What is the wading depth of the Qiao Ge i?

1 Answers
DeJake
07/30/25 8:34am
The Qiao Ge i does not have a specific wading depth data, but it can briefly exceed the engine side cover, but not the air filter. Below is the relevant introduction: Definition of maximum wading depth: The maximum wading depth refers to the distance between the tire contact point and the engine air intake, known as Wattiefe in English. The maximum wading depth is the greatest depth that can be safely traversed under safe driving conditions, also referred to as the safe depth. It is an important indicator for evaluating a vehicle's off-road capability; the greater the maximum wading depth, the stronger its wading ability. Factors determining wading depth: A vehicle's wading depth is determined by the height of the vehicle's chassis, which is listed as "ground clearance" in the model's parameter configuration table (some models may provide "maximum wading depth"). The greater the ground clearance, the higher the chassis, and the safer the vehicle is when passing through waterlogged roads.
Was this review help?
9
0
Share
More Forum Discussions

How to Open the Trunk Lid?

The methods to open the trunk lid are: 1. Press the button on the key to open the trunk; 2. Press the button on the trunk manually and lift it slightly to open. Methods for trunk maintenance: 1. Use a brush to clean dirt, including the edges and grooves of the trunk, and perform odor treatment after cleaning; 2. Use separate bags for organized storage of items; 3. Lay a trunk mat to prevent dirt or liquids from entering and eroding the trunk surface, while also preventing items inside from sliding, reducing the risk of contamination or damage. Solutions for a trunk that won’t close: 1. Lubricate and adjust the trunk; 2. Clean the trunk’s latch slot; 3. Replace the spring rod with a medium hardness; 4. Check if there are any faults in the trunk’s control circuit; 5. Replace the trunk’s hydraulic support rod.
15
2
Share

How many seconds does the hybrid Accord take to accelerate from 0 to 100 km/h?

The hybrid Accord accelerates from 0 to 100 km/h in 7.5 seconds. Taking the 2021 hybrid Accord as an example, its body structure is a 4-door, 5-seater sedan with dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, a wheelbase of 2830mm, a fuel tank capacity of 48.5 liters, a trunk capacity of 574 liters, and a curb weight of 1619kg. The 2021 hybrid Accord features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, producing a maximum horsepower of 146 PS, a maximum torque of 175 Nm, and a maximum power of 107 kW, paired with an electronic continuously variable transmission.
9
1
Share

What are the symptoms of a bad spark plug in a car?

The symptoms of a bad spark plug in a car are: 1. Difficulty starting and unexplained stalling: Insufficient ignition energy fails to generate high voltage, preventing the ignition of the air-fuel mixture in the cylinder, making the car unable to start. Even if it starts, it may suddenly stall; 2. Lack of power and excessive exhaust emissions: This leads to incomplete combustion of the air-fuel mixture in the engine, resulting in insufficient power, black smoke from the exhaust pipe, and the emission of harmful substances that have not been fully burned, causing excessive exhaust emissions. If the spark plug electrode shows signs of melting, erosion, rounding, or if the insulator has scars, cracks, or carbon deposits, it indicates that the spark plug is damaged. Although the car can still be driven for a short time, it is advisable to replace the spark plug with a new one promptly.
17
5
Share

How many liters can the fuel tank of the Geely Boyue hold?

Geely Boyue's fuel tank can hold 60 liters. Taking the 2021 Geely Boyue as an example, it belongs to the compact SUV category, with body dimensions of: length 4519mm, width 1831mm, height 1694mm, and a wheelbase of 2670mm, with a curb weight of 1575kg. The 2021 Boyue features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.8L turbocharged engine, delivering a maximum horsepower of 163ps, maximum power of 120kw, and maximum torque of 250nm, paired with a 6-speed manual transmission.
8
3
Share

Has the Geely Panda been discontinued?

Geely Panda has been discontinued. Taking the 2016 Geely Panda as an example, its body structure is a 5-door, 4-seat hatchback with dimensions of 3598mm in length, 1630mm in width, and 1465mm in height, a wheelbase of 2340mm, a fuel tank capacity of 35 liters, a trunk capacity of 205 liters, and a curb weight of 937kg. The 2016 Geely Panda features a MacPherson independent front suspension and a torsion beam spiral spring non-independent rear suspension. It is equipped with a 1.0L naturally aspirated engine producing a maximum horsepower of 68PS, a maximum power of 50kW, and a maximum torque of 88Nm, paired with a 5-speed mechanical automatic transmission.
6
0
Share

What documents are required for the first maintenance of Haval H6?

Documents required for the first maintenance include: driver's license; maintenance manual; vehicle registration certificate; warranty manual; owner's ID card; vehicle's driving license; vehicle's purchase invoice, to be taken to the designated first maintenance institution for the vehicle's first maintenance. Important note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial maintenance after the new car has been driven, with the specific time varying by car, generally after driving 1,000 to 3,000 kilometers. The car needs to participate in the first maintenance in time, neither in advance nor delayed. The realization of the first maintenance marks the end of the car's running-in period, and it can now be driven according to the standard load and normal speed required by the car. The time for the first maintenance is calculated based on the date of picking up the car. There are two indicator values for the first maintenance time: mileage and time. Whichever indicator is met first will be the basis. First maintenance items include: oil change, oil filter replacement, cleaning of the air filter, checking whether various oil levels are normal, checking the generator belt, whether the wiper blades are damaged, checking whether the tire pressure is normal, checking whether the tires are damaged or bulging, etc. Time required: It takes about 2 hours to complete all the work. The most important part of the first maintenance for a new car is the oil and oil filter replacement. When changing the oil, the oil filter must be replaced together, and the oil selection must refer to the "Vehicle Use and Maintenance Manual", as different car models specify different oil grades. Maintenance precautions: Do not rinse the inside of the car body with water: Many people will organize and clean their cars by themselves during holidays, rinsing the body with water and scrubbing with a cloth. Here, it is necessary to remind that the inside of the car body does not need to be directly rinsed with water. If the floor mats are dirty, you can use a vacuum cleaner or take them out, brush and wash them with detergent, dry them, and then put them back. There are many through holes in the grooves under the rubber mats on the floor of the cockpit. After water enters, it will not dry by wind but will flow through the through holes to parts such as the gearbox, causing erosion and corrosion. The good practice is to clean with a vacuum cleaner and then scrub with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the car's antifreeze is in short supply, it is recommended that you drain the antifreeze as soon as possible and add the same brand of antifreeze from the beginning. Because the chemical functions of antifreeze vary greatly by brand. Various functional preservatives will corrode other functional preservatives. Different brands of antifreeze use different preservatives. Do not mix them to avoid unnecessary trouble. Do not lubricate the tire bolts and nuts: When the bolts on a running car rust, it is common to oil them so they can work properly again. To prevent the bolts and nuts on the wheels from rusting, some people apply lubricating oil to the bolts and nuts, but this brings necessary risks to safe driving. When the car is driving at high speed, the bolts and nuts are simply lifted or even dropped, leading to driving failure. When promoting the EFI car, do not step on the accelerator: The promoter of the EFI car is different from that of ordinary cars. Its fuel injection control device can actively adjust the fuel supply according to the temperature and working conditions of the promoter, making the promoter smoothly promoted.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.