What is the wading depth of the Land Rover Discovery 4?

2 Answers
DeVivian
09/02/25 3:48am
The maximum wading depth of the Land Rover Discovery 4 is 700mm. The wading depth of the Land Rover Discovery 4 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small vehicles with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Land Rover Discovery 4 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the vehicle from automatically restarting after stalling in water, which could cause severe engine damage due to water intake. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, and other reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed recklessly; consider alternative routes instead.
Was this review help?
7
4
Share
VonEverly
09/14/25 6:01am
I remember when off-roading in the Discovery 4, the official wading depth was about 70cm, which is quite sufficient for easily crossing small riverbeds or post-rain puddles. But I must remind you, in actual operation, don't just rely on the numbers—environmental factors matter too. For instance, if the water is deep and flowing too fast, it can easily lead to trouble. From my experience, drive slowly and steadily, maintaining a stable engine RPM. Avoid stomping on the accelerator to prevent splashing water, which could enter the air intake. It's best to install a snorkel for added protection or regularly check the vehicle's seals to ensure the electrical systems stay dry. After wading, promptly inspect the undercarriage for any mud or sand buildup—this helps prolong your car's lifespan. Driving at this depth gives me confidence across various terrains, letting me enjoy the true thrill of off-roading. But safety always comes first—never take risks if you're unsure of the water depth. Using a stick to measure it first makes for a much more reassuring drive.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

How to Read the Fuel Gauge on a CRV?

After starting the engine, observe the position of the fuel gauge needle on the right side. If the tank is full, the needle will point to the blue area. Generally, when it reaches the red line, it means the fuel is almost empty. Below is an introduction to the Honda CRV: 1. The Honda CRV is a classic urban SUV model produced by Dongfeng Honda. The 2015 CRV features a sporty and stylish exterior design, paired with Michelin Latitude series SUV tires, offering excellent handling performance. 2. The exterior is stylish and dynamic, with smooth lines that maintain a sporty feel without losing its rounded elegance. The materials and craftsmanship have been improved; the configuration is good; the power is strong; the handling is flexible; and it offers high cost-effectiveness. The overall driving and passenger space is spacious and ample, with no noticeable tightness in head or legroom. The interior storage space is abundant and practical. The seats are well-padded, providing good comfort, and the rear seats are slightly adjustable, making them more practical for long-distance travel. 3. The interior adopts Honda's family style, with a two-tone design that is warm and clean. The three-spoke steering wheel has a good feel, and the configuration is practical, with improved materials and craftsmanship.
18
2
Share

How much does the Guangben Civic weigh?

Generally, the weight is over 1.2 tons. Below is some related information about the Honda Civic: 1. There are a total of 16 Honda Civic models currently on sale, featuring 2 engine displacements (1.0T and 1.5T) and 2 transmission options (manual and continuously variable transmission). The engine delivers a maximum power of 130.0kW, maximum horsepower of 177PS, and maximum torque of 226.0N.m. 2. Since the release of Honda's new-generation Civic design language, almost all models have inherited the front face and side design elements of the Civic, demonstrating the tremendous success of the Civic's styling. It almost represents the overall design trend of Honda's new-generation models. The Civic not only boasts high aesthetics but also offers a spacious interior with ample storage compartments. The rear seating area is also very roomy, providing excellent comfort for passengers.
16
3
Share

How to Apply Crystal Coating to a Car?

Crystal coating steps are as follows: 1. First, park the car in a sheltered environment, wet the vehicle's paint surface with water, then apply foam and use a wool glove dipped in foam to wash off the dirt on the car's paint surface. 2. Use clay bar with QD liquid to further clean the car's paint surface. The clay bar can adsorb fine dust on the paint surface, making the paint smooth. After using the clay bar, thoroughly rinse and dry the car. If conditions permit, perform a full-body polishing before applying crystal coating for better results. 3. After completing the above steps, you can start applying the crystal coating. Each crystal coating product comes with a special sponge and a small cloth. Wrap the sponge with the cloth, then drip a few drops of the crystal coating liquid onto the cloth-wrapped sponge. Apply it evenly in straight lines or a crisscross pattern on the car's paint surface, ensuring no areas are missed.
20
5
Share

Where is the throttle body located?

The throttle body of a car is located behind the air filter in the intake system and in front of the intake manifold. Here are specific details about the throttle body: 1. The throttle body is the throat of the engine, controlling the amount of air entering the engine. When the driver presses the accelerator pedal, it doesn't directly control fuel injection but rather adjusts the opening of the throttle body. 2. The throttle body is a controllable valve that regulates air entry into the engine. After entering the intake pipe, the air mixes with gasoline to form a combustible mixture for combustion and power generation. It connects to the air filter at the top and the engine block at the bottom.
6
5
Share

What brand is the OPEN-COUNTRY tire?

OPEN-COUNTRY is a city SUV tire under Toyo Tires, which belongs to the Toyo Rubber Industry Group. OPEN-COUNTRY belongs to the SUV series, with main models including: OPEN-COUNTRY M/T, OPEN-COUNTRY H/T, and PROXES ST. More details are as follows: 1. OPEN-COUNTRY H/T is a tire that combines durability and comfort, featuring a unique tread pattern design that enhances the tire's quietness. Especially, the design of the main grooves improves braking performance on wet surfaces. 2. OPEN-COUNTRY A/T-II adopts a robust tread pattern design, utilizing a new wear-resistant tread compound formula that includes smaller particle size carbon black and wear-resistant polymer formulations, effectively increasing the tire's wear life.
18
0
Share

Can car maintenance only be done at the 4S store where the car was purchased?

Maintenance does not have to be done at the 4S store where the car was purchased. Because all brand 4S stores are nationwide warranty, so you can go to any 4S store of the purchased brand for maintenance. Of course, car maintenance can also be carried out in professional auto repair shops or general repair shops. The following is an introduction about car maintenance: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting or replacing certain parts of the car, also known as car maintenance. 2. Modern car maintenance mainly includes the maintenance scope of the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. The purpose of car maintenance is to keep the car clean and tidy, maintain normal technical conditions, eliminate hidden dangers to prevent failures, slow down the deterioration process, and extend the service life.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.