What is the wading depth of Volkswagen's dry dual-clutch transmission?

1 Answers
OMicah
07/29/25 5:08pm
The maximum wading depth for Volkswagen's dry dual-clutch transmission is 150mm. The wading depth of Volkswagen's dry dual-clutch transmission is determined by the vehicle's ground clearance, which is listed in the model's parameter configuration sheet. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake is below the water level when wading with a Volkswagen dry dual-clutch transmission, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. Installing a snorkel can increase the height of the engine's air intake, thereby improving the maximum wading depth. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting if the vehicle stalls in water, which could lead to severe engine damage due to water intake. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Follow the path taken by other vehicles, drive at a low speed, and avoid sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, or other reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, avoid entering the water and choose an alternative route.
Was this review help?
14
1
Share
More Forum Discussions

Why Should You Stay Away from Large Trucks While Driving?

Driving away from large trucks is necessary because they have numerous blind spots, a high incidence of fatigued driving, and long braking distances due to heavy loads, posing significant risks. Here are some points about encountering large trucks while driving: 1. Avoiding Truck Blind Spots: Trucks have large blind spots. During normal driving, trucks often stay near the center line of the road. If slow-moving vehicles block the fast lane, you might have to overtake from the truck's right side, which is highly prone to accidents. 2. Dangers of Large Trucks Turning: When a large truck turns, there's a specific term called 'off-tracking,' referring to the difference between the paths of the front and rear wheels on the turning side. If a car stays in this area, the truck driver cannot see it at all. It's crucial to move away quickly.
14
0
Share

Which country is the production location of Audi cars?

Audi cars are produced in Germany. Audi is a car brand under Audi AG, a subsidiary of the Volkswagen Group, with its headquarters located in Ingolstadt, Germany. Audi also has production plants in countries such as China, Malaysia, and South Africa. The Audi logo consists of four interlinked rings. The brands under Audi include Lamborghini, Audi, and Ducati. Taking the Audi A6 as an example, it is a luxury car produced by Audi, available in both sedan and station wagon versions. The Audi A6 incorporates Audi's high-tech proprietary technologies, further enriches luxury configurations, and is endowed with strong sporty characteristics, featuring luxury, dynamism, and sophistication. In terms of body dimensions, the Audi A6 measures 5035mm in length, 1855mm in width, and 1485mm in height, with a wheelbase of 2945mm.
20
4
Share

How Long Does It Take to Replace a Bumper at a 4S Shop?

If the bumper is pre-ordered, it takes about an hour to replace it at a 4S shop. Without a pre-order, the replacement process usually takes around 3 days. The car bumper (also known as the anti-collision beam), located at the front and rear of the vehicle, is designed to minimize the impact of external damage on the vehicle's safety system and reduce injuries to passengers during high-speed collisions. The bumper is one of the parts most prone to scratches and damage during daily use. Made of plastic, severe scratches can expose the black plastic underneath, significantly affecting the car's appearance. Many car owners opt to replace the entire bumper when it suffers serious damage.
15
5
Share

Where is the ESP switch for the Volkswagen Phideon?

The ESP switch for the Volkswagen Phideon is located within the vehicle's infotainment system, replacing the traditional mechanical button. The ESP function is enabled by default, and pressing this button will deactivate it. ESP stands for Electronic Stability Program, a general term for systems or programs designed to enhance vehicle handling performance while effectively preventing loss of control when the vehicle approaches its dynamic limits. The electronic stability program improves both vehicle safety and handling. The Volkswagen Phideon is a mid-to-large-sized sedan with a 4-door, 5-seat configuration. Its dimensions are 5074mm in length, 1893mm in width, and 1489mm in height, with a wheelbase of 3009mm. It is powered by a 4-cylinder 2.0T turbocharged engine producing 224 horsepower, paired with a 7-speed dual-clutch transmission. In terms of suspension, the front features a five-link independent suspension, while the rear is equipped with a trapezoidal link independent suspension.
11
0
Share

Is a Long-Term Fuel Trim of -14.7 Rich or Lean?

Long-Term Fuel Trim of -14.7 indicates a rich condition. Below is relevant information: 1. Fuel Standards: Generally, the Long-Term Fuel Trim parameter ranges from -23% to 16%. A value of 0 indicates that no fuel compensation is needed to achieve the correct air-fuel mixture. A positive value means the injection system needs to inject additional fuel, indicating a lean mixture condition in the engine, which often results in difficult ignition. A negative value signifies that the injection system needs to reduce fuel delivery to correct an overly rich mixture. Therefore, a negative Long-Term Fuel Trim indicates that the vehicle's air-fuel mixture is too rich. 2. Long-Term Fuel Trim Standard: The standard range is typically ±5%. Exceeding this range usually indicates an engine malfunction. If the vehicle's fuel injectors are clogged, both the fuel injection volume and atomization effect will be poor, leading to a leaner combustible mixture concentration in the engine cylinders.
14
1
Share

Are Cars in Taiwan Left-Hand Drive or Right-Hand Drive?

Taiwanese cars are left-hand drive. Below is a partial introduction about global road traffic directions: 1. Introduction: Road traffic direction is an important aspect of traffic regulations in countries worldwide, stipulating the driving orientation of vehicles on roads to avoid confusion and accidents. Road traffic directions can be divided into two categories: driving on the left side of the road and driving on the right side of the road. 34% of countries drive on the left, while 66% drive on the right. If calculated by road mileage, 28% of the world's passable roads are left-hand drive, and 72% are right-hand drive. 2. Vehicle Driving Direction in Taiwan: Cars in Taiwan are left-hand drive, and vehicles drive on the right side of the road. Taiwanese license plates consist of two English letters at the front followed by four numbers, such as AD-1234.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.