What is the wading depth of the Tiggo 8?

1 Answers
SanJonathan
07/30/25 7:51am
The maximum wading depth of the Tiggo 8 is 600mm. The wading depth of the Tiggo 8 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Tiggo 8 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. Installing a snorkel can also increase the height of the engine's air intake, thereby improving the maximum wading depth. If wading is unavoidable, the following safe and correct operations should be performed: Before driving through water, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could cause severe damage due to water ingress; Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at a low speed, avoiding sudden acceleration or deceleration; On roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate the water depth before deciding whether to proceed; Be aware of your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and choose an alternative route instead.
Was this review help?
15
4
Share
More Forum Discussions

Why can't the X-Trail's brake be pressed and the car won't start?

Reasons why the X-Trail's brake can't be pressed and the car won't start: The car's vacuum booster pump has malfunctioned; There is an obstruction on the brake pedal; The braking system has failed. Lack of brake fluid: Clean, high-quality brake fluid is fundamental to the safety and good performance of the braking system. Car owners should always purchase the highest quality brake fluid available on the market. If the brake fluid is dirty, drain and flush the entire system, then refill the master cylinder with new fluid. Do not reuse brake fluid; all brake fluid drained from the system should be discarded. Brake system failure: If the brake fluid is consistently low over a long period and the car owner keeps adding more, it is clear that there is a problem with the car's braking system, which needs to be inspected.
16
1
Share

What tires does the Audi Q2L use?

Audi Q2L uses 215/55R17 and 215/50R18 tires. Below are the tire configurations and an introduction to the Audi Q2L: Audi Q2L tire configurations: The 215/55R17 tires are equipped on the base model Audi Q2L, while the high-end model uses 215/50R18 tires. Introduction to the Audi Q2L: The Audi Q2L is a car model under the Audi brand, with dimensions of 4190mm in length, 1790mm in width, and 1510mm in height. The Audi Q2L features the brand's signature hexagonal grille and is equipped with T-shaped LED daytime running lights. The front bumper is accentuated with a silver trim, giving the vehicle a sporty and stylish appearance.
14
4
Share

What are the solutions when the engine malfunction indicator light suddenly comes on?

The solutions when the engine malfunction indicator light suddenly comes on are: 1. Check the working condition of spark plugs and cylinder wires; 2. Perform fuel pressure system inspection; 3. Inspect each cylinder's fuel injector; 4. Examine the fuel pump and fuel pump circuit; 5. Check cylinder pressure, exhaust valve clearance, fuel vapor control solenoid valve, EGR valve cylinder body operation, and intake manifold for leaks. The reasons why the engine malfunction indicator light suddenly illuminates include: 1. Poor gasoline quality leading to incomplete combustion of the air-fuel mixture in the cylinder, resulting in carbon deposits; 2. Excessive engine mileage causing weakened spark plug performance; 3. Mechanical aging of the vehicle; 4. Damage, poor contact, or signal interruption of components such as coolant temperature sensor, crankshaft position sensor, air flow sensor, intake air temperature sensor, and oxygen sensor.
16
0
Share

What do the letters on an automatic transmission gear shift represent?

Automotive automatic transmission gear shift letters represent: 1. P stands for Park, used when the vehicle is parked; 2. R stands for Reverse gear; 3. N stands for Neutral, used during startup, temporary stops while remaining in the vehicle, or when towing; 4. D stands for Drive, used for normal forward driving; 5. S stands for Sport mode. The operation method of an automatic transmission is: 1. Press the brake and push the start button to ignite the engine; 2. Shift into D gear, release the handbrake, then release the foot brake. The working principle of an automatic transmission involves using planetary gear mechanisms to change gears automatically based on throttle pedal position and vehicle speed changes.
8
1
Share

What are the steps to replace car coolant?

The steps to replace car coolant are: 1. Open the vehicle's engine compartment hood, and you can see the coolant reservoir in the upper right corner; 2. Open the coolant drain plug under the radiator to drain the old coolant; 3. Add new coolant, tighten the cap, and the coolant replacement is complete. Functions of coolant: 1. Provides anti-corrosion protection for cooling system components; 2. Prevents scale buildup, avoiding reduced radiator efficiency; 3. Ensures the engine operates within the normal temperature range. Precautions for using coolant: 1. The coolant level needs to be checked regularly and replenished promptly if it falls below the lower limit; 2. Observe whether the coolant has any turbid sediment, and replace it promptly if there is; 3. Different vehicle models have different coolant colors, and they should not be mixed; 4. Before winter, measure the freezing point of the coolant to prevent it from freezing.
20
4
Share

Where is the reversing radar module located on the Kia K2?

The Kia K2 reversing radar control box is located at the rear of the vehicle. The radar main unit is positioned on the radar head attached to the trunk lid, specifically at the left rear of the trunk, on the side with the lights, mounted on the wheel arch sheet metal above the wheel. The unit with five wires connected to it is the one. Here is additional information: 1. Reversing Radar: Its full name is 'Reverse Anti-Collision Radar,' also known as 'Parking Assist Device.' It mainly consists of ultrasonic sensors, a controller, and a display (or buzzer). 2. Automatic Activation of Reversing Radar: When the gear lever is shifted into reverse, the reversing radar automatically starts working. If the radar detects that the distance to an obstacle behind is too close, the buzzer or display device of the reversing radar will issue a warning to remind the driver to pay attention to the rear distance control.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.