···
Log in / Register

What is the wading depth of the Wuling Rongguang Mini Truck?

4 Answers
McTanner
07/29/25 6:25pm
The wading depth of the Wuling Rongguang Mini Truck is generally no more than half the height of its tires, as this type of mini truck does not have any real wading capability. Cars are not designed for 'diving,' so it's best to avoid water deeper than half the tire height. If the road has deep water accumulation, do not risk passing through to prevent the car from stalling in the water. If the car does stall in water, never attempt to restart the engine immediately. Regardless of whether your vehicle has wading insurance or not, this should not be done. For vehicles without wading insurance, it increases repair difficulty and costs. For those with wading insurance, restarting the engine will void the claim, and the insurance company will not compensate. The first thing to do in such a situation is to leave the vehicle promptly and move to higher ground.
Was this review help?
7
1
Share
DiWalter
08/14/25 11:14am
I remember when I first got my Wuling Rongguang mini truck, I often delivered goods in rural areas and encountered many puddles. I didn’t check the official data in detail, but based on experience, the wading depth should generally not exceed 30-40 cm. Because these small trucks have a relatively low chassis, and the engine air intake is located below the cab, water reaching halfway up the wheel hubs can easily flood the engine and cause it to stall. Once during the rainy season, I drove into a section where the water was half a meter deep, and the engine sputtered, nearly shutting down—luckily, I stopped in time to check and later found the air filter was soaked. My advice for daily use of this truck: before wading, glance at the water depth markers or use a flashlight to check the air intake position; the safest bet is to detour around excessively deep sections to protect the engine and save on major repairs—even though trucks are tough, water damage is something to be careful about.
Was this review help?
14
3
Share
Expand All
McKaylee
10/14/25 5:57am
As a long-term user of the Wuling Rongguang Mini Truck, I find water wading quite crucial. The safe depth is usually between 25-35 cm, but I always act conservatively, like driving slower on rainy days to avoid excessive water splashing. This vehicle isn't designed for off-roading—its intake system and sealing strips aren't high-end. Once water rises above the front bumper, risks escalate, potentially causing electrical shorts or transmission damage. During each maintenance check, I routinely inspect seals and replace aged parts—prevention saves hassle. When encountering puddles, I slow down to avoid hydroplaning; if water exceeds knee height, I simply detour. Safety first, after all.
Was this review help?
1
4
Share
Expand All
Jessica
11/27/25 6:53am
During car repairs, I've encountered cases of Wuling Rongguang mini-truck malfunctions after wading through water, with a general depth limit of about 30 cm. Influencing factors include tire clearance, engine compartment sealing, and circuit height; water that's too deep can easily damage sensors or motor components. It's recommended that owners check the position of the air intake themselves and avoid venturing into deep water areas.
Was this review help?
5
0
Share
Expand All
More Forum Discussions

Do SUV Panoramic Sunroofs Need Tinting?

SUV panoramic sunroofs do not require tinting because the sunroof glass already has UV protection and heat insulation functions. Applying a tint would only reduce the interior light levels. Compared to standard car sunroofs, panoramic sunroofs have a much larger surface area, allowing occupants to see nearly the entire view above. Most modern vehicles with panoramic sunroofs feature two separate glass panels - front and rear - giving both seating rows access to the sunroof. Based on opening mechanisms, panoramic sunroofs can be categorized into: fixed panoramic sunroofs, segmented opening panoramic sunroofs, and full-opening panoramic sunroofs. The segmented opening type maintains a standard sunroof above the front seats while adding a fixed glass panel above the rear seats to enhance light transmission and achieve the panoramic effect.
18
1
Share

Why is the steering wheel slightly tilted to the right?

The reasons for the steering wheel being slightly tilted to the right include: insufficient tire pressure, uneven wear of tire treads, issues with the vehicle's suspension system, power steering problems, vehicle shock absorbers, and wheel alignment problems. Check if there is excessive play in the steering gear, as excessive free play in the steering wheel can cause it to drift automatically. Inspection method: Shake the steering wheel forcefully; there should be no play left or right, and the vertical free travel should not be excessive, with a good surface feel. Check the free play of the steering wheel and all pedals. The entire steering mechanism should be inspected, including: the gear oil in the steering gear, and whether there is a lack of grease in various ball joints, control arms, tie rods, drag links, etc.
10
2
Share

What is the fuel consumption of the 2021 Sylphy?

Maintenance outside 4S shops does not affect the warranty. Here are the maintenance precautions: 1. Choice of maintenance location: According to Article 9 of the Consumer Rights Protection Law: Consumers have the right to independently choose goods or services, and as car owners, they also have the right to choose vehicle maintenance operators. 2. Precautions for external maintenance: As consumers, they can freely choose repair shops for maintenance. As long as the vehicle damage is not caused by maintenance reasons, they can normally enjoy the warranty. If consumers fail to use, maintain, or repair the product correctly according to the instruction manual, resulting in damage, the operator is not responsible for the three guarantees. In other words, except for the maintenance location, other requirements cannot be changed.
14
4
Share

How Long Can You Drive with the Oil Warning Light On?

When the oil warning light comes on, you should not continue driving and must pull over immediately. The reasons for the oil warning light illuminating are as follows: Insufficient oil level: High engine temperature, oil pump wear leading to abnormal operation, improper internal engine coordination, excessive carbon buildup clogging the oil filter, or the pressure relief valve being set too low or improperly adjusted. Engine oil, also known as engine lubricant, is composed of base oil and additives. Low oil level: If the yellow oil warning light comes on while driving, indicating low oil level, this usually means the engine is low on oil. If the yellow oil light turns on, you should park the car in a safe location and check the oil level. If the dipstick shows the oil level is outside the normal range, you need to add oil.
5
5
Share

What is the difference between an auto trading company and a 4S store?

Here are the specific differences between auto trading companies and 4S stores: 1. Authorization: 4S stores are authorized to sell cars, while auto trading companies are not. A 4S store is an officially authorized dealer of a car brand manufacturer, typically selling only one brand's models, whereas an auto trading company can sell vehicles from multiple brands. 2. Business scope: Auto trading companies generally only handle car sales, insurance, and vehicle loans; 4S stores offer a wide range of services including car sales, repairs, parts, maintenance, and test drive appointments. 3. After-sales service: 4S stores integrate car sales, repairs, after-sales service, and parts sales into one comprehensive service, while auto trading companies do not provide after-sales service and lack sufficient after-sales guarantees.
4
5
Share

What Causes Brake Noise in Snowy Weather?

Specific reasons for brake noise in snowy weather: 1. Improper installation of brake pads: When installing new brake pads, the old brake discs were not resurfaced, resulting in a poor fit. Improper installation or failing to resurface the old discs before installing new brake pads will cause the new pads to rub directly against the uneven surface of the old discs, ultimately leading to uneven wear on the new brake pads. 2. Brake system malfunction: There may be inherent defects in the brake system itself, causing the brake pads to only partially contact the brake discs. This increases the pressure per unit area on the brakes, resulting in noise. It is recommended to check components such as the calipers and guide pins. 3. Presence of foreign objects: Foreign objects causing a mismatch in the contact surfaces, leading to noise.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.