What is the warranty period for car wiper blades?

1 Answers
MakaylaFitz
07/29/25 8:31pm
The warranty period for car wiper blades is 6 months or 10,000 kilometers. The replacement method is as follows: 1. Lift the wiper blade upright; 2. Press the clip below and remove the wiper rubber strip; 3. Take off the wiper blade; 4. Pry up the front end of the middle clip; 5. Insert the wiper blade into the middle clip, pull it tight by hand, and the replacement is complete once you hear a click. The function of the wiper blade is to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. The maintenance methods for wiper blades include: 1. Use windshield washer fluid to clean the front windshield; 2. Regularly clean or replace the wiper blade rubber strips; 3. Replace the linkage mechanism components.
Was this review help?
11
4
Share
More Forum Discussions

Can Vehicle Management Offices Issue License Plates on Saturdays?

Vehicle Management Offices operate from Monday to Friday, 8:30 AM to 11:30 AM and 1:30 PM to 5:00 PM, excluding statutory holidays, and are closed on weekends. The process for vehicle license plate issuance is as follows: Rubbing: Rubbing is typically performed in the inspection area of the Vehicle Management Office, though sometimes 4S stores may assist with this step. Vehicle Inspection: In the inspection area, submit the prepared documents to the on-duty police officer for vehicle inspection. To facilitate the inspection, the owner should open the engine compartment cover in advance and remove the engine heat shield. Obtaining the Vehicle License and Motor Vehicle Registration Certificate: After selecting the license plate number, the staff will print the license plate issuance voucher and request payment. Upon payment, wait for a period to receive the vehicle license and motor vehicle registration certificate. After obtaining these documents, pay the annual vehicle and vessel tax to collect and install the license plate.
19
5
Share

What are the contents of Subject 2 driving test?

Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. The compulsory test items for small vehicles (C1/C2) include the following 5 items (some regions have a sixth item - highway toll card collection): 1. Reverse parking: Park the vehicle in the designated reverse parking space within the specified time without crossing the yellow boundary lines on either side. 2. Slope parking and starting: Park the vehicle on the slope and start smoothly within the specified time without exceeding the time limit or crossing the line. 3. Right-angle turn (commonly known as 90-degree turn): Complete the turn at a right-angle intersection within the specified time without crossing the yellow boundary lines on either side. 4. Parallel parking: Slowly drive the vehicle into the side parking space within the specified time without touching the yellow boundary lines. 5. Curve driving (commonly known as S-curve): Slowly enter the S-shaped intersection and smoothly pass through the designated route without crossing the yellow boundary lines.
4
2
Share

Does a car with manual-automatic transmission still have a clutch pedal?

A car with manual-automatic transmission does not have a clutch pedal; only purely manual transmission cars come equipped with a clutch pedal. The manual-automatic transmission is a gearbox that combines the functions of manual and automatic transmissions. This technology was developed to enhance the fuel efficiency and controllability of automatic transmissions, allowing the driver to manually decide the shift timing instead of relying on computer automation, thereby improving driving operability and enriching the driver's experience. Clutch operation process: When the diaphragm spring is installed between the clutch cover and the pressure plate, it generates a pre-compression deformation that creates pressure on the pressure plate, causing the driving and driven parts of the clutch to press tightly together, meaning the clutch is engaged. The engine's power is transmitted through the flywheel, which is integrated with the crankshaft, the clutch cover, and the pressure plate to the driven plate, and then through the splined hub of the driven plate to the input shaft of the transmission. The working characteristic of this process is that the torque and rotational speed transmitted by the driving and driven parts of the clutch are the same, with no speed difference or slippage between them.
13
3
Share

What is the Speed Warning Alert?

Speed warning alert function: When the vehicle's speed reaches or exceeds the preset speed set by the owner or the manufacturer, it alerts the driver through sound or visual indicators. Speed warning device: It is an audio alarm system installed in the speedometer to ensure driving safety. If the vehicle speed reaches or exceeds a certain limit, the speed switch inside the speedometer activates the buzzer circuit, triggering an audible alarm. Hazards of speeding: The steering wheel becomes unstable; driving habits intensify; misjudgment of following distance; visual errors in driving; extended braking distance. When following another vehicle, the distance between cars inevitably shortens, increasing the risk of rear-end collisions. The braking distance of a vehicle is mainly determined by its speed. The continuous braking distance is proportional to the square of the speed. Due to inertia, the faster the speed, the longer the braking distance and the unsafe braking period, thereby increasing the likelihood of accidents.
8
0
Share

Why Shouldn't You Use Paddle Shifters?

The function of paddle shifters is to enable gear shifting without stepping on the clutch pedal, directly by pulling the paddle shifters. Here is an introduction to paddle shifters: 1. Usage Method: Select manual mode (usually via a button), then push the gear lever to the D position, and use the paddles to shift up or down. That is, first place the gear lever in manual mode, and then use the paddles to freely switch to the desired gear when the engine speed is appropriate. The most notable feature of the Civic's paddle shifters is that they can be used at any time in D mode, making daily use very convenient. 2. Advantages: As a quick shifting device, paddle shifters can greatly enhance driving operability. Paddle shifters are generally located behind the steering wheel. When operating paddle shifters, drivers usually only need to push the gear into D, S, or manual mode. With paddle shifters, drivers can complete upshifts and downshifts without taking their hands off the steering wheel.
12
4
Share

How to Replace the Key Battery for Volkswagen Lavida?

Steps to replace the battery of Volkswagen Lavida car key are as follows: 1. Prepare the tools needed for battery replacement: 1 flat-head screwdriver, 1 car key that needs battery replacement, and 1 battery. 2. There is a round button on the side of the car key. Press this button with one hand and pull out the mechanical key with the other hand. 3. Hold the key with one hand and the flat-head screwdriver with the other. Find the gap in the middle of the top of the key and insert the flat-head screwdriver. Pry the key up and down until it is opened. 4. Take out the key circuit board, gently push one side of the battery with your finger, and remove the battery. Place the new battery with the positive side up into the battery slot, and gently push the battery until it is completely secured. 5. Cover the key circuit board onto the key, align the two separated halves of the key up and down, and press both sides of the key with your hands until the upper and lower parts of the key are completely fitted. Then insert the mechanical key into the key gap, and it's done.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.