What is the wading depth test of the new X-Trail in meters?

2 Answers
AveryMarie
07/29/25 4:06pm
The maximum wading depth of the new X-Trail is 400mm. The wading depth of the new X-Trail is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the new X-Trail is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the auto start-stop function must be turned off to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water intake. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow it at a low speed, avoiding sudden acceleration or deceleration. For roads prone to waterlogging, observe warning water level markers, trees, and reference points like the wheels and doors of other vehicles to judge the water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not enter the water recklessly; choose an alternative route instead.
Was this review help?
17
3
Share
LuciaRose
08/15/25 4:22am
As an experienced off-roader, I'm quite familiar with the X-Trail's wading depth, which typically ranges between 450 to 500 millimeters, roughly half a meter deep. Official tests usually set the limit at 500mm, but actual driving conditions like water flow speed or road muddiness must be considered. I remember testing it myself once—always ensure the air intake is above water level before wading to avoid water ingestion. Additionally, the X-Trail's underbody sealing is decent, but prolonged water exposure can still cause electrical issues. For safety, I recommend using low gear to maintain steady speed during wading—no sudden acceleration. During regular maintenance, checking tire drainage and underbody rust protection is crucial, as wading performance isn't a one-time deal—upkeep directly impacts performance. Mastering these points makes off-roading safer and more thrilling.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

At how many kilometers can a new car run on the highway?

A new car can run on the highway after 2,500 kilometers. By this mileage, the engine's internal oil film has formed, providing better protection for the engine during driving. Before running on the highway, it is advisable to change the engine oil and oil filter to avoid any abnormalities during high-speed driving. The main purpose of running a new car on the highway is to allow the engine to operate in a better environment. The duration of high-speed driving does not need to be too long; generally, 10 to 20 minutes is sufficient. For cars with engines above 1.5 liters, the speed should not exceed 80 kilometers per hour within the first 500 kilometers on the highway and should not exceed 120 kilometers per hour within the first 3,000 kilometers.
2
2
Share

What are the causes of engine misfire in cars?

Car engine misfire can be caused by: 1. Excessive wear gap in engine cylinder liner piston rings; 2. Fuel injector wear; 3. Spark plug carbon buildup. Engine misfire refers to insufficient power caused by engine failure, resulting in lack of power, with situations where a minority of cylinders are not working. Engine misfire can shorten the service life of lubricating oil and may lead to sudden engine stall, increased fuel consumption, and black smoke emissions. An engine is a machine capable of converting other forms of energy into mechanical energy, originating in the UK. It can refer to either power generation devices or the entire machine including power units, with types including internal combustion engines, external combustion engines, electric motors, etc.
9
3
Share

What does it mean to add cleaning fluid?

Adding cleaning fluid refers to the need to replenish the windshield washer fluid when it runs out. Windshield washer fluid is a consumable item in vehicle use, and some car models can detect the remaining level of the washer fluid. When the windshield washer fluid is depleted, the vehicle will alert the owner to add more promptly to avoid affecting normal usage. Windshield washer fluid is primarily composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. When the transparency of the front windshield decreases, spraying some washer fluid can provide a clear and bright view. During nighttime driving, dust on the windshield can scatter light, so spraying washer fluid helps maintain the windshield in optimal transparency.
6
5
Share

What Components Make Up a Car Air Conditioning System?

A car air conditioning system consists of components such as the compressor, condenser, evaporator, expansion valve, receiver-drier, and piping. The car air conditioning system is designed to cool, heat, ventilate, and purify the air inside the vehicle cabin, providing a comfortable environment for passengers, reducing driver fatigue, and enhancing driving safety. The presence of an air conditioning system has become one of the indicators for evaluating whether a car is fully equipped. Generally, a car air conditioning system includes cooling, heating, and ventilation devices. This integrated system efficiently utilizes the limited space inside the vehicle, featuring a simple structure and ease of operation, making it the internationally prevalent modern car air conditioning system.
18
0
Share

How to Use the Tire Pressure Monitoring in Magotan?

Magotan's tire pressure monitoring usage method: 1. Turn on the ignition switch, press the ESP and EST buttons on the center console for at least 2 seconds; 2. After hearing the confirmation sound "OK", the new tire pressure value is successfully set. The tire pressure monitoring can be viewed on the combination instrument display screen by accessing the vehicle status menu in the display. The Volkswagen Magotan is a B-class sedan launched by FAW-Volkswagen, with body dimensions of 4866mm x 1832mm x 1464mm, a wheelbase of 2812mm, a top speed of 230km/h, and equipped with a 1.8TSI engine.
15
3
Share

Do Snow Chains Damage Tires?

Snow chains do cause damage to tires because the force is mutual. While increasing tire traction, the adhesion coefficient between the tire and the snow chain also rises, naturally leading to tire wear. Additionally, the noise generated during driving becomes more noticeable. Snow chains are made of steel or rubber chains and serve an anti-slip function. They can be structurally categorized into two types: 1. Pre-connected cover-type snow chains; 2. Cross-installed individual snow chains. Car tires are one of the essential components of a vehicle, directly contacting the road surface and working with the car suspension to mitigate impacts during driving, ensuring good ride comfort and smooth driving.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.