What is the warning light with an exclamation mark inside a triangle?

1 Answers
VonMaximus
07/28/25 7:46pm
An exclamation mark inside a triangle is a general warning light indicating common faults such as: overheating of the dry dual-clutch transmission, intervention or malfunction of the fuel cut-off system, parking sensor failure, exterior bulb failure, engine oil pressure sensor failure, and traction control system warning or malfunction. Solutions for when the general warning light illuminates include: 1. Check if the engine oil pressure sensor is malfunctioning; 2. Check if the traction control system is malfunctioning; 3. Check if the fuel cut-off system is malfunctioning; 4. Check if the dry dual-clutch transmission is overheating. The appearance of an exclamation mark in the vehicle indicates that there is a fault or abnormality that could affect driving safety and damage the vehicle, necessitating inspection and repair.
Was this review help?
5
5
Share
More Forum Discussions

What are the maintenance items for the first car service?

Car first service maintenance items are as follows: Replace engine oil; Replace engine oil filter; Check engine working condition, such as whether pipeline connections are normal, whether there are leakage points, whether the engine sound is normal, and whether there are abnormal noises; Check coolant level, battery fluid, and windshield washer fluid level to ensure they are between the minimum and maximum scale marks. Check brake pad and tire wear, as well as tire pressure condition; Check all oil pipe ports of the system for any signs of oil leakage. Maintenance precautions: After the first service, regular maintenance should also be paid attention to, such as periodic oil and filter changes, checking tire condition and brake pad wear, etc. When changing the oil, pay attention to the oil model and production date to prevent the maintenance shop from substituting inferior products, and take the remaining oil back.
7
0
Share

What are the steps for a beginner driving a manual transmission car for the first time?

Here are the steps for beginners to drive a manual transmission car: 1. Press the clutch pedal all the way down; 2. Push the gear lever to engage 1st gear, the starting gear; 3. Gently press the turn signal lever downward to activate the left turn signal, alerting vehicles in front and behind; 4. Press the horn button to alert pedestrians in front of the vehicle that you are about to start; 5. Release the vehicle's handbrake; 6. Lift the left foot slowly until the clutch reaches the half-clutch position, and the vehicle begins to vibrate slightly; 7. As the vehicle starts moving, release the clutch and gently press the accelerator. Additional information: A manual transmission car uses a manual gear shift mechanical transmission to adjust speed. It involves manually moving the gear lever to change the gear meshing position inside the transmission, altering the gear ratio to achieve speed change. The gear lever can only be moved when the clutch is depressed.
17
3
Share

What brand is the 01 car?

01 car is the first model of the Lynk & Co brand. The Lynk & Co 01 is built on the CMA (Compact Modular Architecture) platform, featuring globally leading safety technologies, quality standards, intelligent connectivity systems, efficient power, and excellent driving performance. Details about the Lynk & Co 01 are as follows: 1. In terms of the powertrain, the Lynk & Co 01 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 190 horsepower (140 kW)/4700 rpm and a maximum torque of 300 Nm/1400-4000 rpm. It is paired with a 6AT transmission (for the front-wheel-drive version), while the all-wheel-drive version comes with a 7-speed dual-clutch transmission. 2. The Lynk & Co 01 features a comprehensive NVH luxury configuration, which prevents noise and vibration at the source, blocks noise transmission paths, optimizes sound quality with stable frequency, and includes an INFINITY Hi-Fi level 10-speaker audio system with a total power output of 360W.
7
4
Share

What engine does the SAIC Maxus G10 use?

SAIC Maxus G10 is equipped with a self-developed engine by SAIC. The SAIC Maxus engine is produced by SAIC Diesel Engine Factory and utilizes technology from Italy's VM Company. The vehicles under SAIC Maxus brand use the SAIC Maxus engine. The engine model for the SAIC Maxus G10 is 20L4E, with a maximum power of 165KW, maximum torque of 350Nm, and maximum horsepower of 228. Here are some daily maintenance methods for the Maxus G10 engine: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid faults, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
2
3
Share

What is the tire size of the Dongfeng Honda Elysion?

The tire specifications for the Dongfeng Honda Elysion are 225/50-R18-95V. Below is relevant information regarding tire maintenance for the Elysion: 1. Inspect tires at least once a month. Check the tire pressure when the tires are cold, including the spare tire. 2. If the owner notices that the pressure decreases too quickly, the cause should be identified promptly rather than simply inflating the tires at a tire shop. The inflation pressure must follow the manufacturer's specified values, as detailed in the owner's manual. 3. Wear indicators. When the tire tread wears down to these indicators, the tires must be replaced. Driving with tires worn beyond the indicators is extremely dangerous on wet roads, as the drainage performance is significantly reduced, severely affecting wet traction. 4. Regularly check wheel alignment and balance. Especially if the vehicle exhibits excessive vibration while driving, this may indicate poor wheel alignment or imbalance. These conditions not only shorten tire life but also affect the vehicle's handling and safety. If the tires show uneven wear, such as the shoulders wearing faster than the rest of the tread, consider rotating the tires. For the first rotation, cross the front and rear tires—move the front left tire to the rear right position and the front right tire to the rear left position.
4
0
Share

How to Disassemble a Volkswagen Polo Car Key?

The method to disassemble a Volkswagen Polo car key is as follows: 1. First, pry open the outer shell. 2. Insert the blade of a flathead screwdriver into the small slot on the side of the key. Note: The screwdriver must be held vertically, and excessive force should not be applied, as it may damage the contact area of the key. 3. Gently turn the screwdriver once or twice. At this point, the gap between the upper and lower parts of the key will increase, showing signs of separation. Be mindful of the force applied. 4. Under the action of the screwdriver, the upper and lower parts of the key will separate. Then, use your hands to pull apart the upper and lower ends of the key, and the key can be divided into two parts. Note: The battery life of a smart car key is approximately one year. Due to varying usage frequencies, the battery consumption will differ. Additionally, using the key at different distances will also affect the power consumption. When replacing the battery of a smart car key, ensure not to use the wrong battery type, as this may cause the circuit board inside the key to burn out.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.