What is the wading depth of the Vezel?

1 Answers
Imogen
07/25/25 9:38pm
The ideal wading depth of the Vezel is 73cm, with a safe wading depth around 60cm. It is not recommended to exceed 65cm. When the water depth reaches one-third of the tire height, you can pass through with confidence as long as you operate correctly, avoiding unnecessary damage. When the water depth exceeds half of the tire height, caution is required as this may lead to water entering the vehicle. If the wading depth surpasses the bumper, remain vigilant while driving to prevent water from entering the engine. There are three scenarios of waterlogged vehicles: water covering the exhaust pipe but not reaching half the wheel height, water just reaching half the wheel height, and water exceeding half the wheel height. Generally, water reaching half the wheel height can affect the vehicle. Below are the details: 1. Water covering the exhaust pipe: If water only covers the exhaust pipe, promptly move the vehicle away. Water covering the exhaust pipe will not be sucked back into the engine, and engine stalling is mainly due to water entering the engine's intake system, unrelated to the exhaust pipe being submerged. 2. Water just reaching half the wheel height: If water just reaches half the wheel height, the vehicle usually won't leak. However, if submerged for a long time with aging seals, leakage may occur. In such cases, drive the vehicle to a 4S shop, dismantle the interior, clean, and dry it. 3. Water exceeding half the wheel height: If water exceeds half the wheel height, the engine may take in water, and the interior may leak. Do not start the engine to avoid damage to the engine or electronic components. If the vehicle is waterlogged and starting causes damage, insurance will not cover the repairs.
Was this review help?
19
1
Share
More Forum Discussions

Chevrolet Malibu Battery Model

The battery model uses the SAIL battery 12V60Ah525ASAE/438EN. Below is an introduction to the Malibu: 1. Introduction: The Malibu, officially known as the Chevrolet Malibu, is a mid-to-high-end vehicle born from General Motors, sharing its origins with the Buick "Double Jun" series. 2. Configuration: The Chevrolet Malibu XL, if equipped with a 6-speed transmission, has the 12-volt battery installed in the engine compartment. If equipped with a 7-speed transmission, the 12-volt battery is installed on the driver's side of the luggage compartment. The original vehicle battery is maintenance-free; do not remove the battery cover or add cleaning fluid. 3. Replacement Notes: The 12-volt battery in hybrid vehicles is located on the driver's side of the luggage compartment. Hybrid vehicles also use a high-voltage battery, which can only be inspected, tested, or replaced by trained maintenance technicians with the appropriate knowledge and tools. When a new 12-volt battery is needed, refer to the replacement number indicated on the original battery label. During replacement, the negative terminal should be disconnected first.
20
1
Share

What is the reason for the Volkswagen mirror heating not responding?

Volkswagen mirror heating not responding because the heating requires some time, you can press the heating button and wait for a while to see if it works. Additionally, if there is no effect for a long time after pressing the switch, you can check whether the fuse is normal. More information about the mirror heating function is as follows: 1. Mirror heating function: When driving in rain, snow, fog, or other weather conditions, the mirror can be heated by the heating wires embedded behind the mirror to ensure the surface of the mirror remains clear. The car mirror heating is generally more suitable for rainy or snowy days. When the mirror is heated, the heater behind the mirror quickly heats the surface, gradually removing rain or fog from the mirror, saving the driver the trouble of frequently wiping the mirror manually, thereby reducing driving risks. 2. Working principle: An electric heating element (heating film) is installed inside the mirror of both side mirrors. In rainy or snowy weather, when the owner turns on the mirror heating function, the heating element will quickly heat up to a fixed temperature within a few minutes, usually between 35-60 degrees Celsius, thereby heating the mirror and removing fog and frost.
6
1
Share

Can Halogen Lights Be Replaced with White Ones?

You can replace halogen lights with white bulbs, but before doing so, check if the original vehicle has a lens. If it does, you can directly replace the bulbs without issues. If there is no lens, you will need to install one. Additionally, you should confirm whether replacing the bulbs with white ones requires any registration or documentation. Any unit or individual must not engage in the following actions: 1. Unauthorized modification of the registered structure of a motor vehicle: It is prohibited to assemble a motor vehicle or modify its registered structure, construction, or features without authorization. 2. Alteration of the motor vehicle model: It is prohibited to change the model, engine number, chassis number, or vehicle identification number. 3. Forgery or use of forged motor vehicle registration certificates: It is prohibited to forge, alter, or use forged or altered motor vehicle registration certificates, license plates, driving licenses, inspection marks, or insurance marks. 4. Use of other motor vehicles' registration documents: It is prohibited to use registration certificates, license plates, driving licenses, inspection marks, or insurance marks belonging to other motor vehicles.
20
1
Share

Is the Domestic Sienna Produced by FAW or GAC?

Toyota Sienna will be domestically produced in 2022, with both FAW Toyota and GAC Toyota commencing production. Below is an introduction to the Sienna: 1. Overview: The Toyota Sienna is a business-oriented vehicle launched by Toyota in 2011. The Sienna is divided into standard and luxury models, with the main configuration differences being the power-sliding doors, roof rack, multifunction steering wheel, chrome-plated rearview mirrors, and front power seat adjustment. 2. Exterior: In terms of overall dimensions, the Sienna surpasses previous Toyota models, positioning it to compete with the Volkswagen T5 and Mercedes-Benz Vito. Its wide body design is well-suited for American conditions, but drivers in China should exercise extra caution when parking and driving. The Sienna's most striking feature is its massive size. 3. Space: The Sienna also excels in storage utilization. Numerous storage compartments and cup holders throughout the vehicle ensure convenience for all passengers. This highlights Toyota's expertise in MPV design—large space alone isn't sufficient; high utilization and flexibility are crucial.
12
5
Share

Why is there water leaking under the engine of the Volkswagen Lavida?

Water leaking under the engine of the Volkswagen Lavida is mainly caused by a rupture in the engine water pipe. More details about the Volkswagen Lavida are as follows: 1. Exterior: The Lavida adopts the unique wheel design of the BlueMotion version, equipped with low rolling resistance tires to reduce fuel consumption. The front grille has also been redesigned, similar to other BlueMotion models. Both the front grille and the rear feature the bluemotion logo, and the taillights have been smoked. The dimensions of the BlueMotion Lavida are 4605mm in length, 1765mm in width, and 1460mm in height, with the wheelbase remaining at 2610mm. 2. Powertrain: The BlueMotion Lavida is equipped with a 1.4TSI engine paired with a 7-speed DSG automatic transmission, featuring energy-saving and environmentally friendly technologies such as Start-Stop and Recuporation (brake energy recovery). The application of Recuporation technology allows the Lavida to recycle braking energy, further improving fuel efficiency.
16
2
Share

What is the purpose of car gold plating?

Car gold plating serves the purposes of anti-static and anti-scratch. Below are relevant details about film application: Precautions for film application: When applying film, it is essential to choose high-quality film and have it installed by a professional shop. Inferior films may not meet light transmittance standards, which can affect the driver's visibility during nighttime driving. It is not recommended to apply film to the front windshield as it may obstruct the driver's view. When applying film to the driver and passenger side windows, two sections should be cut out to ensure clear visibility of the side mirrors. After applying the film, avoid rolling the windows up or down as this may cause the film to peel off. Film lifespan: Generally, car films can last about three years. After removing the film, residual adhesive may remain on the windows. Before removing the adhesive, it is important to soften it for easier removal. Attempting to scrape off the adhesive without softening it first can leave scratches on the glass. After softening the adhesive with alcohol or essential balm, use a plastic scraper to remove it, avoiding hard metal tools that could damage the glass.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.