What is the wading depth of the Toyota Highlander?

What to Do When the Glass Cracks from the Inside?

Glass cracks from the inside can be addressed by following these steps: 1. First, use a blade to remove broken glass pieces and clean with a brush; 2. Begin the repair by attaching the fixing bracket to the damaged area of the windshield, align it properly, and prepare to apply adhesive; 3. Apply a few drops of resin, then pressurize and release the air by twisting the bracket, repeating this process several times until the adhesive fully penetrates the cracks in the glass; 4. Remove the bracket and apply a repair film, then expose it to direct sunlight for 10 minutes; 5. Finally, polish the area using a pure wool polishing pad and polishing paste. Note that not all damages can be repaired. Glass repair solutions are most effective for minor damages. If the glass is already fractured or shattered into pieces, it is beyond repair.

7

2

Share

Can I Continue the Test After Accumulating 12 Points During the Additional License Application Period?

During the additional license application period, if you have not accumulated 12 points, you can continue to apply for the additional license. However, if you accumulate 12 points, you will need to undergo study and testing to clear the points before you can continue the application. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses": Article 15: If you already hold a motor vehicle driving license and apply to add a permitted driving type, you must not have accumulated 12 points in the current scoring cycle and the most recent scoring cycle before the application. For applications to add medium-sized buses, tractors, or large buses as permitted driving types, the following additional regulations apply: To apply for adding medium-sized buses as a permitted driving type, you must have held a license for driving city buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, or three-wheeled cars for at least three years, and must not have accumulated 12 points in the most recent three consecutive scoring cycles before the application. To apply for adding tractors as a permitted driving type, you must have held a license for driving medium-sized buses or large trucks for at least three years, or have held a license for driving large buses for at least one year, and must not have accumulated 12 points in the most recent three consecutive scoring cycles before the application. To apply for adding large buses as a permitted driving type, you must have held a license for driving city buses, medium-sized buses, or large trucks for at least five years, or have held a license for driving tractors for at least two years, and must not have accumulated 12 points in the most recent five consecutive scoring cycles before the application.

15

5

Share

Why is the engine warning light constantly on?

The reasons why the engine warning light stays on are: 1. Excessive carbon deposits inside the engine, leading to poor gasoline atomization, damaged oxygen sensors, or incomplete combustion of gases in the combustion chamber; 2. Damaged spark plugs in the engine, causing cylinder misfires and insufficient power; 3. Damage to components of the vehicle's exhaust system, such as oxygen sensors and the three-way catalytic converter, resulting in substandard vehicle emissions; 4. Overheating of coolant or oil temperature, in which case the vehicle should be pulled over, turned off, and allowed to cool down. If the engine warning light remains on, the owner can try restarting and turning off the vehicle three times in a row, or disconnect the negative terminal of the car battery for 30 seconds before reconnecting it, to check if it's a false fault of the engine. If the warning light persists after these attempts, it is necessary to visit a 4S shop or repair shop to have technicians read and clear the fault codes using diagnostic equipment.

13

5

Share

How to Adjust the Rear Seats of the Buick GL8?

Buick GL8 rear seat adjustment method: The adjustment buttons are located on the left side of the driver's seat, including seat position, lumbar support, and backrest adjustment buttons. First, adjust the seat forward and backward by lifting the seat movement switch upward. Then, adjust the backrest angle by pushing the middle button forward to tilt the backrest forward, and vice versa. Finally, push the lumbar support button forward to adjust the angle of the lumbar position. The Buick GL8 is an MPV launched by SAIC-GM Buick, with dimensions of 5238mm in length, 1878mm in width, and 1776mm in height, and a wheelbase of 3088mm. It is equipped with a 2.0T turbocharged engine and a 9-speed automatic transmission.

17

4

Share

What to Do When the Lynk & Co 01 Displays a Tire Pressure Warning?

Solution for the Lynk & Co 01 displaying a tire pressure warning: You can adjust the reference value of the tire pressure monitoring system through the central display settings. Then, click on the function on the central display to find the tire pressure monitoring system button for calibration. The system will display a message indicating that calibration has started. After calibration is completed, drive the car at a speed of about 30 km/h for approximately ten minutes. The new tire pressure value will then be set, and the tire pressure warning will be eliminated. The Lynk & Co 01 is a compact SUV with dimensions of 4549mm in length, 1860mm in width, and 1689mm in height, with a wheelbase of 2734mm. It is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission.

2

1

Share

How soon after purchasing a new car is it suitable to drive on the highway?

It is suitable to drive on the highway after the new car has run for 1000 kilometers. The engine speed should not be too high, avoid sudden acceleration and braking, and try to maintain a constant speed. If the new car is in the break-in period, high-speed driving, long-distance driving, and fully loaded driving should be avoided. The break-in period is the basic mileage to ensure that the mechanical parts fully contact, friction, and adapt. During this period, the ability of various parts of the car to adapt to the environment can be adjusted and improved, and the protrusions on the parts can be worn off. For a car in the break-in period, it is necessary to control the driving speed and not to drive too fast. After the break-in period, the speed and engine speed can be gradually increased to the maximum speed allowed by the vehicle, and do not press the accelerator pedal too hard to ensure that the pistons, cylinders, and other important parts increase the load in a moderate state.

16

3

Share

What is the wading depth of the Toyota Highlander?

What to Do When the Glass Cracks from the Inside?

Can I Continue the Test After Accumulating 12 Points During the Additional License Application Period?

Why is the engine warning light constantly on?

How to Adjust the Rear Seats of the Buick GL8?

What to Do When the Lynk & Co 01 Displays a Tire Pressure Warning?

How soon after purchasing a new car is it suitable to drive on the highway?

What is the meaning of additional driving license?

Will a Car Left Outside in Winter Get Damaged by Freezing?

What is the charging method for the Zotye E200?

How to Open and Replace the Battery in the Changan CS75 Key?