the differences between the Mercedes-Benz E200L and E300?

E300 features a panoramic sunroof, while E200 has a standard sunroof. The rear lettering differs, with E300 labeled as E300 and E200 as E200. Below is relevant information: 1. E200 and E300 are primarily used to distinguish between high and low configurations. The smaller the number, the lower the configuration and the cheaper the price. For example, the E200 is equipped with a 2.0T-L4 inline four-cylinder engine, whereas the E300 is equipped with a high-power version of the 2.0T engine, capable of producing up to 255 horsepower. If it were an E320, the configuration would be even higher, featuring a 3.0T-V6 engine. 2. The entire side profile of the Mercedes-Benz E-Class is traversed by a straight "horizon line" waistline, creating a sleek visual effect that extends towards both ends. This is one of the features that distinguishes it from the S-Class and C-Class.

20

2

Share

What are the full dimensions of the Buick Excelle?

Buick Excelle's body dimensions are 4587/1798/1463mm, with a wheelbase of 2640mm. Additional information about the Buick Excelle is as follows: 1. Whether it's the 1.6L, 1.8L-Eco intelligent engine, or the 1.6T turbocharged engine, the Excelle has achieved SAIC-GM's product strategy goal of 'better performance, lower energy consumption, and fewer emissions.' 2. Among them, the 1.6L Eco intelligent engine is highly efficient and environmentally friendly, achieving an excellent balance between power performance and fuel economy, leading a green urban lifestyle with the golden displacement of mid-size cars. 3. The 1.8L Eco intelligent engine has a maximum power of 108kW, with a power-to-displacement ratio of 60kW/L, and a maximum torque of 177Nm that can be unleashed at 3800rpm.

14

3

Share

Can Vehicle Overloading Cause Tire Blowouts?

Vehicle overloading can cause tire blowouts. Below is relevant information about overloading: Hazards: Research has found that when a vehicle's axle load exceeds the standard load by one time, driving on the highway once is equivalent to a standard vehicle driving on asphalt pavement 256 times or on cement concrete pavement 65,536 times. Moreover, the larger the vehicle's rated load capacity, the more severe the damage caused by overloading to the road. The maximum single rear axle load monitored in China reached 24 tons. Such a vehicle driving on a cement highway once is equivalent to a standard vehicle driving 1.21 million times. Negative Impacts: Overloading has caused significant harm to the healthy development of the transportation market. Overloading leads to market chaos, completely disrupting the basic price formation system of the transportation market. Under normal circumstances, transportation pricing is based on the cubic meters and weight of the cargo. Overloaded vehicles severely pollute the atmospheric environment. To achieve greater traction power, overloaded vehicles often drive at low gears with high throttle, resulting in incomplete fuel combustion in the engine. This leads to excessive exhaust emissions, excessive noise, and severe pollution of the atmospheric environment.

13

0

Share

Reasons for the malfunction of all power windows in Emgrand EC820

Reasons for the malfunction of all power windows in Emgrand EC820: 1. Due to deformation or damage of the window channel, or loose screws of the window regulator. 2. The grounding wire of the combination switch is detached, the main power wire is detached, poor contact of the relay, damage, or poor contact of the lock switch or failure to close it. 3. The window regulator is stuck. Below are precautions for car windows: 1. To prevent rainwater from flowing in, there are rubber seals on the window frames inside the car. When the glass is dirty, the friction with the rubber seals increases, affecting the operation of the windows, so the glass needs to be kept clean regularly. 2. Small cards are often inserted into the gaps of the windows. If not handled properly, the cards may fall into the door interior. The internal structure of the door is complex, and a series of chain reactions may occur if a card falls into the door, such as damage to the window regulator, door malfunction, or clogging of the drainage holes.

11

0

Share

Does Turning the Steering Wheel While Braking in Place Damage the Car?

Turning the steering wheel while braking in place can damage the car, as it may cause premature aging of the steering wheel. Below is relevant information about the harm of turning the steering wheel in place: Hazards: Turning the steering wheel while stationary places significant stress on the steering system. Repeatedly doing so forces the steering system to operate under high intensity for prolonged periods, requiring substantial power assistance, which can lead to excessive gaps in the linkage system. The most severe consequence is premature aging of the steering wheel, reducing operational flexibility and potentially causing traffic accidents. Developing good driving habits: It is crucial to develop the habit of turning the steering wheel only when the vehicle is in motion. For example, when making a U-turn to minimize the turning radius, try to reduce the number of steering wheel turns. In such cases, quickly turning the wheel while the tires are slightly rotating can achieve the same effect as turning the wheel in place. If turning in a very narrow space requires stationary steering, avoid turning the wheel to its limit, as doing so in power-assisted steering vehicles may damage the power steering pump.

1

4

Share

What is the model number of the original spark plug for the Sylphy?

The Sylphy uses NGK spark plugs, model LZKAR6AP-11. Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's recommended to follow the user manual. The following standards can be referenced for maintenance replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure everything is cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires according to the firing order, then secure the cover.

14

5

Share

What is the warranty period for FAW-Volkswagen transmissions?

What are the differences between the Mercedes-Benz E200L and E300?

What are the full dimensions of the Buick Excelle?

Can Vehicle Overloading Cause Tire Blowouts?

Reasons for the malfunction of all power windows in Emgrand EC820

Does Turning the Steering Wheel While Braking in Place Damage the Car?

What is the model number of the original spark plug for the Sylphy?

Can a training vehicle drive on the highway?

What Are the Consequences of Long-Term Automatic Transmission RPM Below 2000?

What is the distance for the motorcycle slalom test in Subject 2?

How many reverse lights does the new Hyundai ix35 have?