What is the wading depth of the Subaru Forester?

1 Answers
SanPaul
07/29/25 3:19pm
Subaru Forester wading depth is 600mm. The relevant introduction about maximum wading depth is as follows: Definition of maximum wading depth: Maximum wading depth refers to the distance between the tire contact point and the engine air intake, known as Wattiefe in English. It indicates the maximum depth a vehicle can safely pass through water under normal driving conditions, also called the safe depth. This is an important indicator for evaluating a vehicle's off-road capability - the greater the wading depth, the better its water-crossing ability. Methods to judge wading depth: When water reaches one-third of the tire height, you can pass through confidently. With proper operation, no unnecessary damage will occur. When water exceeds half of the tire height, extra caution is needed as this may lead to water entering the cabin. If the water level rises above the bumper, drivers should be highly alert to prevent engine water intake.
Was this review help?
4
1
Share
More Forum Discussions

Where is the drainage hole for the Roewe RX5 trunk?

The drainage hole for the Roewe RX5 trunk is located beneath the spare tire in the trunk. Below is more information about the car trunk: 1. Introduction: Car trunks come in different sizes. Generally, they contain the car's spare tire, emergency kit, onboard tool kit, warning triangle, fire extinguisher, car refrigerator, emergency fuel cap release cable, and other equipment. In some high-end models, the starting battery is also placed in the trunk. 2. Function: The rear of a car has a certain space designed to absorb and buffer part of the collision energy in rear-end accidents. This is particularly effective in minor to medium accidents, helping to release and mitigate collision forces, thereby reducing casualties.
13
5
Share

What does the Passat oil warning light indicate?

The Passat oil warning light may illuminate due to insufficient oil level causing low oil pressure; a malfunctioning oil pressure sensor sending incorrect data to the vehicle's computer; faulty wiring harness of the oil pressure sensor; or clogged oil passages within the engine. Below are specific details about the Passat: 1. Historical Background: The Passat (PASSAT) is a mid-size sedan designed by Volkswagen AG in Germany, classified as a B-segment vehicle in Volkswagen's lineup. Since its debut in 1973, the Volkswagen Passat has dominated the global automotive market for over 40 years with its high safety standards, classic design, and top-tier manufacturing quality, selling over 20 million units worldwide. 2. Naming Introduction: It is marketed as Passat in Europe, while in other regions it's known as Dasher, Santana, Magotan, or Quantum.
12
3
Share

How Often Should Spark Plugs Be Replaced? And Why?

Spark plug replacement interval: Under normal maintenance conditions, replacement is recommended after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's advisable to follow the owner's manual. The following standards can be referenced for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Damaged spark plugs can cause the following issues: If spark plugs are damaged, they can directly cause leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and many other problems. The most significant issue is difficulty in ignition, which affects the normal operation of the vehicle. Severe erosion of the spark plug, such as scarring at the top, damage, or melting and erosion of the electrodes, indicates that the spark plug is damaged and should be replaced. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, and remove the high-voltage wires. Mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure the area is clean. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage wires according to the firing order and secure the cover.
18
4
Share

What causes the failure of one door in the central locking system?

Central locking failure in one door may be caused by a damaged door lock motor, broken wiring, or a malfunction in the mechanical transmission device. Details about the central locking system are as follows: 1. Function of central locking: Also known as central control door locks, it enhances convenience in vehicle use and driving safety. 2. Advantages: The wireless remote control feature of car central locking allows for remote unlocking and locking without inserting the key into the keyhole. Its greatest advantage is the ability to conveniently unlock (open) and lock (close) doors from a distance, regardless of day or night, without needing to locate the keyhole.
15
2
Share

How long does it take to receive a traffic violation SMS after running a red light?

After running a red light, the SMS notification for illegal photo capture is usually received within 3 to 7 days, with a maximum delay of around 13 days. However, some cities now offer "instant electronic police capture alerts," where you can receive an SMS notification within 5-10 minutes of being captured. Note that this notification is not equivalent to a confirmed violation; it merely serves as a capture alert. The final determination of whether it constitutes a violation takes 3-7 days. If confirmed as a violation, a follow-up SMS notification will be sent. For violations captured by surveillance cameras, vehicle owners generally do not receive the violation SMS immediately. There is a delay, and the duration may vary. After an electronic camera captures a violation, the relevant violation information must be transmitted through a dedicated channel to the traffic police management center. It is then compiled and forwarded to the relevant traffic police personnel for verification. Once confirmed as a violation, the system automatically retrieves the vehicle owner's phone number based on the license plate information and sends the violation details via SMS. After receiving the violation SMS, the vehicle owner must visit the traffic police department at the location of the violation within one month before the vehicle's annual inspection to address the issue. Generally, if a vehicle owner suspects a violation, they can use 15 days as a benchmark. If no violation SMS is received within 15 days, it is unlikely that the violation was confirmed. Traffic Violation Query Methods: Traffic violation queries refer to checking motor vehicle violations of traffic management regulations via online platforms or query terminals. Methods include website queries, phone queries, SMS queries, and mobile app queries. Website Query: Search for "vehicle violation query" and enter vehicle information to check. Phone Query: Dial local 114 (area code + 114) or 12580 to confirm traffic violations. Violations can only be processed at the location of the violation or the vehicle's license plate issuance authority. For on-the-spot violations (e.g., those caught directly by traffic police), they must be handled at the violation location. SMS Query: Open the SMS composition interface on your phone, enter the violating license plate number in the message body, input 1062650001 as the recipient, and send the message. Mobile App Query: Open the "Traffic Management 12123" app, select "Violation Query," and resolve any outstanding violations.
9
0
Share

Drove 10+ Kilometers with Handbrake On, Need Repairs?

An inspection is necessary. The consequences of driving with the handbrake engaged are as follows: 1. Reduced braking effectiveness: When driving with the handbrake on, the car's operation continuously pulls on the handbrake's steel cable. Prolonged failure to release the handbrake can stretch the cable, leading to diminished braking performance, and the brake pads may fail due to severe wear. 2. Severe tire wear: If the handbrake is not released, the brake pads will constantly rub against the tires, resulting in significant tire wear, which is one of the potential causes of tire blowouts. 3. Increased carbon buildup in the engine and throttle: Driving with the handbrake on puts the car in a braking state, causing the engine to operate under load. This leads to increased carbon deposits, higher fuel consumption, and, over time, potential engine damage.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.