What is the wading depth of Wuling Hongguang?

1 Answers
DeMarley
07/30/25 1:27am
The wading depth of Wuling Hongguang is approximately 20cm. Here is an introduction to the relevant content of vehicle wading: Impact: When wading, it may affect the engine by causing water ingress and stalling, and may also damage the vehicle's electronic systems. Damage: If the electronic systems are damaged, it will affect the normal operation of the vehicle. Wading can also cause rusting of the vehicle's chassis. If water is sucked into the engine during wading, the engine will stall. If the electronic systems are damaged, they need to be replaced immediately; otherwise, it will affect the normal operation of the vehicle.
Was this review help?
14
0
Share
More Forum Discussions

What is the BMW G30?

BMW G30 is the chassis code for the imported standard wheelbase version of the 5 Series, representing the seventh generation of the BMW 5 Series and the latest model. The powertrain used in the imported BMW 5 Series is the same as that in the domestically produced long-wheelbase version. The dimensions of the BMW G30 are 5047mm in length, 1860mm in width, and 1491mm in height, with a wheelbase of 2888mm. The imported BMW 5 Series is equipped with three engines: a low-power 2.0-liter turbocharged engine, a high-power 2.0-liter turbocharged engine, and a 3.0-liter inline six-cylinder turbocharged engine. All three engines are paired with an 8-speed automatic transmission.
19
4
Share

What does a 7-speed dual-clutch transmission mean?

7-speed dual-clutch transmission refers to a dual-clutch transmission with seven forward gears, also known as a 7-speed dual-clutch transmission, which uses a dry clutch. Dual-clutch transmissions can generally be divided into wet dual-clutch and dry dual-clutch types, with the current mainstream dual-clutch transmissions typically having six or seven gears. The 7-speed dual-clutch transmission was actually developed based on the technology of the 6-speed, simplifying the related hydraulic systems. Dual-clutch transmissions are usually found in automatic transmission vehicles, such as the current Magotan, where the gear shift knob is marked with DSG, meaning dual-clutch transmission. Traditional automatic transmissions used a single clutch, where one clutch was responsible for disengaging from the current gear and engaging the next gear, whereas a dual-clutch transmission has one clutch responsible for a portion of the operation.
15
3
Share

What are the new materials for repairing cement roads?

Repairing cement roads with new materials involves the use of cement repair compounds. Here are the relevant details: 1. For cracks less than 1.2 cm: You can use GO-GREEN cold pour crack filler, which is directly poured into the cracks. After drying, it permanently repairs road cracks, extends road lifespan, and prevents further damage. 2. For larger damaged areas forming potholes: It is recommended to use GO-GREEN high-performance cold patch. This material allows for all-weather construction, has excellent water resistance, and can be applied directly in rainy, snowy, or cold conditions. No heating is required, and traffic can resume immediately after simple compaction, with a lifespan of up to 10 years. It provides a permanent repair for road potholes.
5
1
Share

Which Part of a Car Is Most Dangerous When Water Enters?

Water entering the car engine is particularly dangerous. Below are relevant details about engine water ingress: 1. Significant water ingress into the engine: If a substantial amount of water enters the engine but does not affect normal driving, though the noise may be louder, it could indicate small amounts of water in the oil or fuel. In this case, changing the oil and cleaning related engine components is necessary. 2. Reasons for a car stalling in water: Water entering the distributor cap can disrupt normal ignition functions, while water in the engine's air filter increases intake resistance and may lead to water entering the combustion chamber, preventing the spark plugs from firing. Restarting the engine under these conditions can easily cause hydrolock.
1
0
Share

What causes the BMW X3 engine to overheat?

It may be due to a malfunctioning coolant temperature sensor. Here is some relevant information about the BMW X3: 1. Model: The BMW X3 is an SUV model with distinctive personality, introducing the new SUV Sports Activity Vehicle concept and equipped with BMW's patented xDrive intelligent all-wheel-drive system. 2. Design Style: The BMW X3 combines the unique proportions of a Sports Activity Vehicle with classic and innovative design elements, featuring a fresh and youthful exterior that emphasizes the brand's design characteristics – robust and powerful. Additionally, the BMW X3's interior can accommodate five people along with ample luggage or sports equipment, providing greater convenience for travel. Currently, the BMW X3 is the latest model in its series.
10
2
Share

What kind of adhesive is best for high-temperature resistance in coolant reservoirs?

AB adhesive provides excellent high-temperature resistance for coolant reservoirs. Here are the relevant details: 1. AB adhesive: It is a two-part adhesive that hardens at room temperature when the resin and hardener are mixed. AB adhesive offers strong bonding strength and is resistant to detachment, making it commonly used in industrial production. 2. Additional information: Before using AB adhesive, it is advisable to wear isolation gloves to prevent direct skin contact and avoid unnecessary issues. After bonding objects with AB adhesive, further processing may be required according to specifications to achieve optimal results.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.